加工硬质合金端铣刀刀槽时的工艺调整计算

硬质合金端铣刀刀体上的刀槽，通常将设计为槽底与铣刀轴线倾斜δ角，槽侧壁与铣刀轴线倾角为ω且偏移一个距离为ｅ，以使刀齿装夹在刀体上后获得端铣刀所需的几何角度。本文主要论述在万能铣床上铣削铣刀体上具有δ、ω、ｅ的刀槽时必要的工艺调整，利用矢量及座标转换推导了加工刀槽时必要的参数计算公式，为高效率、高质量地进行铣刀体刀槽的加工提供了一种精确可行的参数计算方法。     

多项选择题测验信度的一个估计方法及其应用

在多项选择题测验分数等于真实分数和猜测分数之和的假设模型下，本文得到了一个多项选择题测验信度的理论公式，并由此给出了测验信度的估计方法。最后，通过两个例子，说明了本文提出的方法在测验信度分析中的应用，并将这种方法与教育测量中常用的库德——理查逊方法（Ｋｕｄｅｒ－Ｒｉｃｈａｒｄｓｏｎ）进行了比较     

添加剂在氧化铈抛光中的作用机理的探索

本文在试验基础上,对添加剂在氧化铈抛光中作用机理—提高氧化铈抛光效率的机理和防止玻璃抛光表面腐蚀的机理作了探索,指出在一定的抛光工艺条件下,每一种添加剂对于一定品位的氧化铈和一定牌号的光学玻璃有一最佳的加入量。     

城市规划辅助审批系统中的相似度研究

城市规划的审批是一件难于量化的工作，它受政治经济等多方面因素影响，是城市规划领域关注的一大焦点．本文尝试将CBR技术用于城市规划辅助审批，让政府的审批依据达到历史与现实的统一．实现CBR的一个关键是相似度的设计，本文结合城市规划辅助审批领域的特点，设计了可行的方案，并应用于实际的办公系统中．     

低温电解渗硫及其应用研究

本文研究了１８ＣｒＭｎＴｉ钢渗碳＋低温电解渗硫工艺及硬质合金刀具低温电解渗硫工艺．考核了刀具的耐用度。试验结果表明．低温电解渗硫提高了切削刀具的使用寿命。     

水稻花粉悬浮培养及其在育种上的应用

评估了２０个水稻品种离体花粉悬浮培养产生愈伤组织和再分化植株的能力，并进行了花粉悬浮培养试验，结果表明；品种之间反应差异很大。来源于日本的“黎明”（粳稻）最敏感。“黎明”植株再分化的频率达８４．１％。在愈伤组织的形成和植株再分化过程中，除其它一些因子外，基因型的差异有一定制约作用。通过水稻花粉悬浮培养诱导出的新品系“Ｎ１０”，其特征有：早熟，穗大，株高（９０～１００ｃｍ），产量高和抗稻瘟病等。     

Synthesis of 5‐Radioiodoarabinosyl Uridine Analog for Probing the HSV‐1 Thymidine Kinase Gene

Tumor cells transduced with herpes simplex virus thymidine kinase gene have been intensively applied to the field of positron emission tomography via imaging of its substrate. As a pilot synthesis approach, a facile preparation of 5‐[¹²⁵I] iodoarabinosyl uridine starting from commercially available uridine is reported herein.     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

The role of binder mobility in spontaneous adhesive contact and implications for cell adhesion

The standard view of mechanical adhesive contact is as a competition between a reduction in free energy when surfaces with bonding potential come into contact and an increase in free energy due to elastic deformation that is required to make these surfaces conform. An equilibrium state is defined by an incremental balance between these effects, akin to the Griffith crack growth criterion. In the case of adhesion of biological cells, the molecules that tend to form surface-to-surface bonds are confined to the cell wall but they are mobile within the wall, adding a new phenomenon of direct relevance to adhesive contact. In this article, the process of adhesive contact of an initially curved elastic plate to a flat surface is studied for the case in which the binders that account for adhesion are able to migrate within the plate. This is done by including entropic free energy of the binder distribution in the total free energy of the system. By adopting a constitutive assumption that binders migrate at a speed proportional to the local gradient in chemical potential, the transient growth of an adhesion zone due to binder transport is analyzed. For the case of a plate of very large extent, the problem can be solved in closed form, whereas numerical methods are invoked for the case of a plate of limited extent. Results are presented on the rate of growth of an adhesion zone in terms of system parameters, on the evolution of the distribution of binders and, in the case of a plate of limited extent, on the long-term limiting size of the adhesion zone.     

Growth of single-crystal magnetite nanowires from Fe3O4 nanoparticles in a surfactant-free hydrothermal process

Single-crystal magnetite nanowires with average diameter of ca. 20 nm and length of up to several micrometers were prepared by a simple alkaline surfactant-free hydrothermal process. The crystallinity, purity, morphology, and structural features of the as-prepared magnetite nanowires were investigated by powder X-ray diffraction, transmission electron microscopy (TEM) and selected area electron diffraction. The composition and length of nanowires depends on the pH, with higher pH favoring longer nanowires composed entirely of Fe₃O₄. A mechanism for nanowire growth is proposed.