Auto‐Oxidative Coupling of Glycine Derivatives

The unprecedented title reaction between glycine derivatives and indoles, as well as the auto‐oxidative Povarov/aromatization tandem reaction of glycine derivatives with olefins are described. The reactions were performed in the absence of redox‐active catalysts and chemical oxidants under mild reaction conditions. Only simple organic solvents and air (or O₂) were required.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.     

分子氧为氧化剂磷钒酸盐为催化剂超深度氧化脱除柴油中的二苯并噻吩

一种“双帽Keggin型”磷钒酸盐在温和的反应条件下以分子氧为氧化剂氧化二苯并噻吩至二苯并噻吩砜的反应中表现出很高的催化活性. 用溶剂萃取或者选择吸附等方法可轻易地将反应产生的二苯并噻吩砜从油品中除去. 这提供了一种新型的分子氧为氧化剂的超深度氧化脱硫方法.     

Vulcanization kinetics of graphene/styrene butadiene rubber nanocomposites

This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.     

Efficient side-chain modification of dextran via base-catalyzed epoxide ring-opening and thiol-ene click chemistry in aqueous media

In this study, a novel approach by combining base-catalyzed epoxide ring-opening and thiol-ene click chemistry is presented for the side-chain modification of dextran. The vinyl-modified dextran is prepared by a basic epoxide ring opening reaction of allyl glycidyl ether in 0.1 mol/L NaOH, followed by thiol-addition click reaction of three model sulfhydryl compounds using water-soluble Irgacure 2959 as the photoinitiator, leading to side-chain functionalized dextran modified with carboxyl, bidentate dicarboxyl or amino groups. This is the first example of combining epoxide ring-opening and thiol- ene click chemistry for side-chain modification of dextran in aqueous media. Importantly, it may also be extended as a convenient and efficient method for the side-chain modification of other polysaccharides.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Facile synthesis of 4-vinylpyridine-based hydrogels via laser-ignited frontal polymerization and their performance on ion removal

We report herein the fabrication of poly(AAM-co-4VP) hydrogels (AAM?=?acrylamide, 4VP?=?4-vinylpyridine) by using laser-ignited frontal polymerization (LIFP) in an easy and rapid way. The appropriate amounts of AAM, 4VP, γ-methacryloxypropyltrimethoxysilane-modified nanosilica, and couple redox initiator of ammonium persulfate/N,N,N′,N′-tetramethylethylenediamine were mixed together in the presence of dimethylsulfoxide as solvent. LIFP was initiated by heating the upper side of the mixture with the laser. Once initiated, no further energy or treatment was required for the following polymerization to occur. A variety of features for the preparation of hydrogels, such as the initiator concentration and the ratio of different monomers, were thoroughly investigated. The morphology and swelling behavior of hydrogels were investigated. For comparison, the hydrogels prepared via traditional thermal frontal polymerization were also presented and discussed. Furthermore, the hydrogels possess absorption capacity towards copper ions, which can be applied to remove heavy metals.     

Ring-opening polymerisation of ɛ-caprolactone catalysed by Brønsted acids

Two new Brønsted acids [2,2′-ethylidene-bis (4,6-di-tert-butylphenol)] phosphoric acid (EDBPPOOH) and (3,3′,5,5′-tetra-tert-butylbiphenyl-2,2′-diol) phosphoric acid (TBPO-POOH) were synthesised and fully characterised by ¹H NMR and ¹³C NMR spectra and mass spectra. The ringopening polymerisation (ROP) of ?-caprolactone (?-CL) catalysed by the two Brønsted acids proceeded at 110°C without a solvent or at ambient temperature in toluene. Experimental results indicated that the two Brønsted acids were efficient catalysts for the ROP of ?-CL with moderate number-average molar mass (Mn) and narrow polydispersity indices (PDI). The catalytic activity of TBPO-POOH is higher than EDBP-POOH in the ROP of ?-CL. After benzyl alcohol was added, it was able to accelerate the polymerisation process. The polymerisation can also occur with the addition of water with a monomer/catalyst/initiator mole ratio of 100: 1: 1. The living polymerisation was ascertained by the linear relationships of the Mn vs. monomer conversion, then it was further confirmed by a second-feed experiment of a double monomer producing double Mn. A kinetic study of the relationships between monomer concentration and time revealed a first-order dependence on monomer concentration in the polymerisation. End-group analysis of ¹H NMR spectra and electrospray-ionisation mass spectra suggests that the two Brønsted acids are capable of catalysing and initiating the ROP of ?-CL.     

聚合物锂离子电池界面相容性的研究进展

聚合物锂离子电池作为储能装置在电子产品中具有广泛的应用前景。电极/聚合物电解质(E/P)界面相容性是影响聚合物锂离子电池电导率、安全性、机械性能的重要影响因素之一。研究E/P界面的电化学反应及形成机理,是解决相容性问题的关键。本文综述了近年来有关聚合物锂离子电池E/P界面相容性及相关研究技术的进展,并对聚合物锂离子电池界面相容性的相关研究进行了展望。