Melting behaviors,crystallization kinetics,and spherulitic morphologies of poly(butylene succinate) and its copolyester modified with rosin maleopimaric acid anhydride

This article investigated the melting behaviors, crystallization kinetics, and spherulitic morphologies of poly(butylene succinate) (PBS) and its copolyester (PBSR) modified with rosin maleopimaric acid anhydride, using wide‐angle X‐ray diffraction, differential scanning calorimeter (DSC), and polarized optical microscope. Subsequent DSC scans of isothermally crystallized PBS and PBSR exhibited two melting endotherms, respectively, which was due to the melt‐recrystallization process occurring during the DSC scans. The equilibrium melting point of PBSR (125.9 °C) was lower than that of PBS (139 °C). The commonly used Avrami equation was used to describe the isothermal crystallization kinetics. For nonisothermal crystallization studies, the model combining Avrami equation and Ozawa equation was employed. The result showed a consistent trend in the crystallization process. The crystallization rate was decreased, the perfection of crystals was decreased, the recrystallization was reduced, and the spherulitic morphologies were changed when the huge hydrogenated phenanthrene ring was added into the chain of PBS. The activation energy (ΔE) for the isothermal crystallization process determined by Arrhenius method was 255.9 kJ/mol for PBS and 345.7 kJ/mol for PBSR. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 900–913, 2006     

耦合拟不动点定理

根据耦合拟不动点和上半连续算子的定义，讨论了在一定连续条件下集值混合单调算子的耦合拟不动点存在性问题，证明了，若A是非空弱闭值上半连续增算子，则A存在不动点以及若A是非空弱闭值上半连续混合单调算子，则A存在偶合拟不动点等结论．     

纳米光纤与光孤子通信探讨

在普通光纤光孤子传输的行为基础上,提出纳米光纤概念,讨论利用纳米光纤的强三阶光学非线性建立的全新光孤子光通信系统 分析纳米光纤量子点的制备和纳米光纤的形成机制     

折衷范式下我国商业银行国际化分析

文章从国际生产的角度分析了银行业的国际化,并在邓宁的折衷范式下具体阐述了我国商业银行进行对外直接投资所具有的所有权优势、区位优势和内部化优势.认为我国的商业银行已具备了这三个方面较强的优势,随着我国经济的发展和非金融企业对外投资的增加,其对外直接投资规模会不断扩大,但政府也需为其营造一个有利的环境.     

有穷长半模偏序集上的一个定理

本文是对参考文献[1]第二章定理14证明的补充和改进。该定理乃指: 定理14.在任何上(或下)半模的有穷长的偏序集内,Jordan-Dedekind链条件成立。 文献[1]中,考虑上半模情形,谈到已知一个连接链:γ∶a=x_0相似文献   

Acetic anhydride as a synthetic reagent

Acetic anhydride has been used widely in synthetic organic chemistry, especially in syntheses and transformations of heterocyclic compounds. These utilities are reviewed under the following classification.     

Synthesis of pyrimido[4,5-e][1,4]oxazepin-5-ones

Eighteen novel pyrimido[4,5-e][1,4]oxazepin-5-ones were prepared directly via the reaction of either ethyl 4-chloro-2-phenyl-5-pyrimidinecarboxylate (Ia) or ethyl 4-chloro-2-m-chlorophenyl-5-pyrimidinecarboxylate (Ib) with a variety of substituted 2-(alkylamino)ethanols. A typical example was the preparation of 8,9-dihydro-9-methyl-2-phenylpyrimido[4,5-e][1,4]-oxazepin-5(7H)-one (IIa) from the reaction of Ia with 2-(methylamino)ethanol. Hydrolytic cleavage of the lactone ring in IIa with sodium hydroxide solution, followed by acidification with hydrochloric acid afforded 4-[(2-hydroxyethyl)methylamino]-2-phenyl-5-pyrimidinecarboxylic acid (IV). Reactions of IIa with concentrated ammonium hydroxide or hydrazine also caused cleavage of the lactone ring, giving the corresponding amide (V) or hydrazide (VI), respectively. Structural assignments were supported by infrared and nuclear magnetic resonance spectra.     

Synthesis of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepines

Syntheses of 5,6,8,9,14,14a-hexahydroisoquino[1,2-b][3]benzazepine-2,3,11,12-tetrol and related compounds are described. Key steps involve an initial construction of the isoquinoline ring under the Bischler-Napieralski conditions, which is followed by the building of the azepine ring via an intramolecular lactam formation on to the isoquinoline nucleus.     

Synthesis of 1,2,3,4,8,9,10,11-octahydro-[1,4] diazepino[6,5,4-jk ]earbazole and related compounds

1,2,3,4,8,9,10,11-Octahydro[1,4]diazepino[6,5,4-jk]earbazole (VIa) was synthesized from 2,3,4,5-tetrahydro-1H-benzodiazepine (la) via the route shown in Scheme 1. Other compounds which were prepared similarly are 3-acetyl-6-chloro-1,2,3,4,8,9,10,11-octahydro[1,4]diazepino-[6,5,4-jk]carbazole(Vb) and 3-methyl-1,2,3,4,8,9,10,11-octahydro[1,4]diazepino[6,5,4-jk]carb-azole (VIII). Chemical transformations which were carried out with VI and 3-acetyl-1,2,3,4,8,9, 10,11-octahydro[1,4]diazepino[6,5,4-jk]carbazole (Va) are also described.     

高层建筑外附雨篷的表面风压和气动力系数

采用风洞试验方法研究高层建筑外附雨篷的风压特征,分析风压系数、风压相关性、非高斯性和整体升力系数随风向角的变化,给出围护结构的设计风压,最后研究倾角和出挑长度对整体力系数的影响. 研究发现,高层建筑外附雨篷上表面风压系数在正迎风时最大值接近1.4,系气流受到后方高层建筑的阻挡下翻导致;上、下表面的最大整体压力系数出现正迎风情况,最大值分别为1.24和0.76;上、下表面的最大整体升力系数出现侧风面,最大值分别为1.13和1.01;上下叠加后测点风压的非高斯性比单表面增强;上表面和下表面的升力系数在0°~70°风向呈现高斯分布,在80°~180°风向呈现较强的非高斯分布;高层建筑外附雨篷上表面的极值正压大于下表面;雨篷整体升力系数按照倾角-10°、0°、10°依次递增.