Synthesis and studies of antibacterial activity of pongaglabol

Pongaglabol [8-hydroxy-5-phenyl-furo[2,3-h]benzo(b)pyran-7-one] was synthesized and tested for antibacterial effects againstShigella dysenteriae, Salmonella typhi, Streptococcus β-haemolyticus andStaphylococcus aureus. The synthesized compounds were characterized using UV, IR and¹H NMR spectral data     

A rapid and accurate 3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide colorimetric assay for quantification of bacteriocins with nisin as an example

The objective of this study is to propose a more accurate and faster MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] colorimetric assay (MCA) for quantitative measurement of polypeptide bacteriocins in solutions with nisin as an example. After an initial incubation of nisin and indicator bacterium Micrococcus luteus NCIB 8166 in tubes, MTT was added for another incubation period. After that, nisin was quantified by estimating the number of viable bacteria based on measuring the amount of purple formazan produced by cleavage of yellow tetrazolium salt MTT. Then MCA was compared to a standard agar diffusion assay (ADA). The results suggested a high correlation coefficient (r ²=0.975±0.004) between optical density (OD) and the inhibitory effect of nisin on a bacterial strain Micrococcus luteus NCIB 8166 at a range of 0.125~32 IU/ml. The MCA described in this study was very quick. Quantification of nisin took only 7~8 h and the detection limit was at the level of 0.125 IU/ml when compared to 12 IU/ml and 24~28 h for ADA. The MCA provides an accurate and rapid method for quantification of nisin in solutions and is expected to be used for quantification of other antimicrobial substances.     

Kinetics and mechanism of polymerization of methyl methacrylate initiated by stibonium ylide

Homopolymerization of methyl methacrylate (MMA) was carried out in the presence of triphenylstibonium 1,2,3,4-tetraphenyl-cyclopentadienylide as an initiator in dioxane at 65°C±0·l°C. The system follows non-ideal radical kinetics (R _p ∝ [M]^1·4 [I]^0·44 @#@) due to primary radical termination as well as degradative chain-transfer reaction. The overall activation energy and average value ofk ₂ ^p /k _t were 64 kJmol⁻¹ and 0.173 × 10⁻³ 1 mol⁻¹ s⁻¹ respectively     

Kinetics and mechanism of the reactions of hexaaqua rhodium (III) with sulphur (IV) in aqueous medium

An O-bonded sulphito complex, Rh(OH₂)₅(OSO₂H)²⁺, is reversibly formed in the stoppedflow time scale when Rh(OH₂) ₆ ³⁺ and SO₂/HSO ₃ ⁻ buffer (1 <pH< 3) are allowed to react. For Rh(OH₂)₅OH₂₊+ SO₂ □ Rh(OH₂)₅(OSO₂H)²⁺ (k₁/k_-1), k₁ = (2.2 ±0.2) × 10³ dm³ mol⁻¹ s⁻¹, k₋1 = 0.58 ±0.16 s⁻¹ (25°C,I = 0.5 mol dm⁻³). The protonated O-sulphito complex is a moderate acid (K _d = 3 × 10⁻⁴ mol dm⁻³, 25°C, I= 0.5 mol dm⁻³). This complex undergoes (O, O) chelation by the bound bisulphite withk= 1.4 × 10⁻³ s⁻¹ (31°C) to Rh(OH₂)₄(O₂SO)⁺ and the chelated sulphito complex takes up another HSO ₃ ⁻ in a fast equilibrium step to yield Rh(OH₂)₃(O₂SO)(OSO₂H) which further undergoes intramolecular ligand isomerisation to the S-bonded sulphito complex: Rh(OH₂)₃(O₂SO)(OSO₂)^- → Rh(OH₂)₃(O₂SO)(SO₃)⁻ (k _iso = 3 × 10⁻⁴ s⁻¹, 31°C). A dinuclear (μ-O, O) sulphite-bridged complex, Na₄[Rh₂(μ-OH)₂(OH)₂(μ-OS(O)O)(O₂SO)(SO₃) (OH₂)]5H₂O with (O, O) chelated and S-bonded sulphites has been isolated and characterized. This complex is sparingly soluble in water and most organic solvents and very stable to acid-catalysed decomposition     

