温度和炭黑对天然橡胶影响的分子动力学模拟

天然橡胶（natural rubber,NR）是常用的耗能减震材料,但温度及填料对其有明显影响。为了更好的发挥天然橡胶的力学性能,采用分子动力学（MD）方法,研究了温度T与炭黑（CB）含量β对天然橡胶静动态性能的影响。结果表明,随着温度的升高,定伸应力逐渐降低,储能模量下降,损耗模量上升,体系特征由玻璃态转变为粘流态,这表明温度极大影响了链段的运动,从而影响力学性能。此外,炭黑与分子链存在吸附作用,能有效增强材料的定伸应力、储能模量和损耗模量,对玻璃化温度也有提升效果。但填充比例达到40%后补强效果减弱,这可能与炭黑比表面积下降有关。     

飞龙掌血水提物的扩血管作用及原理初探

飞龙掌血的水提物飞龙一号(F01)给小鼠腹腔注射,其 LD_(50)=3.70g/kg。F01(80mg/kg)对麻醉 S.D.大鼠有明显降血压作用,伴有心率加快。该作用无快速耐受性,且不被 H_1及 H_2组胺受体、M 胆碱受体及β肾上腺素受体之阻断剂取消。对于离体 S.D.大鼠尾动脉螺旋条,F01(0.3至3mg/ml)可使由 KCl(60mmol/L)、NE(0.1μmol/L)或 AVP(0.01μmol/L)刺激而收缩的组织明显舒张。KCI(80mmol/L)增加血管平滑肌组织对钙的撮取,这可以通过测定组织中未被镧置换的低亲和力同位素~(45)Ca 的含量来确定。F01(0.06至4mg/ml)可显著降低这种钙摄取的增加。上述结果表明,F01具有直接扩张血管作用,此种作用与抑制钙内流有关。     

ZrO2∶Tb3+纳米晶的离子交换法制备及其发光特性

以强碱性阴离子交换树脂为交换介质,采用离子交换法制备了稀土Tb3+离子掺杂的ZrO2:Tb3+纳米晶.通过XRD,TG-DSC,TEM,HRTEM等手段分析了样品制备过程的物相变化及晶粒形貌,用荧光光度计研究了样品的三维荧光光谱、激发光谱和发射光谱.结果表明:前驱沉淀物经800℃焙烧处理2 h,制备出近方型形貌,颗粒分散性好、尺寸约为40 nm的四方相ZrO2:Tb3+纳米晶.当焙烧温度升高到900℃以上时样品出现了少量单斜晶相,而经800℃焙烧处理的纯Zr02是以四方相和单斜相同时存在.说明稀土Tb3+离子的掺杂对ZrO2基质的四方晶相起到稳定作用.由ZrO2:Tb3+)的等角三维荧光光谱图显示Tb3+在ZrO2基质中的最佳激发波长为290 nm:在290 nm波长光的激发下观察到纳米ZrO2中Tb3+的发射峰位于491,545,582 nm分别对应于Tb3+的5D4→7F6、5D4→7F5、5D4→7F4、5D4→7F4能级跃迁,以491,545nm的发射峰最强,其中经800℃焙烧处理的样品其5D4→7F6跃迁发射与5D4→7F5跃迁发射强度几乎相同,说明该法制备的纳米ZrO2:Tb3+中5D4→7F6跃迁发射增强,使Tb3+发光的蓝色成分增加了.     

A false color image fusion method based on multi-resolution color transfer in normalization YCBCR space

In this paper, a false color image fusion method for merging visible and infrared images is proposed. Firstly, the source images and reference image are decomposed respectively by Laplacian pyramid transform. Then the grayscale fused image and the difference images between the normalized source images are assigned to construct YC_BC_R components. In the color transfer step, all the three channels of the color space in each decomposition level are processed with the statistic color mapping according to the color characteristics of the corresponding sub-images of the reference image. Color transfer is designed based on the multi-resolution scheme in order to significantly improve the detailed information of the final image, and to reduce excessive saturation phenomenon to have a comparatively natural color appearance compared with the classical global-coloring algorithm. Moreover, the differencing operation between the normalized source images not only provides inter-sensor contrast to make popping the potential targets but also weakens the influence of the ambient illumination variety to a certain degree. Finally, the fused results and several metrics for evaluation of fused images subjectively and objectively illustrate that the proposed color image fusion algorithm can yield a more complete mental representation of the perceived scene, resulting in better situational awareness.     

