Isomeric anthracene diimide polymers

N-type semiconducting polymers are attractive for organic electronics, but desirable electron-deficient units for synthesizing such polymers are still lacking. As a cousin of rylene diimides such as naphthalene diimide (NDI) and perylene diimide (PDI), anthracene diimide (ADI) is a promising candidate; its polymers, however, have not been achieved yet because of synthetic challenges for its polymerizable monomers. Herein, we present ingenious synthesis of two dibromide ADI monomers with dibromination at differently symmetrical positions of the ADI core, which are further employed to construct ADI polymers. More interestingly, the two obtained ADI polymers possess the same main-chain and alkyl-chain structures but different backbone conformations owing to varied linking positions between repeating units. This feature enables their different optoelectronic properties and film-state packing behavior. The ADI polymers offer first examples of conjugated polymer conformational isomers and are highly promising as a new class of n-type semiconductors for various organic electronics applications.

Two anthracene diimide (ADI) polymers with the backbone conformational isomerism, new members of aromatic diimide polymers family, have been synthesized as a class of highly promising n-type semiconductors for organic electronics.     

Identification,Characterization and Antihypertensive Effect In Vivo of a Novel ACE-Inhibitory Heptapeptide from Defatted Areca Nut Kernel Globulin Hydrolysates

The areca (Areca catechu L.) nut kernel (ANK) is a good potential protein source for its high protein content of 9.89–14.62 g/100 g and a high yield of around 300,000 tons per year in China. However, utilization of the areca nut kernel is limited. To expand the usage of ANK in pharmaceutical or foods industries, areca nut kernel globulin was extracted and angiotensin-I converting enzyme (ACE) inhibition peptides were prepared and identified using gel chromatography, reversed phase HPLC separation, UPLC-ESI-MS/MS analysis and in silico screening. Finally, a novel ACE-inhibitory heptapeptide (Ala–Pro–Lys–Ile–Glu–Glu–Val) was identified and chemically synthesized. The combination pattern between APKIEEV and ACE, and the inhibition kinetics, antihypertensive effect and endothlein-1 inhibition activity of APKIEEV were studied. The results of the molecular docking demonstrated that APKIEEV could bind to four active sites (not the key active sites) of ACE via short hydrogen bonds and demonstrated high ACE-inhibitory activity (IC₅₀: 550.41 μmol/L). Moreover, APKIEEV exhibited a significantly lowering effect on both the systolic blood pressure and diastolic blood pressure of spontaneously hypertensive rats, and had considerable suppression ability on intracellular endothelin-1. These results highlight the potential usage of APKIEEV as ingredients of antihypertensive drugs or functional foods.     

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers ( 1-Cd , 1-Zn , 2-Cd , 2-Zn ) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂²⁺ in water.     

Ni-Catalyzed Regioselective Hydroarylation of 1-Aryl-1,3-Butadienes with Aryl Halides

An efficient nickel-catalyzed regioselective hydroarylation of 1,3-dienes with aryl halides and a silane has been developed, affording a range of allylic arenes in good to excellent yields under mild conditions. This method exhibits broad substrate scope, and excellent functional group tolerance. Late-stage modification of complex architectures was demonstrated.     

Emerging Design Principle of Near-Infrared Upconversion Sensitizer Based on Mitochondria-Targeted Organic Dye for Enhanced Photodynamic Therapy

Upconversion luminescent (UCL) triggered photodynamic therapy (PDT) affords superior outcome for cancer treatment. However, conventional UCL materials which all work by a multiphoton absorption (MPA) process inevitably need extremely high power density far over the maximum permissible exposure (MPE) to laser. Here, a one-photon absorption molecular upconversion sensitizer Cy5.5-Br based on frequency upconversion luminescent (FUCL) is designed for PDT. The unusual super heavy atom effect (SHAE) in Cy5.5-Br strongly enhances its spin-orbit coupling (0.23 cm⁻¹), triplet quantum yield (11.1 %) and triplet state lifetime (18.8 μs) while the potential hot-band absorption of Cy5.5-Br is well maintained. Importantly, Cy5.5-Br can efficiently target the tumour site and kill cancer cells by destroying mitochondria under a biosafety MPE to 808 nm laser. The photostability and antitumor results are obviously superior to that of a Stokes process. This work provides a design criterion for FUCL dyes to realize effective PDT upon a biosafety optical density, possibly bringing more clinical benefits than conventional MPA materials.     

