Insight into shear‐induced modification for improving processability of polymers: Effect of shear rate on the evolution of entanglement state

Many experimental results have revealed that the re‐entanglement kinetics of disentangled polymers is much slower than that predicted by tube theory. This retarded recovery of fully entangled state is of practical significance that shear‐induced modification may offer a way to improve processability for a polymer by reducing viscosity. This work tried to figure out the shear‐rate dependence variation of viscosity in the view of evolution of entanglement state through disentanglement and re‐entanglement, aiming to provide fundamental insights into application prospect of shear‐induced modification in preparing “in‐pellet” disentangled polymers prior to final processing. High‐density polyethylene was sheared on a parallel‐plate rotational rheometer with a linearly increased shear rate. Results showed that higher shear rate could induce further disentanglement, resulting in a lower viscosity with a reduction rate up to 93.7%, larger molecular weight between entanglements M_e , and longer re‐entanglement time. Additionally, less entanglement would give a larger lamellar thickness of sheared samples after nonisothermal crystallization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 598–606     

A Polyoxometalate-Based Binder-Free Capacitive Deionization Electrode for Highly Efficient Sea Water Desalination

Capacitive deionization is a promising technique in sea water desalination. Compared with common electrodes, mixed capacitive-deionization electrodes exhibit better performance in sea water desalination because they integrate pseudocapacitance and electric double-layer capacitance in one system. Herein, a 3D binder-free mixed capacitive-deionization electrode was fabricated by direct electrodeposition of SiW₁₂O₄₀⁴⁻ and polyaniline on a 3D exfoliated graphite carrier. In this electrode, SiW₁₂O₄₀⁴⁻/polyaniline composite particles with a size of about 100–120 nm are dispersed homogenously on the 3D exfoliated graphite carrier. Its specific capacitance reaches 352 F g⁻¹ at 1 A g⁻¹. With increasing current from 1 to 20 A g⁻¹, the specific capacitance only decays by 32 %. When employed in sea water desalination, the performance of this mixed capacitive-deionization electrode is also excellent. At 1.2 V, the salt adsorption capacity of this mixed electrode reaches 23.1 mg g⁻¹ with a salt adsorption rate of 1.38 mg g⁻¹ min⁻¹ in 500 mg L⁻¹ NaCl. The performance of this electrode is well retained after 30 cycles. The excellent sea water desalination performance originates from the synergistic effect between SiW₁₂O₄₀⁴⁻ and polyaniline. This work has developed polyoxometalate as a new material for capacitive-deionization electrodes.     

Metal‐Free Reaction of ortho‐Carbonylated Alkynyl‐Substituted Arylaldehydes with Common Amines: Selective Access to Functionalized Isoindolinone and Indenamine Derivatives

Herein we describe a reaction of ortho‐carbonylated alkynyl‐substituted arylaldehydes with common primary amines that can provide functionalized isoindolinone and 3‐hydroxylindenamine products in high yields. Depending on the substituent size of primary amines, two distinct reaction pathways were exploited selectively, that are, an initial aza‐conjugate addition followed by hydrogen transfer to access isoindolinone framework and a unique oxa‐conjugate addition followed by Petasis–Ferrier rearrangement to afford indenamine derivatives. In the presence of Et₃N, the reaction property of small primary amines was changed, proceeding to afford 3‐hydroxylindenamine derivatives efficiently. These products contain interesting substructures that exist in many natural products and bioactive molecules. The reaction features contain the use of transition‐metal‐free catalysts, simple operation, broad substrate scope, and product diversity.     

热模拟平面应变条件下的热轧织构研究

以微合金钢为材料,采用光学显微镜和EBSD,研究热模拟平面应变实验条件下再结晶奥氏体和变形奥氏体的织构演变.研究发现,在热模拟平面应变实验的压缩过程中,试样的两个自由端限制了变形区金属的宽向流动,达到了很好的平面应变状态.对于再结晶奥氏体相变工艺,由于相变前奥氏体发生再结晶,无畸变保留,奥氏体分解为仿晶界铁素体、贝氏体和少量的珠光体,织构为{100}011α;对于变形奥氏体相变工艺,未再结晶区的变形促进了铁素体相变,使奥氏体分解为铁素体和珠光体组织,织构为{332}113α和{113}110α.此两种工艺条件下的织构,皆为平面应变条件下的奥氏体相变织构,即热模拟平面应变实验可以达到很好的平面应变状态,可用于研究热轧过程的织构演变.     

Sulfur and Nitrogen Codoped Carbon Tubes as Bifunctional Metal‐Free Electrocatalysts for Oxygen Reduction and Hydrogen Evolution in Acidic Media

Invited for the cover of this issue is the group of Qiang Wu and Zheng Hu at Nanjing University. The image depicts sulfur and nitrogen codoped carbon tubes as bifunctional metal‐free electrocatalysts for oxygen reduction and hydrogen evolution in acidic media. Read the full text of the article at 10.1002/chem.201601535 .     

密度检定液配制及注意事项

根据密度计的工作和检定原理,介绍各种密度检定液的配制方法及注意事项。针对硫酸氢乙酯检定液难以配制问题,着重介绍了检定液的配制过程,通过对不同浓度酒精液配制的硫酸氢乙酯校准密度计的比较实验,说明了不同体积分数酒精液配制的硫酸氢乙酯对校准结果的影响。     

Bronsted acid-mediated reactions of aldehydes with 2-vinylaniline and biphenyl-2-amine

Herein we report simple Bronsted acid-mediated reactions of aldehydes with 2-vinylaniline and biphenyl-2-amine. Ultimately, the useful nitrogen-containing heterocycle derivatives are obtained. The electronic properties of the substituents on the aldehydes and 2-vinylaniline were investigated. It was found that molecules with both electron-donating and -withdrawing substituents were perfectly suitable substrates for this transformation, and the expected products were obtained in moderate to excellent yields.     

Synthesis and antitumor and antibacterial evaluation of fluoroquinolone derivatives(Ⅲ):Mono- and bis-Schiff-bases

To further explore an efficient modified route for the shift from an antibacterial fluoroquinolone to an antitumor one,mono-Schiff bases 6a-6h related to ciprofloxacin C3 carbonylhydrazone and bis-Schiff bases 4a-4h corresponding to C3/C7 carbonylhydrazone/hydrazone attached on a skeleton of ciprofloquinolone were designed and synthesized,and their in vitro antitumor activity against CHO,HL60,L1210 cells and antibacterial activity against Staphylococcus aureus and Escherichia coli were also reported.     

聚变实验堆真空室壳体成型残余应力分析

为了了解聚变实验堆真空室壳体表面残余应力的分布以及退火工艺对残余应力的影响，通过模拟分析和实验检测两种方式对不锈钢316LN冷压曲面和热压曲面残余应力进行研究，获得退火前后曲面表面残余应力的大小，得到冷压曲面和热压曲面残余应力的分布以及退火工艺对残余应力分布的影响。研究结果为分析成型工艺提供数据支撑，对中国聚变工程实验堆真空室的研究与制造具有重要意义。