Distinct Stepwise Reduction of a Nickel?Nickel‐Bonded Compound Containing an α‐Diimine Ligand: From Perpendicular to Coaxial Structures

A nickel? nickel‐bonded complex, [{Ni(μ‐L^.?)}₂] ( 1 ; L=[(2,6‐iPr₂C₆H₃)NC(Me)]₂), was synthesized from reduction of the LNiBr₂ precursor by sodium metal. Further controllable reduction of 1 with 1.0, 2.0 and 3.0 equiv of Na, respectively, afforded the singly, doubly, and triply reduced compounds [Na(DME)₃] ? [{Ni(μ‐L^.?)}₂] ( 2 ; DME=1,2‐dimethoxyethane), [Na(Et₂O)]Na[(L^.?)Ni? NiL^2?] ( 3 ), and [Na(Et₂O)]₂Na[L^2?Ni? NiL^2?] ( 4 ). Here L represents the neutral ligand, L^.? denotes its radical monoanion, and L^2? is the dianion. All of the four compounds feature a short Ni? Ni bond from 2.2957(6) to 2.4649(8) Å. Interestingly, they display two different structures: the perpendicular ( 1 and 2 ) and the coaxial ( 3 and 4 ) structure, in which the metal? metal bond axis is perpendicular to or collinear with the axes of the α‐diimine ligands, respectively. The electronic structures, Ni? Ni bonding nature, and energetic comparisons of the two structure types were investigated by DFT computations.     

Heterocyclic 1,3,4-oxadiazole as columnar core

The synthesis, characterization and mesomorphic properties of a new type of liquid crystalline compound, the 2,5-bis(3,4,5-trialkoxyphenyl)-1,3,4-oxadiazoles, 3a-3h, are reported. These heterocyclic compounds are derived from unsaturated 1,3,4-oxadiazole as the core group, and obtained by the condensation reaction of 3,4,5-trialkoxybenzoic acid N-(3,4,5-trialkoxybenzoyl)-hydrazides and phosphorus oxychloride in toluene under reflux. All compounds were characterized by ¹H and ¹³C NMR spectroscopy, and elemental analysis. The mesomorphic properties of these and the related compounds 1, 2 were characterized and studied by differential scanning calorimetry and polarizing optical microscopy. The formation of columnar mesophases was found to be dependent on the numbers of alkoxy sidechains. The compounds 3 exhibited hexagonal columnar (Col_h) phases, however compounds 1, 2 formed crystalline phases. Compounds 3b-3e with shorter carbon chains were room temperature liquid crystals. Polar induction by nitrogen and/or oxygen atoms on the heterocyclic core ring might be responsible for the formation and better observed mesomorphic properties in this type of compound.     

Solid-Liquid Phase Transfer Catalytic Method for the Preparation of Acyclic and Cylic and Cyclic Ketene Acetals

Solid-liquid phase transfer catalytic elimination reaction for the preparation of acyclic and cyclic ketene acetals has been developed.     

Preliminary study on aerosol particle addition calibration method for on-line quantitative analysis of airborne radioactive particles with ICP-MS

An ambient aerosol concentration enrichment system coupled with ICP-MS for real-time monitoring of airborne radioactive particles is now under development. ICP-MS is very sensitive to sample introduction conditions, so it is necessary to develop an easy-use calibration method for on-line quantitative analysis in field application. In this paper, a calibration method using standard solution instead of monodisperse particles was established and validated preliminarily. First of all, four parameters for the method were determined experimentally, including: uptake flow rate and nebulisation efficiency of the Microconcentric nebuliser, nebulisation/transport efficiency of Aridus Desolvating Sample Introduction System, and Relative Sensitivity Factor between ¹⁵⁹?Tb and ¹⁷⁴?Yb. Then, monodisperse terbium nitrate particles were generated by a commercial Vibrating Orifice Aerosol Generator. Continuous aerosols of ytterbium nitrate droplets were nebulised from standard solution. They were mixed together, desolvated through the membrane dryer and introduced into ICP-MS for on-line analysis of terbium nitrate particles. The air sampled from nuclear environment was also introduced into ICP-MS to investigate the effect of flow rate on instrument responses. Finally, atom numbers of ¹⁵⁹?Tb in discrete terbium nitrate particles were determined using the calibration method and compared to the calculated value. Results show that when air flow rate increase from 10?mL?min^?1 to 100?mL?min^?1, the ratio of ¹⁵⁹?Tb ion count to ¹⁷⁴?Yb ion intensity keeps constant although instrument sensitivity decreases by a factor of 25. The relative standard deviation of ¹⁵⁹?Tb atom number measured is better than 18%. The discrepancy with the calculated value could be attributed to the over-estimation of atom number in the particles generated by VOAG because there was some liquid leakage in the VOAG.     

