Effects of preparation conditions of Au/FeO_x /Al_2O_3 catalysts prepared by a modified two-step method on the stability for CO oxidation

Composite oxide FeO x /Al 2 O 3 -supported gold catalysts were prepared by a modified two-step method. The effects of preparation conditions on the initial catalytic activity and long-time stability were studied for CO oxidation. XRD, XPS and in situ FTIR were employed to investigate the state of FeO x and the species on the catalyst surface. The results showed that Au/FeO x /Al 2 O 3 catalysts prepared by this method exhibited high activity and high stability in a wide pH value range. Calcination pretreatm...     

Magnetic solid-phase extraction using magnetic hypercrosslinked polymer for rapid determination of illegal drugs in urine

A novel magnetic material Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB) was prepared via the hypercrosslinking of its precursor which was produced via precipitation polymerization of methacrylic acid (MAA), vinylbenzyl chloride (VBC), and divinylbenzene (DVB) in the presence of Fe₃O₄/SiO₂ submicrospheres with the surface containing abundant reactive double bonds. The resultant sorbent was characterized by scan electron microscopy, N₂ adsorption, and Fourier transform infrared spectroscopy. It was found that this material had remarkable features such as large surface area (500 m²/g) and pore volume (0.32 cm³/g), as well as desirable chemical composition (including hydrophobic and ion‐exchange moieties). Taking advantages of the Fe₃O₄/SiO₂/P(MAA‐co‐VBC‐co‐DVB), a magnetic SPE (MSPE) coupled with capillary electrophoresis (CE) method was developed for the determination of illegal drugs in urine samples. The extraction time could be clearly shortened up to 3 min. The recoveries of these drug compounds were in the range of 84.0–123% with relative standard deviations ranging between 1.7 and 10.5%; the limit of detection was in the range of 4.0–6.0 μg/L. The proposed method is simple, effective, and low‐cost, and provides an accurate and sensitive detection platform for abused drug analysis.     

One-pot synthesis of Cu1.94S-CdS and Cu1.94S-Zn(x)Cd(1-x)S nanodisk heterostructures

Nanodisk heterostructures consisting of monoclinic Cu(1.94)S and wurtzite CdS have been colloidally synthesized for the first time. Initially, hexagonal-shaped nanodisks of Cu(1.94)S were produced upon thermolysis of a copper complex in a solvent mixture of HDA and TOA at 250 °C. Rapid addition of Cd precursor to the reaction mixture resulted in the partial conversion of Cu(1.94)S into CdS, yielding Cu(1.94)S-CdS nanoheterostructures. The original morphology of the Cu(1.94)S nanodisks was conserved during the transformation. When Zn precursor was added together with the Cd precursor, Cu(1.94)S-Zn(x)Cd(1-x)S nanodisks were generated. These two-component nanostructures are potentially useful in the fabrication of heterojunction solar cells.     

One-, two- and three-photon spectroscopy of π-conjugated dendrimers: cooperative enhancement and coherent domains

We use wavelength tunable femtosecond pulses to measure intrinsic (simultaneous) two-photon absorption (2PA) and three-photon absorption (3PA) molecular cross section in two series of π-conjugated dendrimers built of identical 4,4′-bis(diphenylamino) stilbene (BDPAS) and 4,4′-bis(diphenylamino) distyrylbenzene (BDPADSB) repeat units. Record large 2PA cross sections, σ₂=10⁻⁴⁶ cm⁴ s are obtained for the largest second-generation BDPAS-based dendrimer, as well as zeroth-generation 4-arm BDPADSB-based dendrimer. In both series, maximum 2PA cross section increases nonlinearly with the number of π-electrons, whereas for higher generations this dependence turns to linear one. 3PA cross section also increases nonlinearly with the size of the system in the series of BDPAS-based molecules, amounting a record large value, σ₃=10⁻⁷⁹ cm⁶ s², for the largest, second-generation dendrimer. We interpret these results in terms of direct inter-branch conjugation, which facilitates cooperative enhancement of the nonlinear-optical response. We propose a simple model which allows us to determine the effective size of coherent domains (extent of conjugation), which, in turn, determines the optimum dendrimer size for most efficient nonlinear response.     

循环流化床锅炉的出力分析及对策

通过对YG-75／5．4-M21循环流化床锅炉投产后出现的灭火、局部结焦、床温偏差、负荷率低等问题进行的分析，针对锅炉在运行方式、设备雄护、设备状况等方面存在的缺陷和不足，提出了合理的解决办法和建议。     

Development of cube textured Ni–5 at.%W alloy substrates for coated conductor application using a melting process

Biaxially textured Ni–5 at.%W substrates have been prepared by cold rolling, followed by three different annealing routes. In this paper, the processes of melting Ni and W metals, flat rolling, various annealing methods are described in detail. The Ni–5 at.%W tapes annealed under either high vacuum or flowing Ar (7% H₂) gas were characterized by X-ray pole figures, ODF, EBSD as well as AFM analysis. The texture analysis indicated that as fabricated tapes have a sharp cube texture formed after annealing at a wide temperature range of 800–1100 °C. The high quality of cube orientation on tapes was obtained after a two-step annealing (TSA), where the percentage of the cube texture component was as high as 93.5% within a misorientation angle smaller than 8° from EBSD analysis. Furthermore, it was also observed that the number of twin boundaries in this tape decreased with respect to that of tapes annealed both in vacuum and one-step gas annealing. From AFM on 1 μm² areas, it was concluded that the roughness (RMS) on the tape surface reached 0.98 nm.     

空气分离生产过程强制阀工序测控系统

论述了空气分离生产过程中强制阀工序测控系统的控制要求和软、硬件设计，并介绍了本系统在抗干扰方面的一些举措。     

在半适应多孔网状网络系统中解除死锁的多址发送机制

描述在多孔网状网络上解除多址发送中死锁问题的一种方法，这种方法将多址发送的目标组织成一棵分配树，树的分枝由一些消息链接而成，这些消息能够按照半适应回转路由选择策略沿着不会造成死锁的路线传送。