Artificial neural network method for determining optical properties from double-integrating-spheres measurements

<正>Accurate measurement of the optical properties of biological tissue is very important for optical diagnosis and therapeutics.An artificial neural network(ANN)-based inverse reconstruction method is introduced to determine the optical properties of turbid media,which is based on the reflectance(R) and transmittance (T) of a thin sample measured by a double-integrating-spheres system.The accuracy and robustness of the method has been validated,and the results show that the root mean square errors(RMSEs) of the absorption coefficientμ_a and scattering coefficientμ'_s reconstruction are less than 0.01 cm~(-1) and 0.02 cm~(-1),respectively.The algorithm is not only very accurate in the case of a lower albedo(~0.33),but also very robust to the noise of R and T especially for theμ'_s reconstruction.     

Effects of annealing on luminescence efficiency of large-size YAG:Ce crystal grown by temperature gradient techniques

<正>YAG:Ce crystal with a diameter of 110 mm is successfully grown by the temperature gradient technique (TGT).The effects of annealing on the luminescence efficiency of YAG:Ce crystal are investigated,and the optimal annealing temperature and atmosphere are obtained.The mechanism of variation behavior of the luminescence efficiency of YAG:Ce under different annealing conditions is discussed and some details on the luminescence associated with color centers are analyzed.     

Beam collimation for CSNS/RCS

The current design of the CSNS/RCS beam collimation system consists of a two-stage betatron collimation and a single momentum collimator. This paper summarizes various aspects of collimator design, including collimation principle and layout, material choice and collimator mechanical structure, etc. At last, radiation and thermal analysis are carried out to illustrate the feasibility of the current beam collimation scheme.     

利用近红外光谱检测多层组织血氧饱和度的研究

利用近红外光谱无创检测生物组织血氧饱和状态,是一种极富研究和应用前景的检测技术,在临床检测中被广泛应用.但常规临床检测应用于指端仅反映局部血氧饱和度信息,在使用中具有局限性,信号的可信度也存在质疑.该文提出了一种采用反射式脉搏血氧饱和度检测技术检测生物多层组织氧合状况的新方法,该方法通过调节入射光强以适应解剖学中生物组织多层结构的检测.应用该方法针对手指结构的实验结果表明,随着入射光强的改变,反映血氧饱和状态的光电脉搏波信号有显著变化.结合手指解剖学分析表明,光电脉搏波信号的变化与手指的多层面组织结构相对应,反映不同层面血氧饱和状态.这一特点表明,通过此法可以针对生物组织的多层结构进行测量.     

钛钒铁间吸收增强效应研究及其校正

利用X射线荧光分析方法,采用电制冷Sic(PIN)探测器,对配制的Ti-V,Ti-Fe,V-Fe三种伪二元体系样品进行测量,得到了元素计数率归一系数(RK)与含最(WK)之间的关系曲线,对各组元素间的吸收-增强效应程度进行了定性分析.结果表明,Ti-V二元系中所表现的吸收增强效应较明显,Ti-Fe,V-Fe两种二元系中吸收增强现象不明显.同时,采用指数拟合的数学校正方法,对RK-WK关系曲线进行了拟合,从而获得元素X射线荧光计数率与含垦的函数方程.利用三组Ti-V二元系样品对此方法进行检验,与实际结果相比,对Ti,V元素的相对分析误差均在0.2%以内.     

不同前驱体溶液制备BiFeO3薄膜的晶体结构及电学性质研究

BiFeO3 是技术上广泛应用的极为重要的一类多铁性材料.本文采用sol-gel法,在ITO基底上分别采用乙酸和硝酸为溶剂制备纯相BiFeO3薄膜.XRD、电滞回线与介电性分析表明,在退火温度为600℃时,两种溶液均能制备出BiFeO3晶体,相比之下,利用乙酸制备BiFeO3比较容易,且铁电性好.     

T型量子点结构中的自旋极化输运过程

我们利用单杂质Anderson模型及运动方程等理论,通过求解格林函数的方法研究了通过T型量子点结构(耦合于铁磁电极和介观环量子点结构)的自旋极化输运过程.研究结果表明,与量子点相耦合的铁磁电极中的极化强度是控制量子点电子输运的重要参数,由此可以达到自旋阀效应.另外我们还发现与量子点相耦合的介观环中的磁通会影响电子自旋向上和自旋向下近藤共振峰的分裂程度,但若加入适当的外磁场,那么这样的分裂将被抵消。     

The study of energy bands in nucleus ~(102)Zr

Theoretical calculations of the energy bands in nucleus 102 Zr are carried out by taking the projected shell model approach, which has reproduced the experimental data. In addition, by analyzing band-head energies, corresponding configurations of yrast band, quasi-particle rotational bands and side bands, we have worked out the microscopic formation mechanism of axially symmetric deformation bands: The low-excitation deformation bands are attributed to the high-j intruder states 1g 7/2 and 1h 11/2 in the N=...     

Noether-type theorem for discrete nonconservative dynamical systems with nonregular lattices

We investigate Noether symmetries and conservation laws of the discrete nonconserved systems with nonregular lattices. The operators of discrete transformation and discrete differentiation to the right and left are introduced for the systems. Based on the invariance of discrete Hamilton action on nonregular lattices of the systems with the nonconserved forces under the infinitesimal transformations with respect to the time and generalized coordinates, we give the discrete analog of generalized variational f...     

A full resolution autostereoscopic 3D display based on polarizer parallax barrier

A full resolution autostereoscopic three-dimensional （3D） display prototype is developed. It is composed of a time division thin film transistor liquid crystal display panel with an optical controlled birefringence liquid crystal polarization switch and a polarizer parallax barrier. Fast driving circuits operating at 120-Hz frame rate are fabricated. The 3D images on the display have the same resolution as the corresponding two-dimensional images, which is significantly different from conventional parallax barrier autostereoscopic 3D displays having degraded 3D image resolution.