Vulcanization kinetics of graphene/styrene butadiene rubber nanocomposites

This paper presents the influence of graphene on the vulcanization kinetics of styrene butadiene rubber （SBR） with dicumyl peroxide. A curemeter and a differential scanning calorimeter were used to investigate the cure kinetics, from which the kinetic parameters and apparent activation energy were obtained. It turns out that with increasing graphene loading, the induction period of the vulcanization process of SBR is remarkably reduced at low graphene loading and then levels off; on the other hand, the optimum cure time shows a monotonous decrease. As a result, the vulcanization rate is suppressed at first and then accelerated, and the corresponding activation energy increases slightly at first and then decreases. Upon adding graphene, the crosslinking density of the nanocomposites increases, because graphene takes part in the vulcanization process.     

Efficient side-chain modification of dextran via base-catalyzed epoxide ring-opening and thiol-ene click chemistry in aqueous media

In this study, a novel approach by combining base-catalyzed epoxide ring-opening and thiol-ene click chemistry is presented for the side-chain modification of dextran. The vinyl-modified dextran is prepared by a basic epoxide ring opening reaction of allyl glycidyl ether in 0.1 mol/L NaOH, followed by thiol-addition click reaction of three model sulfhydryl compounds using water-soluble Irgacure 2959 as the photoinitiator, leading to side-chain functionalized dextran modified with carboxyl, bidentate dicarboxyl or amino groups. This is the first example of combining epoxide ring-opening and thiol- ene click chemistry for side-chain modification of dextran in aqueous media. Importantly, it may also be extended as a convenient and efficient method for the side-chain modification of other polysaccharides.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

Microstructure characterization of short-chain branching polyethylene with differential scanning calorimetry and successive selfnucleation/annealing thermal fractionation

A series of the copolymers of ethylene with 1-hexene(M1–M9) synthesized by metallocene catalyst Et[Ind]2ZrCl2/MAO was studied by differential scanning calorimetry and successive self-nucleation and annealing(SSA) thermal fractionation. The distribution of methylene sequence length(MSL) in the different copolymers was determined using the SSA method. The comonomer contents of samples M4 and M5 are 2.04 mol% and 2.78 mol%, respectively. Both M4 and M5 have low comonomer content and their MSL distribution profiles exhibit a monotonous increase trend with their MSL. The longest MSL of M5 is 167, and its corresponding molar percent is 43.95%, which is higher than that of M4. Moreover, the melting temperature(Tm) of M5 is also higher than that of M4. The comonomer contents of samples M7, M8, and M9 are 8.73 mol%, 14.18 mol% and 15.05 mol%, respectively. M7, M8, and M9 have high comonomer contents, and their MSL distribution profiles display unimodality. M7 has a lower peak value of 33 and a narrow MSL distribution, resulting in a Tm lower than that of M8 and M9. The MSL and its distribution are also key points that influence the melting behavior of copolymers. Sometimes, MSL and its distribution of copolymers have a greater impact on it than the total comonomer contents, which is different from traditional views.     

Facile synthesis of 4-vinylpyridine-based hydrogels via laser-ignited frontal polymerization and their performance on ion removal

We report herein the fabrication of poly(AAM-co-4VP) hydrogels (AAM?=?acrylamide, 4VP?=?4-vinylpyridine) by using laser-ignited frontal polymerization (LIFP) in an easy and rapid way. The appropriate amounts of AAM, 4VP, γ-methacryloxypropyltrimethoxysilane-modified nanosilica, and couple redox initiator of ammonium persulfate/N,N,N′,N′-tetramethylethylenediamine were mixed together in the presence of dimethylsulfoxide as solvent. LIFP was initiated by heating the upper side of the mixture with the laser. Once initiated, no further energy or treatment was required for the following polymerization to occur. A variety of features for the preparation of hydrogels, such as the initiator concentration and the ratio of different monomers, were thoroughly investigated. The morphology and swelling behavior of hydrogels were investigated. For comparison, the hydrogels prepared via traditional thermal frontal polymerization were also presented and discussed. Furthermore, the hydrogels possess absorption capacity towards copper ions, which can be applied to remove heavy metals.     

