Investigation on the Ring-Opening Reactions of 3-(1H-1,2,4-Triazol-1-yl)1,5-benzothiazepines with Arylonitrile Oxides

Abstract

Novel ring opening compounds, (Z)-2-((Z)-((E)-1,3-diaryl-2-(1H-1,2,4-triazol-1-yl)allylidene)amino)aryl N-hydroxybenzimidothioates 4a–r, were obtained from the reaction of 2,4-diaryl-3-(1H-1,2,4-triazol-1-yl)-2,5-dihydro-1,5-benzothiazepines 3a–f and arylonitrile oxides. The structure of these products has been elucidated by spectroscopic analysis and, in one case, X-ray crystallographic analysis. According to the result, it was presumed that this reaction did not proceeded through 1,3-dipolar cycloaddition reaction.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT      

改性可膨胀石墨的制备及在硬质聚氨酯泡沫中的阻燃性能

采用表面接枝硅烷偶联剂法将硼酸负载在可膨胀石墨(EG)表面制得了改性EG(MEG), 并考察了MEG在硬质聚氨酯泡沫(RPUF)中的阻燃性能. 利用扫描电子显微镜、 X射线光电子能谱、 傅里叶变换红外光谱、 膨胀试验及热失重分析对MEG进行了形貌、 元素组成及结构性能表征, 通过热失重分析、 极限氧指数(LOI)及锥形量热仪考察了RPUF/MEG的热稳定性及燃烧性能. 结果表明, 硼硅化合物作为硅硼陶瓷前驱体已负载在EG表面; MEG及RPUF/MEG体系膨胀炭层更为致密, 800 ℃时的残余量分别较EG和RPUF/EG提高了8.7%和3.7%; RPUF/MEG体系的LOI较RPUF/EG有所提高, 热释放速率峰值降低了10%, 产烟速率及CO生成速率均显著降低. RPUF/MEG阻燃性能的提高与MEG负载的硅硼陶瓷前驱体促进了阻燃RPUF各组分间的相互作用及增强了炭层的阻隔性有关.     

A New Phenylpropanoid Glycoside from Dragon's Blood of Dracaena cambodiana

A new phenylpropanoid glycoside, named cambodianin F(1), together with three known compounds, 1-O-β-D-glucopyranosyl-2-hydroxy-4-allylbenzene(2), 1-O-(6-O-α-L-rhamnopyranosyl-β-D-glucopyranosyl)-2-hydroxy-4-allylbenzene(3) and 1,2-di-O-β-D-glucopyranosyl-4-allylbenzene(4) was isolated from the dragon's blood of Dracaena cambodiana. The new compound was elucidated by HR-ESI-MS and spectroscopic techniques(UV, IR, 1D and 2D NMR).     

自由基修饰共轭微孔聚合物应用于5-羟甲基糠醛选择性氧化

采用有机单体侧链嫁接2,2,6,6-四甲基哌啶氧自由基（2,2,6,6-tetramethylpiperidineoxyl,TEMPO）的策略将TEMPO嫁接到2,5-二溴苯甲酸侧链,并与四（4-乙炔基苯）甲烷通过Sonogashira偶联反应,构筑TEMPO自由基功能化共轭微孔聚合物CMP-4-TEMPO.利用核磁共振谱（NMR）、扫描电子显微镜（SEM）、粉末X-射线衍射（XRD）红外吸收光谱（FT-IR）和电子顺磁共振谱（EPR）等技术研究了所合成单体及CMP形貌和结构.催化性能测试结果表明CMP-4-TEMPO可将5-羟甲基糠醛（5-HMF）高效、高选择性氧化成高附加值2,5-二甲酰基呋喃（2,5-DFF）.CMP-4-TEMPO催化剂循环利用10次仍保持较高的转化率.提出了CMP-4-TEMPO中形成TEMPO氧正离子是实现5-HMF转化为2,5-DEF的催化氧化机理.CMP-4-TEMPO有望成为各种醇高效、高选择性氧化以及可循环利用的异相催化剂.     

Product Identification and Mass Spectrometric Analysis of n-Butane and i-Butane Pyrolysis at Low Pressure

The pyrolysis of n-butane and i-butane at low pressure was investigated from 823-1823 K in an electrically heated flow reactor using synchrotron vacuum ultraviolet photoionization mass spectrometry. More than 20 species, especially several radicals and isomers, were detected and identified from the measurements of photoionization efficiency (PIE) spectra. Based on the mass spectrometric analysis, the characteristics of n-butane and i-butane pyrolysis were discussed, which provided experimental evidences for the discussion of decomposition pathways of butane isomers. It is concluded that the isomeric structures of n-butane and i-butane have strong influence on their main decomposition pathways, and lead to dramatic differences in their mass spectra and PIE spectra such as the different dominant products and isomeric structures of butene products. Furthermore, compared with n-butane, i-butane can produce strong signals of benzene at low temperature in its pyrolysis due to the enhanced formation of benzene precursors like propargyl and C4 species, which provides experimental clues to explain the higher sooting tendencies of iso-alkanes than n-alkanes.     