发光二极管用SrWO4:Eu3+红光荧光粉激发谱强度的调控

采用化学共沉淀法制备了Eu³⁺掺杂摩尔分数不同、煅烧温度不同的SrWO₄:Eu³⁺系列发光粉体, 所制备的粉体均具有Eu³⁺特征的强室温红光荧光发射. 通过调节煅烧温度和掺杂摩尔分数来调控近紫外和蓝光吸收强度, 进而调控用395 nm的近紫外光和465 nm的蓝光激发样品所得红光发光强度. 研究结果表明, 所制备的SrWO₄:Eu³⁺红光荧光粉可以被紫外和蓝光发光二极管有效激 关键词： 稀土掺杂 4:Eu³⁺')" href="#">SrWO₄:Eu³⁺ 光致发光 白光发光二极管     

Behavior of rodlike polyelectrolytes near an oppositely charged surface

The behavior of highly charged short rodlike polyelectrolytes near oppositely charged planar surfaces is investigated by means of Monte Carlo simulations. A detailed microstructural study, including monomer and fluid charge distributions and chain orientation, is provided. The influence of chain length, substrate's surface-charge density, and image forces is considered. Due to the lower chain entropy (compared to flexible chains), our simulation data show that rodlike polyelectrolytes can, in general, better adsorb than flexible ones do. Nonetheless, at low substrate-dielectric constant, it is found that repulsive image forces tend to significantly reduce this discrepancy.     

丝网印刷柔性电子器件

有机电子器件的主要优势之一是溶液可处理性,这使得可以通过多种印刷方法制备有机电子器件。丝网印刷作为一种十分成熟的印刷方法,被广泛应用于微电子器件的制备。本文主要从丝网印刷的组成、影响丝网印刷精密度的因素以及丝网印刷在场效应晶体管、太阳能电池、有机发光二极管等柔性电子器件制备中的应用分别作以介绍,并对目前丝网印刷在印刷柔性电子器件中存在的困难和挑战作以总结。     

气相色谱-质谱联用法在火药剖析中的应用

采用固液萃取的方法对火药样品进行处理,用气相色谱-质谱联用法对某未知火药进行成分剖析,以选择离子质谱法进行定量。目标化合物浓度在20-50mg／L范围内与色谱峰面积呈良好的线性关系,相关系数在0．9940～0．9996之间。方法加标回收率为96．9％～104.3％,测定结果的相对标准偏差为2．4％-4．9％（n=5）.气相色谱-质谱联用法可用于火药剖析研究。     

4-乙烯吡啶-丁烯酮共聚物与铑的顺二羰基配合物结构和性能研究

<正> 在铑催化剂的作用下,甲醇与一氧化碳经羰基化反应为乙酸和乙酸甲酯,是60年代发展起来的新工艺,但以往多是采用均相小分子铑催化剂,除我们的工作以外,迄今尚少见报道有采用以共聚物为配体的高分子铑催化剂的成功先例。     

La3B6O13(OH): The First Acentric High-Pressure Borate Displaying Edge-Sharing BO4 Tetrahedra

La₃B₆O₁₃(OH) was obtained by a high-pressure/high-temperature experiment at 6 GPa and 1673 K. The compound crystallizes in the space group P2₁ (no. 4) with the lattice parameters a=4.785(2), b=12.880(4), c=7.433(3) Å, and β=90.36(10)°, and is built up of corner- as well as edge-sharing BO₄ tetrahedra. It represents the first acentric high-pressure borate containing these B₂O₆ entities. The compound develops borate layers of „sechser“-rings with the La³⁺ cations positioned between the layers. Single-crystal and powder X-ray diffraction, vibrational and MAS NMR spectroscopy, second-harmonic generation (SHG) and thermoanalytical measurements, as well as computational methods were used to affirm the proposed structure and the B₂O₆ entities.