Highly efficient toughening effect of ultrafine full-vulcanized powdered rubber on poly(lactic acid)(PLA)

A unique ultrafine full-vulcanized powdered ethyl acrylate rubber (EA-UFPR) was used as the toughening modifier for poly (lactic acid) (PLA). Largely improved tensile toughness was successfully achieved with the incorporation of only 1 wt% EA-UFPR, while the tensile strength and modulus of the blends were almost the same as pure PLA. The highly efficient toughening of PLA by UFPR is mainly ascribed to the strong interfacial interaction between PLA and UFPR and good dispersion of UFPR particles in PLA matrix. Our work provides an effective toughening method to largely improve the mechanical properties of PLA without sacrificing its stiffness, which is very important for the wide application of PLA materials.     

HL-2M 真空室保温层设计及安装

基于 HL-2M 真空室烘烤保温要求，通过有限元分析和原型件实验确定采用陶瓷纤维与纳米级微孔材 料组合作为 HL-2M 真空室保温材料。在 30℃时，保温层的导热系数小于 0.027W⋅m⁻¹·℃⁻¹；300℃时，导热系数 小于 0.038W⋅m⁻¹·℃⁻¹。在保温层厚度 25mm、热面温度 300℃且达到稳态时，冷面可控制在 85℃以下，线圈侧的 温度低于 60℃，整体热损失小于 12kW，满足 HL-2M 真空室烘烤需求。      

Resolving quantum dots and peptide assembly and disassembly using bending capillary electrophoresis

Despite the numerous techniques developed for the studying nanoparticle and peptide interaction nowadays, sensitive and convenient assay in the process of flow, especially to simulate the self‐assembly of quantum dots (QDs) and peptide inflow in blood vessels, still remains big challenges. Here, we report a novel assay for studying the self‐assembly of QDs and peptide, based on CE using a bending capillary. We demonstrate that the semicircles numbers of the bending capillary affect the self‐assembly kinetics of CdSe/ZnS QDs and ATTO‐D₃LVPRGSGP₉G₂H₆ peptide. Moreover, benefitting from this novel assay, the effect of the position on the self‐assembly has also been realized. More importantly, we also demonstrate that this novel assay can be used for studying the stability of the QDs–peptide complex inflow. We believe that our novel assay proposed in this work could be further used as a general strategy for the studying nanoparticle–biomolecule interaction or biomolecule–biomolecule interaction.     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.     

First-principles study of the co-effect of carbon doping and oxygen vacancies in ZnO photocatalyst

Although tuning band structure of optoelectronic semiconductor-based materials by means of doping single defect is an important approach for potential photocatalysis application,C-doping or oxygen vacancy(Vo)as a single defect in ZnO still has limitations for photocatalytic activity.Meanwhile,the influence of co-existence of various defects in ZnO still lacks sufficient studies.Therefore,we investigate the photocatalytic properties of ZnOx C0.0625(x=0.9375,0.875,0.8125),confirming that the co-effect of various defects has a greater enhancement for photocatalytic activity driven by visible-light than the single defect in ZnO.To clarify the underlying mechanism of co-existence of various defects in ZnO,we perform systematically the electronic properties calculations using density functional theory.It is found that the coeffect of C-doping and Vo in ZnO can achieve a more controllable band gap than doping solely in ZnO.Moreover,the impact of the effective masses of ZnO_xC_0.0625(x=0.9375,0.875,0.8125)is also taken into account.In comparison with heavy Vo concentrations,the light Vo concentration(x=0.875)as the optimal component together with C-doping in ZnO,can significantly improve the visible-light absorption and benefit photocatalytic activity.     

Implications on cosmic ray injection and propagation parameters from Voyager/ACE/AMS-02 nucleus data

We study the propagation and injection models of cosmic rays using the latest measurements of the boron-to-carbon ratio and fluxes of protons, helium, carbon, and oxygen nuclei by the Alpha Magnetic Spectrometer and the Advanced Composition Explorer at top of the Earth, and the Voyager spacecraft outside the heliosphere. The Advanced Composition Explorer(ACE) data during the same time interval of the AMS-02 data are extracted to minimize the complexity of the solar modulation effect. We find that the cosmic ray nucleus data favor a modified version of the diffusion-reacceleration scenario of the propagation. The diffusion coefficient is, however, required to increase moderately with decreasing rigidity at low energies, which has interesting implications on the particle and plasma interaction in the Milky Way. We further find that the low rigidity( a few GV) injection spectra are different for different compositions. The injection spectra are softer for lighter nuclei. These results are expected to be helpful in understanding the acceleration process of cosmic rays.     

Correlation analysis of cone calorimetry and microscale combustion calorimetry experiments

Flammability studies are conducted to evaluate the behavior of materials exposed to fire. In this study, microscale combustion calorimetry (MCC) and cone calorimetry methods were applied to acquire the flammability characteristics of red and grey extruded polystyrene (XPS) samples. To understand the effect of changes between parameters, Pearson’s correlation coefficient was used to examine their linear relationships. From the research, moderate and weak correlations were recorded between the total heat release rates from both methods for red and grey XPS, respectively. Plotting peak heat release rate against heat release temperature for MCC and ignition temperature for cone test showed that 25, 35 and 50 kW m^?2 incident heat fluxes of the cone test fall within 0.2 K s^?1 and 0.5 K s^?1 heating rates of MCC. Also, all the MCC parameters except char yield and total heat release presented good correlations with the cone calorimetry flammability characteristics. Hence, MCC could be used in conjunction with cone calorimetry to accurately and reliably assess the flammability of materials.

     

基于现代学徒制的中高职财经类专业课程体系衔接研究

现阶段,现代学徒制改革试点架起了中高职衔接的立交桥,而课程体系衔接是中高职衔接的实质与核心问题。财经类专业课程体系构建的典型方法主要是"岗位工作流程式",通过人才培养目标和课程衔接一体化构建,构建与"能力递进、工学交替"人才培养模式相适应的课程体系,推进中高职衔接,培养高素质高技能人才。