三峡库区兴山县平邑口滑坡稳定性及其工程治理研究

利用极限平衡方法,针对各种不同的库水位运行工况,对平邑口滑坡治理前后的稳定性进行了分析计算,对比分析计算结果说明了工程采用压脚回填处治措施是合理有效的.     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.     

关于随机微分系统的M_0—稳定性

本文的目的是将确定性常微系统的M_0—稳定性概念与结果,推广到一般随机微分系统.然后,利用这些结果来研究随机受扰确定性系统M_0—稳定性的条件;借助未受扰确定性系统的Lynpunov一型函数及比较方法,得到了随机受扰系统M_0—几乎必然一致渐近稳定性与M_0—p阶矩一致渐近稳定性的充分条件.     

食管癌患者硒营养状况的评价

以机体硒水平，ＧＳＨ－Ｐｘ，ＳＯＤ的活性，相关的抗癌致癌元素的综合效应比值，食管癌死亡率与硒等元素的多元回归分析及ＭＤＡ的含量等合指标，评价食管癌患者的硒营养状况，结果表明，食管癌患者的营养状况差，表现为：硒水平低、含硒酶ＧＳＧ－Ｐｘ以及抗氧自由基的ＳＯＤ活性差，脂质过氧化加剧；ＭＤＡ含量高将使核酸，蛋白质含等含氨基活性物质产生交联反应而使细胞失活，食管癌患者硒营养状况差，与癌肿的一定相关关系，是     

矩阵方程（A^TXA，B^TXB=（C，D）的反对称解及其最佳逼近

本利用矩阵对的标准相关分解，得到了矩阵方程(A^TXB，B^TXB)=(C，D)反对称解存在的充分必要条件及通解表达式，同时给出了解关于已知矩阵的最佳逼近．     

A rapid and accurate 3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide colorimetric assay for quantification of bacteriocins with nisin as an example

The objective of this study is to propose a more accurate and faster MTT [3-(4,5-dimethyl thiazol-2-yl)-2,5-diphenyl tetrazolium bromide] colorimetric assay (MCA) for quantitative measurement of polypeptide bacteriocins in solutions with nisin as an example. After an initial incubation of nisin and indicator bacterium Micrococcus luteus NCIB 8166 in tubes, MTT was added for another incubation period. After that, nisin was quantified by estimating the number of viable bacteria based on measuring the amount of purple formazan produced by cleavage of yellow tetrazolium salt MTT. Then MCA was compared to a standard agar diffusion assay (ADA). The results suggested a high correlation coefficient (r ²=0.975±0.004) between optical density (OD) and the inhibitory effect of nisin on a bacterial strain Micrococcus luteus NCIB 8166 at a range of 0.125~32 IU/ml. The MCA described in this study was very quick. Quantification of nisin took only 7~8 h and the detection limit was at the level of 0.125 IU/ml when compared to 12 IU/ml and 24~28 h for ADA. The MCA provides an accurate and rapid method for quantification of nisin in solutions and is expected to be used for quantification of other antimicrobial substances.     

X波段五腔渡越管振荡器的理论与实验研究

 提出了一种新结构的X波段五腔渡越管振荡器，进行了理论和实验研究。根据场分布进行了一维非线性分析，结果表明该结构可以产生高功率微波，并判断了工作模式，为TM₀₁模的3π/5模。采用粒子模拟验证了一维非线性分析的结论，并优化设计出五腔渡越管振荡器,优化结果为：输出功率约1 GW， 工作频率9.3 GHz，束波转换效率约22%。实验中，通过参数调节，得到频率约9.25 GHz，峰值功率约780 MW，脉宽（半高宽）21 ns的输出微波，束波转换效率约为16%。实验结果与模拟结果基本符合。     

内源全息术的原理和数学描述

以往的全息术在对原子成像时,在相干光源、探测器空间分辨和信号强度三个方面遇到了难以克服的困难. 阐述了内源全息术克服这些困难的原理,研究了内源全息术的记录和再现全过程,推导出内源球面全息图的再现公式,并在散射因子球对称近似和能量无关近似下,推导出以δ函数表示原子全息再现像的解析表达式. 关键词： 内源全息术 同步辐射 晶体结构 傅里叶变换     

基于Karhunen-Loève变换和小波谱特征矢量量化的三维谱像数据压缩

提出了基于Karhunen Lo埁ｖｅ变换的小波谱特征矢量量化三维谱像数据压缩方法耍幔颍瑁酰睿澹?Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化方法应用了Karhunen Lo埁ｖｅ变换的消除谱相关性优良性能 ,应用二维小波变换消除空间相关性 ,在小波变换域内应用二维集分割嵌入块编码和一维谱特征矢量量化对三维谱像数据压缩 ,获得较高的压缩性能。实验结果表明 :Karhunen Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化编码比Karhunen Lo埁ｖｅ变换 /小波变换 /改进对块零树编码和Karhunen Lo埁ｖｅ变换 /小波变换 /快速矢量量化编码方法在同样压缩比条件下 ,峰值信噪比提高 2dB和 1dB以上 ,而速度提高了 1.5和 8倍 ,整体压缩性能有较大的提高