Ruthenium-based Conjugated Polymer and Metal-organic Framework Nanocomposites for Glucose Sensing

Many studies have focused on effective ways to exploit enzyme immobilization on an electrode surface to help improve the performance of enzymatic electrochemical biosensors. Herein, a novel glucose sensor was fabricated by immobilizing glucose oxidase (GOx) onruthenium-based conjugated polymer (CP) and metal-organic framework (MOF) nanocomposites. This has not only reduced the applied potential to 0.2 V (vs. Ag/AgCl), but also improved the effective surface area for enzyme immobilization.PPG@Ru@UiO-66-NH₂ was tailored by controlled chemical synthesis from a pre-synthesized water-soluble conjugated polymer (poly(N-phenylglycine)) and metal-organic framework (UiO-66-NH₂). The resulting nanocomposites were characterized using Fourier transform infrared spectroscopy, X-ray fluorescence, scanning electron microscopy, and cyclic voltammetry. The PPG@Ru@UiO-66-NH₂/GOx coated electrodedisplayed a linear measurementrange for glucose from 1 mM to 10 mM, with a sensitivity of 45.92 μA ⋅ mM⁻¹cm⁻¹ and limit of detection of5 μM( ). Furthermore, the practical application of the fabricatedglucosesensor was tested in simulative blood samples with satisfactoryaccuracy. This approach alsoopens a new door for applications regarding both enzymatic electrochemical biosensors and enzymatic biofuel cells (EBFCs).     

Simultaneous Determination of Triptolide and Tripdiolide in Extract of Tripterygium wilfordii Hook. f. by LC–APCI-MS

A novel method using liquid chromatography coupled with atmospheric pressure chemical ionization mass spectrometry in the negative selected ion monitoring mode has been developed and validated for rapid simultaneous determination of triptolide and tripdiolide in the extract of Tripterygium wilfordii Hook. f. The molecular ions m/z [M–H]⁻ 359 and 375 were selected for the quantification in selected ion monitoring mode for triptolide and tripdiolide. Standard calibration curve was linear over the concentration range of 0.12–24 and 0.15–30 μg mL⁻¹ for triptolide and tripdiolide. The relative standard deviations of intra- and inter-day were in the range of 4.7–9.9 and 8.9–12.6%. The average recoveries were between 96.4 and 104.6%. The limits of quantitation were 2.0 × 10⁻³ and 2.5 × 10⁻³ μg mL⁻¹ for triptolide and tripdiolide.     

末端碳链长度对偶氮苯自组装膜结构的影响

The end-group dominated molecular orientation in the azobenzene self-assembled monolayers (SAMs), CnAzoC2SH (n=1-4), on gold was evaluated for the first time by grazing incidence reflection absorption FTIR spectroscopy (RA-FTIR). All these azobenzene SAMs have highly-organized and closely-parked structures, with the molecule tilting away gradually from surface normal direction with the increase of end group alkyl length.     

PEMFC催化剂的研究：自制抗CO中毒Pt-Ru/C电催化剂的性质

用胶体法制备了抗CO中毒PEMFC阳极Pt-Ru/C电催化剂（标记为THYT－2）,对 比研究了THYT－2与Johnson Matthey (JM)公司同类品牌Pt-Ru/C催化剂的电化学及 其它物理化学性能。结果表明,THYT－2电催化剂在甲醇燃料电池和CO／H_2（Φ_ (CO) = 1 * 10~(-4)）的氢氧燃料电池中的电催化行为与JM催化剂相当,但THYT－ 2在低浓度CO氢气燃料中的电池性能更好。两种催化剂的其它物理化学性质具有类 似性：XPS分析结果表明THYT－2和JM催化剂 中都有三种不同价态的Pt存在：即金 属态Pt(0)、氧化态Pt(II)和Pt(IV)。HRTEM测试结果表明两种催化剂的粒径处在2 ～3 mn左右,这可能是它们拥有良好电化学性能的主要原因之一。本文还对催化剂 中Pt与Ru组分的分布和相互作用进行了讨论,提出了改进Pt-Ru/C电催化剂的思路 。     

The Efficient Synthesis of the Optically Active β‐Hydroxyl‐γ‐Butyrolactone Derivatives

The optically active β‐hydroxyl‐γ‐butyrolactones were synthesized from nonchiral starting material by employing reductive cleavage reaction, sharpless asymmetric epoxidation and dihydroxylation, and Lewis acid‐catalysed cyclization as key steps. This strategy can be used to prepare many chiral β‐hydroxyl‐γ‐butyrolactone analogues.     

Electroorganic synthesis using a fluoride ion mediator under ultrasonic irradiation: synthesis of oxindole and 3-oxotetrahydroisoquinoline derivatives

[reaction: see text] Anodic intramolecular cyclization of alpha-(phenylthio)acetamides using a fluoride ion mediator was realized. Under ultrasonic irradiation, cyclization was accelerated markedly to give desired cyclized products in moderate to good yields. The local heating effect of ultrasonic irradiation seems to be more advantageous than usual heating.     