Analysis of transient wave scattering from an inclusion with an unilateral smoothly contact interface by BEM

Summary A 2D time-domain Boundary Element Method (BEM) is applied to solve the problem of transient scattering of plane waves by an inclusion with a unilateral smooth contact interface. The incident wave is assumed strong enough so that localized separations take place along the interface. The present problem is indeed a nonlinear boundary value problem since the mixed boundary conditions involve unknown intervals (separation and contact regions). In order to determine the unknown intervals, an iterative technique is developed. As an example, we consider the scattering of plane waves by the cross section of a circular cylinder embedded in an infinite solid. Numerical results for the near field solutions are presented. The distortion of the response waves and the variation of the interface states are discussed. The financial support by the China National Natural Science Foundation under Grant No. 19872001 and No. 59878004 is gratefully acknowledged. The second author is also grateful to the support of the National Science Fund for Distinguished Young Scholars under Grant No. 10025211.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

Amniotic membrane transplantation for porous sphere orbital implant exposure

Objective: This study is aimed at describing the clinical outcome of amniotic membrane transplantation for exposure of porous sphere implants. Methods: A retrospective review of consecutive cases of porous sphere orbital implant exposure was carried out. Eight cases were presented between May 2004 and Oct. 2006 (5 males, 3 females; mean age 44.5 years). Six had enucleation and two had evisceration. Exposure occurred in two primary and six secondary. Orbital implant diameter was 22 mm in seven cases and 20 mm in one case. Six patients are with hydroxyapatite and two with high-density porous polyethylene (Medpor) orbital implants. The mean time from implantation to exposure was 1.1 months (range 0.8~2 months). All patients required surgical intervention. Results: The time of follow-up ranged from 3.0 to 28.0 months (mean 16.5 months). Amniotic membrane grafting successfully closed the defect without re-exposure in all of these patients. The grafts were left bare with a mean time to conjunctiva of about 1 month (range 0.8~1.5 months). Conclusion: Exposed porous sphere implants were treated successfully with amniotic membrane graft in all of patients. The graft is easy to harvest. This technique is useful, dose not lead to prolonged socket inflammation and infection, and it is valuable application extensively.     

浅谈利用任务驱动法进行单片机教学与职业核心能力的培养

本文就任务驱动法在单片机教学中的应用与职业核心能力培养进行了阐述，并且以实例的形式得到了很好的验证。     

Adsorption of dicarboxylates on nano-sized gibbsite particles: effects of ligand structure on bonding mechanisms

The adsorption of the dicarboxylates o-phthalate, maleate, fumarate, malonate, and oxalate (representing ligands with the general composition ⁻O₂C---C_n---CO₂⁻; n=0, 1, or 2) on gibbsite were studied by means of quantitative batch adsorption experiments and attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The interpretations of ATR-FTIR spectra were aided by comparison with IR spectra of solution species and by results from theoretical frequency calculations. The main objectives of the study were to identify the molecular level bonding mechanisms of the dicarboxylates to gibbsite, and to investigate how these were influenced by the composition and structure of the ligands. Carboxylates with n=2 formed predominantly outer sphere complexes, whereas the importance of inner sphere complexes progressively increased for n=1 and 0. The inner sphere structures were identified as mononuclear chelates with one oxygen from each carboxylate group bonded to Al(III) at the surface. This showed the importance of chelate ring structure for the formation of inner sphere surface complexes, with stabilities of the complexes increasing in the order seven-membered ring less than six-membered ring less than five-membered ring. For ligands with n=2 only small variations in surface speciation were observed as a function of steric factors; irrespective of the relative positions of the carboxylate groups and bulkiness of the ligands outer sphere bonding is the dominating adsorption mode. Adsorption experiments were also conducted with gibbsite particles exhibiting differences in shape and surface roughness. These experiments showed that inner sphere complexes were favored on the less well-developed and more irregular gibbsite particles.