Decarbopalladation of pi-allylpalladium intermediates formed from palladium-catalyzed arylations of 3-allen-1-ols

[reaction: see text] Unusual palladium-catalyzed arylative fragmentations of acyclic 3-allen-1-ols were observed. Oxidative addition of Pd(0) to aryl halides would form the arylpalladium halides, which added to the central carbon of allenes via carbopalladation to form the pi-allylpalladium intermediates. The pi-allylpalladium intermediates would be reductively eliminated via carbon-carbon cleavage to give the arylated dienes and the alpha-hydroxyalkylpalladium intermediates, which were further reductively eliminated to the corresponding aldehydes.     

褐藻酸铜配合物膜催化VAc自由基聚合

以褐藻酸钠膜浸渍在15%CuCl2*2H2O水溶液中48 h的方法,于室温制备了疏水性的褐藻酸铜(Ⅱ)配位聚合物膜,并通过ESR、 UV-Vis、 IR、 XPS和电导率等手段,研究此配位催化剂褐藻酸铜(Ⅱ)配位聚合物膜表面的组成、配位结构和性质,得知1个Cu2+ 是以dsp2杂化空轨道与褐藻酸2个链节单元的2个羧羟基氧及其2个脱质子带负电荷氧的孤对电子发生配位作用,形成低自旋构型的褐藻酸铜(Ⅱ)配位聚合物,中心Cu2+ 的配位数为4,这对于低分子配合物而言,其空间构型一般是正方形,但在褐藻酸铜(Ⅱ)配位聚合物中,由于褐藻酸分子链的缠绕和卷曲,使上述的空间构型被扭曲,甚至有些配位体没有到位,导致该配位聚合物的中心Cu2+ 存在一些空位中心而具有配位催化活性,因此,HSO3-能按配位催化机理产生初级自由基氢,使醋酸乙烯酯(VAc)按自由基加聚反应历程进行聚合,这有别于CuCl2-Na2SO3-H2O氧化还原引发聚合体系。测定VAc在本体系和室温、pH=7条件下聚合的诱导期为90 s,反应时间24 h。聚醋酸乙烯酯(PVAc)得率82%, mw=1.02×106, mn=2.27×105, mw/mn=4.49。     

Luminescence-detected phase transitions in lanthanide-containing liquid crystals

Complexes between lanthanide nitrates and a pro-mesogenic 18-membered diaza-substituted coronand are luminescent both as powders and liquid crystals (between 87 and 195 degrees C), and the phase transitions are detected by monitoring luminescence intensity and lifetime.     

Self-assembly between silver(I) and di- and tri-2-pyridines with flexible spacer: formation of discrete metallocycle versus coordination polymer

The self-assembly of metallosupramolecules from reactions of flexible 2-pyridyl ligands and silver salts is described. When 1,3-bis(2-pyridyl)propane (L1), tris[(2-pyridyl)methyl]methane (L2), and 1,3-bis(2-pyridyl)-2-tolylpropane (L3) are used in combination with silver ions, novel discrete metallocyclic complexes are formed in crystals. Moreover, the self-assembly of 1,3-bis(2-pyridyl)-2-phenylpropane (L4) with silver nitrate yields a coordination polymer. The examination of its solution shows that this coordination polymer is formed via the solution-based discrete metallocyclic species.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

Self-assemblies of new rigid angular ligands and metal centers toward the rational construction and modification of novel coordination polymer networks

Self-assemblies of rigid angular ligands with 120 degrees molecular angle and metal centers have been investigated with the aim of achieving the rational construction and modification of coordination polymer structures. The reactions of Co(NCS)(2) with 1,3-bis(trans-4-styrylpyridyl)benzene (L(1)()), 2,6-bis(trans-4-styrylpyridyl)pyridine (L(2)()), 1,3-bis(trans-4-styrylpyrimidyl)benzene (L(3)()), and 1,3-bis(trans-4-styrylquinoly)benzene (L(4)()) afford complexes [Co(L(1)())(2)(NCS)(2)]( infinity ) (1), [Co(L(2)())(2)(NCS)(2)]( infinity ) (2), Co(L(3)())(2)(NCS)(2)(CH(3)OH)(2) (3), and [Co(L(4)())(NCS)(2)]( infinity ) (4), respectively. The resulting complexes exhibit open framework, stairlike hydrogen-bonded chain and single-stranded helical coil structures, which are controlled by the variation of the geometry around the coordination site in ligands. Moreover, the coordination of L(1)() and L(2)() to Mn(hfac)(2) (hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate) yields single-stranded helical coordination polymers of [Mn(L(1)())(hfac)(2)]( infinity ) (5) and [Mn(L(2)())(hfac)(2)]( infinity ) (6), respectively.