Poly[[diaqua(N,N‐dimethylformamide‐κO)manganese(II)]‐μ3‐sulfato]

In the title complex, [Mn(SO₄)(C₃H₇NO)(H₂O)₂]_n, each Mn^II ion has a distorted octahedral geometry formed by three O atoms of three different sulfate groups, one O atom of a dimethylformamide ligand and two water molecules. The sulfate groups act as tridentate bridging ligands connecting the Mn^II ions into a two‐dimensional layer structure which can be regraded as a 4.8² network.     

Improved solvent-free microwave extraction of essential oil from dried Cuminum cyminum L. and Zanthoxylum bungeanum Maxim

Solvent-free microwave extraction (SFME) is a recently developed green technique which is performed in atmospheric conditions without adding any solvent or water. SFME has already been applied to extraction of essential oil from fresh plant materials or dried materials prior moistened. The essential oil is evaporated by the in situ water in the plant materials. In this paper, it was observed that an improved SFME, in which a kind of microwave absorption solid medium, such as carbonyl iron powders (CIP), was added and mixed with the sample, can be applied to extraction of essential oil from the dried plant materials without any pretreatment. Because the microwave absorption capacity of CIP is much better than that of water, the extraction time while using the improved SFME is no more than 30 min using a microwave power of 85 W. Compared to the conventional SFME, the advantages of improved SFME were to speed up the extraction rate and need no pretreatment. Improved SFME has been compared with conventional SFME, microwave-assisted hydrodistillation (MAHD) and conventional hydrodistillation (HD) for the extraction of essential oil from dried Cuminum cyminum L. and Zanthoxylum bungeanum Maxim. By using GC-MS system the compositions of essential oil extracted by applying four kinds of extraction methods were identified. There was no obvious difference in the quality of essential oils obtained by the four kinds of extraction methods.     

Novel Stereoselective Synthesis of (E)- α，β-Unsaturated Esters by the Tandem Reaction of Deprotonation-Oxidation-Wittig Reaction from Phosphonium and Arsonium Salt

Phosphonium or arsonium salt 1 can undergo the tandem reaction of deprotonation -oxidation-Wittig reaction with alcohol 2 in the presence of sodium hydroxide and manganese dioxide,which affords a general simplified method for the stereoselective synthesis of (E)- α-β-unsaturated esters 3.     

Development and validation of a high-performance liquid chromatography-electrospray ionization-mass spectrometry assay for the determination of zaleplon in human plasma

In this paper, a sensitive and rapid chromatographic procedure using a selective analytical detection method (electrospray ionization-mass spectrometry in selected-ion monitoring mode) in combination with a simple and efficient sample preparation step is first presented for the determination of zaleplon in human plasma. The separation of the analyte, internal standard, and possible endogenous compounds are accomplished on a phenomenex Luna 5-microm C8(2) column (250- x 4.6-mm i.d.) with methanol-water (75:25, v/v) as the mobile phase. In order to optimize the mass detection of zaleplon, several parameters such as ionization mode, fragmentor voltage, m/z ratios of ions monitored, type of organic modifier, and eluent additive in the mobile phase are discussed. An internal standard is selected to guarantee the quantitative accuracy. Each analysis takes less than 6 min. The calibration curve of zaleplon in the range of 0.1-60.0 ng/mL in plasma is linear with a correlation coefficient of > 0.9992, and the detection limit (s/n = 3) is 0.1 ng/mL. The within- and between-day variations (relative standard deviation) in the zaleplon plasma analysis are less than 2.4% (n = 15) and 4.7% (n = 15), respectively. The application of this method is demonstrated for the analysis of zeleplon plasma samples in a Phase-I human pharmacokinetic study.     

Synthesis,characterization, DNA-binding and DNA-photocleavage studies of [Ru(bpy)2(BPIP)] and [Ru(phen)2(BPIP)] (BPIP = 2-(4′-biphenyl)imidazo[4,5-f][1,10]phenanthroline)

New ligand 2-(4′-biphenyl)imidazo[4,5-f][1,10]phenanthroline (BPIP) and its complexes [Ru(bpy)₂(BPIP)]²⁺ (1) (bpy = 2,2′-bipyridine) and [Ru(phen)₂(BPIP)]²⁺ (2) (phen = 1,10-phenanthroline) have been synthesized and characterized by mass spectroscopy, ¹H NMR and cyclic voltammetry. The interaction of two Ru(II) complexes with calf thymus DNA (CT-DNA) was investigated by spectroscopic and viscosity measurements. Results indicate that both complexes bind to DNA via an intercalative mode and the DNA-binding affinity of complex 2 is much greater than that of complex 1. Furthermore, when irradiated at 365 nm, both complexes have also been found to promote the photocleavage of plasmid pBR 322 DNA.     