Calix[2]furano[2]pyrrole and related compounds as the neutral carrier in silver ion-selective electrode

The performance of calix[2]furano[2]pyrrole and related compounds used as neutral carriers for silver selective polymeric membrane electrode was investigated. The silver ion-selective electrode based on calix[2]furano[2]pyrroles gave a good Nernstian response of 57.1 mV per decade for silver ion in the activity range 1×10⁻⁶ to 1×10⁻² M. The present silver ion-selective electrode displayed very good selectivity for Ag⁺ ion against alkali and alkaline earth metal ions, NH₄⁺, and H⁺. In particular, the present Ag⁺-selective electrode exhibited very low responses towards Hg²⁺ and Pb²⁺ ions. The potentiometric selectivity coefficients of the silver ion-selective electrode exhibited a strong dependence on the solution pH. In particular, the response of the electrode to the Hg²⁺ activity was greatly diminished at pH 2.5 compared to that at pH 5.0. Overall, the performance of the present silver ion-selective electrode based on the ionophore, calix[2]furano[2]pyrrole, is very comparable to that of the electrode prepared with the commercially available neutral carrier in terms of slope, linear range, and detection limits.     

Characterization of highly sulfated cyclodextrins

A class of highly sulfated cyclodextrins (HS-CDs) was developed for enantiomeric separation of chiral compounds by capillary electrophoresis (CE). The HS-CDs were produced by a facile single-step direct sulfation of cyclodextrin using sulfur trioxide-trimethylamine complex in dimethylformamide. Characterization of the HS-CDs by electrospray ionization mass spectrometry and by CE using a well-established indirect detection method indicated the species have very narrow heterogeneity in terms of degree of sulfation. Elemental analysis of the HS-alpha-, beta- and gamma-CDs showed that the average sulfate contents were 11, 12, and 13 per CD molecule, respectively. The 13C NMR of HS-CDs is consistent with the structural assignment of nearly complete sulfation at C-6 primary hydroxyl groups and partial sulfation at the C-2 secondary hydroxyls (>70%), while the C-3 hydroxyls remain unsubstituted. Enantiomeric separation by CE using the HS-CDs as chiral selectors showed that HS-alpha-, beta- and gamma-CDs complement each other by exhibiting different chiral selectivities, resulting in resolution of many chiral neutral, acidic and basic compounds of greatly varying structural features. The part of HS-CD that interacts with the guest molecule during complexation and, therefore, the receiving end of the cyclodextrin hydrophobic bucket was surrounded with largely regiospecifically substituted C-2 sulfates and intact C-3 hydroxyls, both at the equatorial positions. Such global regiospecific structural arrangement in HS-CDs provides differential diasteroisomeric complexation is proposed to be the principal contributing factor in the resolving racemates.     

Preparative SEC column packed with microporous particles prepared from cellulose

New microporous particles with large pore size (mean pore diameter of 820 nm) are successfully prepared from a mixture of cellulose and konjac glucomannan (RC-KGM3) in 1.5 M NaOH-0.65 M thiourea aqueous solution by coagulating with 5 weight percentage (wt%) CaCl(2), and then 2 wt% HCl aqueous solution. A preparative size-exclusion chromatographic (SEC) column packed with the gel particles is used for the fractionation of a dextran in water. The exclusion limit and fractionation range of the stationary phase are molecular masses of 125 yen 104 g/mol and 5.6 yen 104 to 125 yen 104 g/mol, respectively. The dextran [dextran 50, weight-average molecular mass (M(w)) = 40.1 yen 104 g/mol, polydispersity index (d) = 3.5] is fractionated by the preparative SEC column to obtain six fractions, and four of them are refractionated twice by the same preparative SEC column. The refractionated samples F-3-3 and F-4-3 are characterized by analytical SEC combined with laser light scattering and light scattering to obtain M(w) of 91.8 and 61.9 yen 104 g/mol, as well as d of 1.3 and 1.4, respectively. The results indicate that the fractions having narrow molecular mass distribution are satisfactorily prepared with the SEC column. The described SEC column can be successfully used to fractionate polymers in aqueous solution.     

Photo-oxidation of poly(vinyl chloride)

The photo-oxidation of PVC has been studied over the temperature range 30–150°C. Initiation with ultraviolet (2537A) radiation has been correlated with the presence of minute amounts of ozone. The contribution of atomic oxygen and singlet oxygen (¹Δ_g) molecules to the initiation mechanism is discussed. The β-chloroketones probably formed in the photo-oxidation of PVC, decomposed according to a Norrish type I reaction without loss of chlorine atoms. The gaseous products of the photo-oxidation of PVC at 30°C were carbon dioxide, carbon monoxide, hydrogen, and methane. Hydrogen chloride was obtained only when PVC was heated at high temperatures. When PVC was photo-oxidized and then heated at high temperature, benzene was obtained in addition to hydrogen chloride. The gaseous products from the photo-oxidations of model compounds, such as 4-chloro-2-butanone and 2,4-dichloropentane, were also compared with those from PVC. Hydrogen chloride was detected only after photo-oxidation at temperatures of 25°C or higher. Therefore, it was concluded that hydrogen chloride is mainly a product of thermal decomposition. Since unsaturation was not observed in photo-oxidized PVC films, the cause of discoloration is unclear. When PVC was modified by stabilizers or additives, the oxidative degradation was further complicated by side reactions with the additives.