在J2EE架构中数据对象的设计与实现

从数据流角度出发,基于MVC模式设计要求,对数据对象在不同层之间的传输和转换问题进行了深入分析,设计出基于对象化数据在不同层之间的实现思路,基于网络传输和跨平台性考虑,提出了VO和XAO的解决方案,并采用了COMMAND模式进行设计实现。     

Numerical Study on the Coagulation and Breakage of Nanoparticles in the Two-Phase Flow around Cylinders

The Reynolds averaged N-S equation and dynamic equation for nanoparticles are numerically solved in the two-phase flow around cylinders, and the distributions of the concentration M₀ and geometric mean diameter d_g of particles are given. Some of the results are validated by comparing with previous results. The effects of particle coagulation and breakage and the initial particle concentration m₀₀ and size d₀ on the particle distribution are analyzed. The results show that for the flow around a single cylinder, M₀ is reduced along the flow direction. Placing a cylinder in a uniform flow will promote particle breakage. For the flow around multiple cylinders, the values of M₀ behind the cylinders oscillate along the spanwise direction, and the wake region in the flow direction is shorter than that for the flow around a single cylinder. For the initial monodisperse particles, the values of d_g increase along the flow direction and the effect of particle coagulation is larger than that of particle breakage. The values of d_g fluctuate along the spanwise direction; the closer to the cylinders, the more frequent the fluctuations of d_g values. For the initial polydisperse particles with d₀ = 98 nm and geometric standard deviation σ = 1.65, the variations of d_g values along the flow and spanwise directions show the same trend as for the initial monodisperse particles, although the differences are that the values of d_g are almost the same for the cases with and without considering particle breakage, while the distribution of d_g along the spanwise direction is flatter in the case with initial polydisperse particles.     

活性碳纳米管的制备及其在有机电解液中的电容性能研究

以KOH为活化剂对碳纳米管进行化学活化制备双电层电容器用高比表面积活性碳纳米管. 采用TEM和N₂吸附法表征活性碳纳米管的结构, 采用恒流充放电、循环伏安、交流阻抗等评价其在1 mol•L^－1 Et₄NBF₄/PC中的电容性能. 随活化剂用量增大、活化温度升高和活化时间的延长, 活性碳纳米管的比表面积和比电容都呈增大的趋势. 活化剂用量为3∶1, 800 ℃活化4 h制备的活性碳纳米管的比表面积663 m²•g^－1, 比活化前提高了3倍, 其比电容达57.2 F• g^－1, 比活化前提高了2倍. 将活性碳纳米管的比电容与其比表面积相关联, 发现两者之间具有非常好的线性关系, 并分析了原因.     

Vapor-phase synthesis of V-butylaniline from aniline and 1-butanol over Cu/SiO2 catalyst

The Cu/SiO2 catalyst prepared by incipient wetness method exhibited very high activity and selectivity for the vapor-phase synthesis of JV-butylaniline from aniline and 1-butanol. When Cu loading was 0.70 mmol/g-SiO2 and the catalyst precursor was calcined at 500 ℃, 1-butanol conversion reached 99%, and the selectivity of JV-butylaniline exceeded 97%.     

Assembly of ferrocenylhexanethiol functionalized gold nanoparticles for ascorbic acid determination

Gold nanoparticles functionalized with self-assembled films of ferrocenylhexanethiol and mercaptoundecanoic acid (MUA) were used for the determination of ascorbic acid (AA). The modified nanoparticles (mNPs) were prepared by a combination of the modified Schifrin’s and the place-exchange methods. Well-organized films were obtained due to electrostatic attraction between the carboxy groups of MUA and cationic surface of poly(diallyldimethylammonium chloride). The mNP films are highly stable and can be exploited to fabricate an enzyme-less sensor for AA whose function is based on the highly electrocatalytic activity of ferrocene in the mNPs towards AA. The sensor was characterized by cyclic voltammetry and chronoamperometry. Under optimal conditions, the response current towards AA is proportional to its concentration in the range from 8.0 μM to 6.0 mM, with a detection limit of 0.14 μM (at a signal-to-noise ratio of 3). This work represents a simple controlled test-bed for fundamental studies on the use of self-assembled mNPs for sensor applications.     

Heat capacity and thermodynamic properties of 1-hexadecanol

Three different nitrocellulose (NC) samples produced from linters were investigated. DSC studies on the NC+sym-diethyldiphenylurea (C1) mixtures were carried out. The influence of storage time on their pore structures was examined using thermoporometry. The results led to conclusion that large pores are multiples of small ones. The parameter n was used to characterize the number of C1 molecules equivalent to NC ring. Its value for short storage time was about 9 but for longer time reached the value of 3. The influence of thermal history on the phase transition and porosity of the different nitrocellulose samples was different.     

共轭二烯烃定向加成研究进展

以1,3-丁二烯为代表的共轭二烯烃是重要的有机合成原料,在有机合成领域有重要的应用价值.综述了以1,3-丁二烯等为代表的共轭二烯烃定向加成的研究进展,并展望了其发展和应用前景.     

Statistics of polymer capture by a nanopore: A Brownian dynamics simulation study

We investigate the statistics of polymer capture by a nanopore using Brownian dynamics simulations. It is found that when the velocity flux is greater than a critical velocity flux, the capture picture is a random selection process, otherwise it tends to a statistical process governed by energetic considerations. In addition, the chain ends capture probability decreases as the chain length increases and satisfies a power-law scaling of P0(N)~N-0.8.     

Potassium bromide catalyzed NS bond formation via oxidative dehydrogenation

N-Substituted benzo[d]isothiazol-3(2H)-ones are a family of compounds with extremely important application. Recently, we have developed a new green pathway to synthesize these compounds via potassium bromide-catalyzed intramolecular oxidative dehydrogenative cyclization. This reaction has high functional group tolerance and affords excellent yield even in gram scale.     

Practical way for the synthesis of 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides by phosphonylation of in situ generated o-quinone methides

Phosphonylation of the pretreated 2-(hydroxymethyl)phenol derivatives with acetic anhydride using trialkylphosphites as the nucleophilic reagents was reported, providing a practical way to the synthesis of novel highly steric 3,3′-bis-substituted benzo[d][1,2]oxaphosphole 2-oxides.