OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.     

与企业全方位深度融合建设精品专业

行业发展是专业建设的前提,与企业结合是专业建设的关键,与生产结合是专业建设的核心,与就业结合是专业建设的根本。航空制造业的快速发展需要大量的数控技术专业人才。数控技术专业的发展离不开与企业的良好合作。企业为专业建设注入活力,专业建设为企业发展提供保障。     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

Resistivity－temperature characteristics of sol gel YBa2Cu3Oy samples synthesized in flowing oxygen atmosphere

The relationship of resistivity versus synthesizing temperature of sol gel YBa_2Cu_3O_y samples was studied when prepared under flowing oxygen conditions. A set of high-temperature ρ－T curves was obtained for the whole process. After the sample finished the test measuring, its resistivity was ρ_{300}=9.83×10^{-3 }Ω·cm at room temperature. The ρ－T curve also showed that the orthorhombic－tetragonal phase transformation of sol-gel YBa_2Cu_3O_y sample occurred at 581℃ for the sample in the rising temperature process, but at 613℃ in the cooling process, lower than that of the samples made by using the conventional powder metallurgy methods.     

分形集K的不可测性

从自相似集合的性质出发,通过容度研究了一类分形集合K的分形特征:M inkowski不可测性.     

网络路由收敛性能测试研究

在网络建设和运行中,采用测试的方法对其性能进行评估对于网络的正常运营具有重要的意义.本文研究了网络路由收敛性能测试方法,为得到路由收敛性能指标,对OSPF和iBGP的路由收敛时间进行了测量.提出了一种简化的路由收敛时间测量方法,通过测量数据平面的传输性能指标,对路由控制平面的收敛时间进行估算.该方法对于测试设备要求不高,实施简单方便.采用该方法在CERNET2投入运营之前对其进行了路由性能测试,实验结果表明CERNET2在路由变化时具有较好的路由收敛性能.     

WEIGHTED APPROXIMATION ON SZASZ—TYPE OPERATORS

In this paper, we use weighted modules ω(?)(f,t)w to study the pointwise approximation on Szasz-type operators, and obtain the direct and converse theorem, as well as characterizations of the pointwise approximation of Jacobi-weighted Szasz-type operators.     

基于图书馆2．0环境下的馆员素质和技能要求探析

阐述了图书馆2．0的内涵，分别对一线馆员、咨询馆员、学科馆员应具备的服务素质和技能进行了探讨。     

Multi-layer thin films/substrate system subjected to non-uniform misfit strains

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such methodologies are further extended to multi-layer thin films deposited on a substrate in the present study. Each thin film may have its own non-uniform misfit strain. We derive relations between the stresses in each thin film and the change of system curvatures due to the deposition of each thin film. The interface shear stresses between the adjacent films and between the thin film and the substrate are also obtained from the system curvatures. This provides the basis for the experimental determination of thin film stresses in multi-layer thin films on a substrate.     

An Additive Problem with Primes in Arithmetic Progressions

In this paper, we extend a classical result of Hua to arithmetic progressions with large moduli. The result implies the Linnik Theorem on the least prime in an arithmetic progression.