直接测距型激光主动成像系统发展现状

对直接测距型激光主动成像系统进行了深入研究。按照工作方式分类介绍了国外相关研究机构激光主动成像系统的工作原理及系统参数, 归纳总结并比较分析了各工作方式的优缺点。分析认为:基于单点或小面阵探测器配合光机扫描方案可实现较远作用距离, 但其对激光器重频要求较高, 后续数据处理复杂, 且系统体积、功耗较大;而基于Flash探测器的激光主动成像系统易于实现小型化, 对激光器重频要求较低。作用距离受限问题可通过电子扫描得以有效解决。在具体应用时, 需根据实际需求, 综合考虑系统体积、质量、功耗、激光器输出峰值功率及脉冲重复频率、所能获取的探测器类型、后续数据处理能力等多种因素折衷选取。     

Effects of carbon contents on morphology and electrical properties of Li2MnSiO4/C prepared by a vacuum solid-state method

To improve the electrochemical performance of Li₂MnSiO₄ with low electric conductivity, the Li₂MnSiO₄/C composite are synthesized by a vacuum solid-state reaction of a mixture of SiO₂, LiCH₃COO, Mn(CH₃COO)₂ and designed mass of C₆H₁₂O₆ · H₂O as carbon sources. The crystalline structure and morphology of products are analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and laser scattering technology (LS) respectively. The tested results show that carbon doping decrease the crystallite sizes of products, but keep the aggregation of the particles and made the impurity increased instead. The results of constant current charge-discharge prove that the mixed carbon improve Li⁺ transmission performance and decrease inner polatization resistance of Li₂MnSiO₄ materials, but can not prevent the collapse of Li₂MnSiO₄ crystal structure. While the galvanostatic intermittent titration technique (GITT) results demonstrate that the primary reason for the improved electrochemical performance can be attributed to increased Li-ion diffusion coefficient $(D_{Li^ + } )$ as a result from carbon doping.     

TiO2/Fe2O3异质结薄膜的制备及其光电特性的研究

通过水热法成功在FTO上制得Ti O2/Fe2O3异质结薄膜,采用场发射扫描电子显微镜(FESEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱(UV-Vis)分析测试手段对样品的形貌和结构进行了表征。结果表明,Ti O2/Fe2O3异质结是由直径约200~300 nm的Ti O2纳米棒镶嵌着Fe2O3纳米颗粒组成。通过光电流测试,证明Ti O2/Fe2O3异质结的可见光光电转换效率相比Ti O2明显提高,并对Ti O2/Fe2O3异质结的光电转换机理进行了分析。     

Solvothermal Transformation of a Calcium Oleate Precursor into Large‐Sized Highly Ordered Arrays of Ultralong Hydroxyapatite Microtubes

Hydroxyapatite (HAP), a well‐known member of the calcium phosphate family, is the major inorganic component of bones and teeth in vertebrates. The highly ordered arrays of HAP structures are of great significance for hard tissue repair and for understanding the formation mechanisms of bones and teeth. However, the synthesis of highly ordered HAP structure arrays remains a great challenge. In this work, inspired by the ordered structure of tooth enamel, we have successfully synthesized three‐dimensional bulk materials with large sizes (millimeter scale) that are made of highly ordered arrays of ultralong HAP microtubes (HOAUHMs) by solvothermal transformation of calcium oleate precursor. The core–shell‐structured oblate sphere consists of a core that is composed of HAP nanorods and a shell that consists of highly ordered HAP microtube arrays. The prepared HOAUHMs are large: 6.0 mm in diameter and up to 1.4 mm in thickness. With increasing solvothermal reaction time, the HOAUHMs grow larger; the microtubes become more uniform and more ordered. This work provides a new synthetic method for synthesizing highly ordered arrays of uniform HAP ultralong microtubes that are promising for biomedical applications.     