Syntheses,structures and luminescent properties of four copper(I) cyanide coordination polymers based on 2-(n-pyridyl)benzimidazole ligands (n = 2, 3, 4)

Four copper(I) cyanide coordination polymers containing 2-(n-pyridyl)benzimidazole ligands, namely [Cu₂(CN)(2-PyBIm)]_n (1), [Cu₂(CN)₂(3-PyHBIm)]_n (2), {[Cu₃(CN)₃(4-PyHBIm)₄] · 2H₂O}_n (3) and [Cu₅(CN)₃(4-PyBIm)₂]_n (4), have been synthesized and characterized by X-ray crystallography. Complex 1 is a one-dimension coordination polymer in which 2-(2-pyridyl)benzimidazole is deprotonated and adopts a bridging tridentate coordination mode. Complex 2 has ladder-like structure in which 2-(3-pyridyl)benzimidazole does not deprotonate and acts as a bidentate bridge. Complex 3 displays a saddle-shaped helical chain constructed through μ₂-cyanide group and the outstretched neutral 2-(4-pyridyl)benzimidazole monodentate ligand. Complex 4 shows two-dimension layer polymeric structure in which deprotonated 2-(4-pyridyl)benzimidazole acts as a tridentate bridging ligand. The cyanide groups in four complexes all act as bidentate bridging ligands. These complexes are thermal stable and display luminescence in the solid states.     

Cryo-SEM studies of latex/ceramic nanoparticle coating microstructure development

Cryogenic scanning electron microscopy (cryo-SEM) was used to investigate microstructure development of composite coatings prepared from dispersions of antimony-doped tin oxide (ATO) nanoparticles (approximately 30 nm) or indium tin oxide (ITO) nanoparticles (approximately 40 nm) and latex particles (polydisperse, D(v): approximately 300 nm). Cryo-SEM images of ATO/latex dispersions as-frozen show small clusters of ATO and individual latex particles homogeneously distribute in a frozen water matrix. In contrast, cryo-SEM images of ITO/latex dispersions as-frozen show ITO particles adsorb onto latex particle surfaces. Electrostatic repulsion between negatively charged ATO and negatively charged latex particles stabilizes the ATO/latex dispersion, whereas in ITO/latex dispersion, positively charged ITO particles are attracted onto surfaces of negatively charged latex particles. These results are consistent with calculations of interaction potentials from past research. Cryo-SEM images of frozen and fractured coatings reveal that both ceramic nanoparticles and latex become more concentrated as drying proceeds; larger latex particles consolidate with ceramic nanoparticles in the interstitial spaces. With more drying, compaction flattens the latex-latex particle contacts and shrinks the voids between them. Thus, ceramic nanoparticles are forced to pack closely in the interstitial spaces, forming an interconnected network. Finally, latex particles partially coalesce at their flattened contacts, thereby yielding a coherent coating. The research reveals how nanoparticles segregate and interconnect among latex particles during drying.     

Continuous flow microfluidic device for cell separation, cell lysis and DNA purification

A novel integrated microfluidic device that consisted of microfilter, micromixer, micropillar array, microweir, microchannel, microchamber, and porous matrix was developed to perform sample pre-treatment of whole blood. Cell separation, cell lysis and DNA purification were performed in this miniaturized device during a continuous flow process. Crossflow filtration was proposed to separate blood cells, which could successfully avoid clogging or jamming. After blood cells were lyzed in guanidine buffer, genomic DNA in white blood cells was released and adsorbed on porous matrix fabricated by anodizing silicon in HF/ethanol electrolyte. The flow process of solutions was simulated and optimized. The anodization process of porous matrix was also studied. Using the continuous flow procedure of cell separation, cell lysis and DNA adsorption, average 35.7 ng genomic DNA was purified on the integrated microfluidic device from 1 μL rat whole blood. Comparison with a commercial centrifuge method, the miniaturized device can extract comparable amounts of PCR-amplifiable DNA in 50 min. The greatest potential of this integrated miniaturized device was illustrated by pre-treating whole blood sample, where eventual integration of sample preparation, PCR, and separation on a single device could potentially enable complete detection in the fields of point-of-care genetic analysis, environmental testing, and biological warfare agent detection.     

Acetylation of beta-cyclodextrin surface-functionalized cellulose dialysis membranes with enhanced chiral separation

The enhanced enantiomeric separation of racemic phenylalanine solution has been demonstrated by the membrane-based chiral resolution method using an acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. Beta-cyclodextrin (CD) was first immobilized onto the surface of commercial cellulose dialysis membranes, followed by the acetylation reaction through the treatment of the membranes with acetic anhydride to form the chiral selective acetylated beta-cyclodextrin-immobilized cellulose dialysis membrane. The acetylated CD-immobilized membrane exhibits enantioselectivity in the range of 1.26-1.33 depending on the acetylation time. The improvement in enantioselectivity after acetylation was mainly attributed to the better discrimination ability of acetylated CD and the decrease in membrane pore size. Molecular modeling simulations indicate that the acetylation of hydroxyl groups would result in a CD conformation with torus distortions and would create higher steric hindrance for penetrants. As a result, compared to the original CD, the acetylated CD may have less effective binding but better discrimination of enantiomers. The energy drop is only 3 kcal/mol between different enantiomers before and after the binding of phenylalanine with an unmodified CD. The energy drop increases to 10 kcal/mol if acetylated CD is employed as the chiral selector, showing stronger characteristics for chiral selection.