Ring-opening polymerisation of ɛ-caprolactone catalysed by Brønsted acids

Two new Brønsted acids [2,2′-ethylidene-bis (4,6-di-tert-butylphenol)] phosphoric acid (EDBPPOOH) and (3,3′,5,5′-tetra-tert-butylbiphenyl-2,2′-diol) phosphoric acid (TBPO-POOH) were synthesised and fully characterised by ¹H NMR and ¹³C NMR spectra and mass spectra. The ringopening polymerisation (ROP) of ?-caprolactone (?-CL) catalysed by the two Brønsted acids proceeded at 110°C without a solvent or at ambient temperature in toluene. Experimental results indicated that the two Brønsted acids were efficient catalysts for the ROP of ?-CL with moderate number-average molar mass (Mn) and narrow polydispersity indices (PDI). The catalytic activity of TBPO-POOH is higher than EDBP-POOH in the ROP of ?-CL. After benzyl alcohol was added, it was able to accelerate the polymerisation process. The polymerisation can also occur with the addition of water with a monomer/catalyst/initiator mole ratio of 100: 1: 1. The living polymerisation was ascertained by the linear relationships of the Mn vs. monomer conversion, then it was further confirmed by a second-feed experiment of a double monomer producing double Mn. A kinetic study of the relationships between monomer concentration and time revealed a first-order dependence on monomer concentration in the polymerisation. End-group analysis of ¹H NMR spectra and electrospray-ionisation mass spectra suggests that the two Brønsted acids are capable of catalysing and initiating the ROP of ?-CL.     

聚合物锂离子电池界面相容性的研究进展

聚合物锂离子电池作为储能装置在电子产品中具有广泛的应用前景。电极/聚合物电解质(E/P)界面相容性是影响聚合物锂离子电池电导率、安全性、机械性能的重要影响因素之一。研究E/P界面的电化学反应及形成机理,是解决相容性问题的关键。本文综述了近年来有关聚合物锂离子电池E/P界面相容性及相关研究技术的进展,并对聚合物锂离子电池界面相容性的相关研究进行了展望。     

Synthesis and structure of novel 6-(pyrazol-1-yl)-4-methyl-1H-pyrazolo[3,4-b]pyridin-3-ol derivatives

New 6-(pyrazol-1-yl)pyrazolo[3,4-b]pyridin-3-ol compounds were synthesized by cyclization reaction from 2,6-dichloro-4-methylnicotinonitrile. Their derivatives exist as the 3-hydroxy tautomer. The structure of the compound 1a of one of the resulting compounds was studied in detail by X-ray diffraction.     

Catalytic oxidation of NO over Mn–Co–Ce–Ox catalysts: effect of reaction conditions

Manganese–cobalt–cerium oxide (Mn–Co–Ce–Ox) catalysts were synthesized by the co-precipitation method and tested for activity in low-temperature catalytic oxidation of NO in the presence of excess O₂. With the best Mn–Co–Ce mixed-oxide catalyst, approximately 80 % NO conversion was achieved at 150 °C and a space velocity of 35,000 h^?1. The effect of reaction conditions (reaction temperature, volume fractions of NO and O₂, gas hourly space velocity (GHSV), and catalyst stability) was investigated. The optimum reaction temperature was 150 °C. Increasing the O₂ content above 3 % results in almost no improvement of NO oxidation. This catalyst enables highly effective removal of NO within a wide range of GHSV. Furthermore, the stability of the Me–Co–Ce–Ox catalyst was excellent; no noticeable decrease of NO conversion was observed in 40 h.     

A Hydrogen-Deficient Nickel–Cobalt Double Hydroxide for Photocatalytic Overall Water Splitting

Developing highly efficient and low-cost photocatalysts for overall water splitting has long been a pursuit for converting solar power into clean hydrogen energy. Herein, we demonstrate that a nonstoichiometric nickel–cobalt double hydroxide can achieve overall water splitting by itself upon solar light irradiation, avoiding the consumption of noble-metal co-catalysts. We employed an intensive laser to ablate a NiCo alloy target immersed in alkaline solution, and produced so-called L-NiCo nanosheets with a nonstoichiometric composition and O²⁻/Co³⁺ ions exposed on the surface. The nonstoichiometric composition broadens the band gap, while O²⁻ and Co³⁺ ions boost hydrogen and oxygen evolution, respectively. As such, the photocatalyst achieves a H₂ evolution rate of 1.7 μmol h⁻¹ under AM 1.5G sunlight irradiation and an apparent quantum yield (AQE) of 1.38 % at 380 nm.