Diastereoselective Synthesis of Functionalized Tetrahydropyrimidin‐2‐thiones via ZnCl2 Promoted One‐pot Reactions

In the presence of zinc chloride, the in situ generated β‐enamino ester from the reaction of morpholine, piperidine and pyrrolidine with methyl propiolate reacted, with aromatic aldehydes and thiourea in ethanol resulting in the functionalized tetrahydropyrimidin‐2‐thiones in satisfactory yields and with good diastereoselectivity. When aromatic aldehydes bearing electron‐withdrawing group were used in the reaction, the 4‐hydroxytetrahydropyrimidin‐2‐thione derivatives were obtained as the main product.     

Purification and Characterization of the Glucoside 3-Dehydrogenase Produced by a Newly Isolated Sphingobacterium faecium ZJF-D6 CCTCC M 2013251

A soluble glucoside 3-dehydrogenase (G3DH) was purified from a newly isolated Sphingobacterium faecium ZJF-D6 CCTCC M 2013251. The enzyme was purified to 35.71-fold with a yield of 41.91 % and was estimated by sodium dodecyl sulphate–polyacrylamide gel electrophoresis with a molecular mass of 62 kDa. The sequences of two peptides of the enzyme were all contained in a GMC family oxidoreductase (EFK55866) by mass spectrometry analysis. The optimal pH of the enzyme was around 6.2. The enzyme was stable within a pH range of 5.0–6.6 and was sensitive to heat. G3DH from S. faecium exhibited extremely broad substrate specificity and well regioselectivity to validoxylamine A. The enzyme was completely inhibited by Hg₂Cl₂ and partly inhibited by Cu²⁺, Fe²⁺, Ca²⁺, and Cd²⁺. The apparent K _m values for D-glucose, sucrose, and validoxylamine were calculated to be 1.1, 1.7, and 2.1 mM, respectively. With this purified enzyme, 3-keto sucrose was prepared at pH 5.0, 30 °C for 10 h with a yield of 28.7 %.     

Stereospecific 1,2-Migrations of Boronate Complexes Induced by Electrophiles

The stereospecific 1,2-migration of boronate complexes is one of the most representative reactions in boron chemistry. This process has been used extensively to develop powerful methods for asymmetric synthesis, with applications spanning from pharmaceuticals to natural products. Typically, 1,2-migration of boronate complexes is driven by displacement of an α-leaving group, oxidation of an α-boryl radical, or electrophilic activation of an alkenyl boronate complex. The aim of this article is to summarize the recent advances in the rapidly expanding field of electrophile-induced stereospecific 1,2-migration of groups from boron to sp² and sp³ carbon centers. It will be shown that three different conceptual approaches can be utilized to enable the 1,2-migration of boronate complexes: stereospecific Zweifel-type reactions, catalytic conjunctive coupling reactions, and transition metal-free sp²–sp³ couplings. A discussion of the reaction scope, mechanistic insights, and synthetic applications of the work described is also presented.     

Research on gamma-ray irradiation-assisted synthesis of cross-linked polystyrene via bulk polymerization

Journal of Radioanalytical and Nuclear Chemistry - Controlling heat accumulation is one of the major challenges for block materials synthesizing via bulk polymerization. In the paper, cross-linked...     

Switchable Polymerization Triggered by Fast and Quantitative Insertion of Carbon Monoxide into Cobalt–Oxygen Bonds

A strategy that uses carbon monoxide (CO) as a molecular trigger to switch the polymerization mechanism of a cobalt Salen complex [salen=(R,R)-N,N′-bis(3,5-di-tert-butylsalicylidene)-1,2-cyclohexanediamine] from ring-opening copolymerization (ROCOP) of epoxides/anhydrides to organometallic mediated controlled radical polymerization (OMRP) of acrylates is described. The key phenomenon is a rapid and quantitative insertion of CO into the Co−O bond, allowing for in situ transformation of the ROCOP active species (Salen)Co^III-OR into the OMRP photoinitiator (Salen)Co^III-CO₂R. The proposed mechanism, which involves CO coordination to (Salen)Co^III-OR and subsequent intramolecular rearrangement via migratory insertion has been rationalized by DFT calculations. Regulated by both CO and visible light, on-demand sequence control can be achieved for the one-pot synthesis of polyester-b-polyacrylate diblock copolymers (Đ<1.15).