A Kind of Electrode Enhanced the Electrochemiluminescence

Electrochemiluminescence (ECL), like other chemiluminescence technique, offers high signal-to-noise ratio. Furthermore, it has the advantage over other chemiluminescence techniques of being initiated by a voltage potential. Thus, it provides a better-controlled luminescence. This technique has been used in measuring many kinds of organic and inorganic matters, and analyzing many kinds of antigen, antibody and hapten, such as carcinoembryonic antigen and alpha-fetoprotein, etc1-6. The ele…     

A Novel Cardiac Glycoside from Parepigynum funingesis

From the dried aerial part ofParepigynumfuningesis Tsiang et P. T. Li (Apocynaceae),a new cardiac glucoside, named parefuningoside (1) had been isolated. Its structure was determined by means of hydrolysis and spectral analysis.     

Banach空间中具Carathěodory条件常微分方程的Galerkin逼近

本文得到Banach空间中右端具Carathěodory条件常微分方程的Galerkin逼近,解的存在性,以及相应两方程解之间的关系。     

Analysis of far-infrared laser magnetic resonance spectra of CH2Br at 447.3 and 671.1μm

A simple model has been developed to describe the Zeeman patterns of far-infrared laser magnetic resonance spectra of the monobromomethyl radical CH₂Br observed at 447.3 and 671.1μm. A satisfactory agreement between the experimental spectra of the radical and their simulation with this simple model has been achieved. This approach can be used to gain further information about the structure and the spectrum of this interesting radical.     

大尺寸YBa2Cu3O7—δ超导体的研制

利用固相反应法成功地制备了直径为100mm,厚为5mm的大尺寸YBa_2Cu_3O_(7-δ)超导体。在通氧,930℃热处理45min后,超导体的上限转变温度为94K,零电阻温度为92K。x射线衍射进行物相定性,扫描电镜进行形貌和超导电性关系的对比观察。选区电子衍射给出YBa_2Cu_3O_(7-δ)超导体的晶格参数为a=0.348nm,b=0.377nm,c=0.716nm,属于正交晶系。     

1,3—二(正辛基亚磺酰)丙烷的合成及其反相纸层析的R_f图谱

本文合成了1,3—二(正辛基亚磺酰)丙烷(DOSP),完成了1,3—二(正辛基亚磺酰)丙烷的四氢萘饱和溶液的反相纸层析的R_f图谱。     

汽车拖拉机转向机构的优化设计

本文提出用一种新的时间离散化方法对汽车拖拉机的转向机构进行优化设计．该离散化方法是按被实现函数变化率的大小划分时间单元，在被实现函数变化率较大的区域，分点较密；在率化率较小的区域，分点较稀．笔者还分别用等间距的时间离散化及切比雪夫时间离散化方法，对同一机构使用同一种优化方法进行了优化设计，并将三种计算结果进行了比较．结果表明，笔者提出的方法，没有增加计算工作量，而能提高计算精度．     

Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

Polar oscillation and dispersion properties of quasi-confined optical phonon modes in a wurtzite GaN/AlxGa1−xN nanowire

Under the dielectric continuum model and Loudon’s uniaxial crystal model, the properties of the quasi-confined (QC) optical phonon dispersions and the electron-QC phonons coupling functions in a cylindrical wurtzite nanowire are deduced via the method of electrostatic potential expanding. Numerical computations on a GaN/Al_0.15Ga_0.85N wurtzite nanowire are performed. Results reveal that, for a definite axial wave number k_z and a certain azimuthal quantum number m, there are infinite branches of QC modes. The frequencies of these QC modes fall into two regions, i.e. a high frequency region and a low frequency region. The dispersion of the QC modes are quite apparant only when k_z and m are small. The lower-order QC modes in the higher frequency region play more important role in the electron-QC phonon interactions. Moreover, for the higher-order QC modes in the high frequency region, the electrostatic potentials “escaping” out of the well-layer material nearly could be ignored.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.