Chiral separation and molecular simulation study of six antihistamine agents on a coated cellulose tri-(3,5-dimethylphenycarbamate) column (Chiralcel OD-RH) and its recognition mechanisms

Enantiomeric separation of six antihistamine agents was first systematically investigated on a cellulose-based chiral stationary phase (CSP), that is, cellulose tris-(3,5-dimethyl phenyl carbamate) (Chiralcel OD-RH), under the reversed-phase mode. Orphenadrine, meclizine, terfenadine, dioxopromethazine, and carbinoxamine enantiomers were completely separated under the optimized mobile phase conditions with resolutions of 5.02, 1.93, 1.68, 1.67, and 1.54, respectively. Mequitazine was partially separated with a resolution of 0.77. The influences of type and concentration of buffer salt, the pH of buffer solution, and the type and ratio of organic modifier on the chiral separation were evaluated and optimized. For a better insight into the enantiorecognition mechanisms, molecular docking was carried out via the Autodock software. The lowest binding energy and the optimal conformations of the analytes/CSP complexes were supplied, and the mechanisms of chiral recognition were determined. According to the results, the key interactions for the chiral recognition of these six analytes on CDMPC were π–π interactions, hydrophobic interactions, hydrogen bond interactions, and some special interactions.     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

Preparation,Bioactivities and Applications in Food Industry of Chitosan-Based Maillard Products: A Review

Chitosan, a biopolymer possessing numerous interesting bioactivities and excellent technological properties, has received great attention from scientists in different fields including the food industry, pharmacy, medicine, and environmental fields. A series of recent studies have reported exciting results about improvement of the properties of chitosan using the Maillard reaction. However, there is a lack of a systemic review about the preparation, bioactivities and applications in food industry of chitosan-based Maillard reaction products (CMRPs). The presence of free amino groups in chitosan allows it to acquire some stronger or new functional properties via the Maillard reaction. The present review aims to focus on the current research status of synthesis, optimization and structural identification of CMRPs. The applications of CMRPs in the food industry are also discussed according to their biological and technological properties such as antioxidant, antimicrobial activities and inducing conformational changes of allergens in food. Some promising directions for future research are proposed in this review, aiming to provide theoretical guidance for the further development of chitosan and its derivatives.     

Rapid Preparation of Mesoporous Methylsilsesquioxane Aerogels by Microwave Heating Technology

Microwave heating technology is known as an alternative to traditional gas and electric heating sources. In this work, mesoporous methylsilsesquioxane (MSQ) aerogels were prepared via a sol–gel process accompanied by microwave heating technology, and microwave heating was used in the gelation of sol and the drying of wet gels, respectively. The effects of hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, hydrochloric acid (HCl) as a catalyst, ethanol as a solvent, sodium hydroxide (NaOH) as a gelation agent, and microwave power on the pore structure of as-prepared MSQ aerogels were investigated in detail. Microwave heating at low power results in the acceleration of sol–gel transition and achieves the gelation within a few minutes. Appropriate amounts of chemical reagents and microwave heating at high power allow the preparation of mesoporous MSQ aerogels with a BET-specific surface area of 681.6 m²·g⁻¹ and a mesopore size of 19 nm, and the resultant MSQ aerogel still has a BET specific surface area as high as 134 m²·g⁻¹ after heat treatment at 600 °C for 2 h, showing high thermal stability. The MSQ aerogels/fibre composite possesses a low thermal conductivity of 0.039 W/(m·k)⁻¹, displaying good thermal insulation. Microwave heating technology is a promising heating method for the preparation of other aerogels.     

Mo2C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂C/reduced graphene oxide (Mo₂C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m⁻², which was considerably higher than that of CP-MFC (926.8±6.3 mW m⁻²). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria–electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).