Formation and Characteristics of Acrylonitrile/Urea Inclusion Compound

The formation process and composition of the acrylonitrile/urea inclusion compounds (AN/UIC) with different aging times and AN/urea molar feed ratios are studied by differen-tial scanning calorimetry (DSC) and X-ray diffraction (XRD). It is suggested that DSC candetermine the guest/host ratio and the heat of decomposition. Meanwhile, the guest/host ratio and heat of decomposition are obtained, which are 1.17 and 5361.53 J/mol, respec-tively. It is suggested AN molecules included in urea canal lattice may be packed flat against each other. It is found that the formation of AN/UIC depends on the aging time. XRD results reveal that once AN molecules enter urea lattice, AN/UIC are formed, which possess the final structure. When AN molecules are sufficient, the length of AN molecular arrays in urea canals increases as aging time prolonging until urea tunnels are saturated by AN.     

Charge-transfer complex coupled between polymer and H-aggregate molecular crystals

Crystal needles of N,N′-bis(1-ethylpropyl)-3,4,9,10-perylenebis(dicarboximide) (EPPTC) are produced through p-stacking and are embedded in the thin film of poly(9,9-din-hexylfluorenyl-2,7-diyl) (PFO) when the blend solution of EPPTC and PFO in p-xylene is spin-coated onto a glass substrate. Charge transfer (CT) complex is resolved from the spectroscopic response of the blend film, which is generated only when the PFO molecules are excited. Thus, the PFO molecules are specified as donors and the H-aggregated EPPTC as acceptors in the formation of CT state (CTS). The emission resulting from the CTS in the red is further recognized by its much longer lifetime than both the intrinsic emission of the individual EPPTC molecules and that of their pure aggregates. Near-field analysis verifies that the CTS form on the boundary between the PFO and the crystal phases. The CT exciton forms by bounding the hole left on HOMO of the donor (PFO) and the indirectly transferred electron to the H-aggregate state of EPPTC, which transits back to the ground state by emitting a photon at about 650 nm. This introduces special physics in the heterojunctions that are coupled with the H-aggregates and mechanisms important for the design of organic photovoltaic devices. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

多级孔NiMo负载TS-1分子筛催化剂的制备及其加氢脱硫性能

钛硅(TS-1)分子筛的微孔孔道严重限制了其在复杂分子催化转化中的应用,为了克服这一问题,通过酸洗脱、碱刻蚀及二者相结合的方法制备了多级孔 TS-1 分子筛,并采用等体积共浸渍法制备了相应的 NiMo 负载型催化剂;使用 X 射线衍射(XRD)、N₂吸附-脱附、吡啶吸附红外光谱(Py-FTIR)、氢气程序升温还原(H₂-TPR)、X射线光电子能谱(XPS)和高分辨透射电子显微镜(HR-TEM)等方法对多级孔TS-1分子筛的理化性质进行了表征;以二苯并噻吩(DBT)为探针对催化剂的加氢脱硫(HDS)性能进行了评价。结果表明,和常规TS-1分子筛相比,多级孔TS-1分子筛保持了MFI拓扑结构,比表面积增大且具有介孔结构,分子筛表面形成了适量的Brønsted酸中心;相应催化剂上活性金属与载体间相互作用得以改善,MoS₂片晶长度和堆垛层数适宜,形成了更多的 NiMoS活性相;催化剂活性和选择性均有所提升,尤其是酸洗脱获得的 NiMo/AT-TS-1催化剂的活性相较未经处理的NiMo/TS-1催化剂提升了1.2倍,直接脱硫(DDS)路径选择性提升了22%。     

二氧化锆微球表面键合磺化交联聚苯乙烯固相萃取填料的制备及应用

以聚合诱导胶体凝聚法(PICA)制备二氧化锆微球,用钛酸酯偶联剂对其进行表面改性,使其接枝上碳碳双键基团。在溶液体系中,该双键与单体苯乙烯和二乙烯苯在自由基引发下交联聚合,形成的聚合物包覆在二氧化锆微球表面。再通过磺化方法将磺酸基离子连接到苯环上,得到阳离子交换固相萃取填料。通过红外光谱、扫描电镜/X射线能谱等手段对其进行了表征。将装填得到的固相萃取柱与高效液相色谱联用,测定了水中的甲基磺草酮、阿特拉津和乙草胺。3种化合物的色谱峰面积与质量浓度呈良好的线性关系,相关系数(r²)均大于0.99;甲基磺草酮、阿特拉津和乙草胺的检出限分别为5.41、6.72和13.4 μg/L。结果表明,制得的聚合物包覆二氧化锆微球的粒径为6~8 μm,用该填料制成的固相萃取小柱对3种目标物的吸附率高。