利用ARGO实验寻找GRBs的本底研究

位于西藏羊八井宇宙线观测站(海拔4300 m)的ARGO-YBJ实验具有高海拔、大视场、全覆盖特点,其阈能约几百个GeV,在探测高能GRBs方面具有独特的优势.ARGO-YBJ实验不能分辨光子和质子,要在大量的宇宙线事例中找出光子信号,就必须正确地估计背景事例率,这是寻找高能GRBs的关键.本文采用"等天顶角法"对ARGO实验中寻找GRBs的宇宙线本底进行了分析.由于地球的自转,天顶角随着时间的变化而变化.本文重点分析了长暴在其持续时间内天顶角的变化,从而更加准确地进行了本底估计.     

序列模式挖掘的两种典型算法及比较

序列模式挖掘是数据挖掘的重要分支,GSP算法与PSP算法是序列模式挖掘中的两种典型算法。本文介绍了这两种算法并对其进行了分析与比较。     

三维光盘存储系统中双光头同步控制的频域分析与辨识

详细介绍了双光头同步控制原理.对采集的伺服模块聚焦误差跟踪信号及共焦模块读写光头的聚焦线圈驱动信号进行了频域分析,并以此两路信号作为系统输入输出,分别对三种参数模型进行参数优化.根据3种模型的频率响应及阶跃响应,选择双光头同步控制过程的参数模型为[450]阶的ARX模型.实测曲线与模型仿真结果符合度(fit)为78.0259%.     

基于PLC现场数据采集与分析

介绍了PLC控制器的可行性分析,阐述了基于PROFIBUS工业以太网数据采集的研究,并提出了基于PLC现场数据采集与分析的方法。     

Differential pulse anodic stripping voltammetric determination of traces of copper with a tobramycin-Nafion modified electrode.

A Nafion-modified glassy carbon electrode incorporated with tobramycin for the voltammetric stripping determination of Cu2+ has been explored. The electrode was fabricated by tobramycin containing Nafion on the glassy carbon electrode surface. The modified electrode exhibited a significantly increased sensitivity and selectivity for Cu2+ compared with a bare glassy carbon electrode and the Nafion modified electrode. Cu2+ was accumulated in HAc-NaAc buffer (pH 4.6) at a potential of -0.6 V (vs. SCE) for 300 s and then determined by differential pulse anodic stripping voltammetry. The effects of various parameters, such as the mass of Nafion, the concentration of tobramycin, the pH of the medium, the accumulation potential, the accumulation time and the scan rate, were investigated. Under the optimum conditions, a linear calibration graph was obtained in the concentration range of 1.0 x 10(-9) to 5.0 x 10(-7) mol l(-1) with a correlation coefficient of 0.9971. The relative standard deviations for eight successive determinations were 4.3 and 2.9% for 1.0 x 10(-8) and 2.0 x 10(-7) mol l(-1) Cu2+, respectively. The detection limit (three times signal to noise) was 5.0 x 10(-10) mol l(-1). A study of interfering substances was also performed, and the method was applied to the direct determination of copper in water samples, and also in analytical reagent-grade salts with satisfactory results.     

Monte Carlo散射标记方法在辐射防护设计中的应用

在X射线检查系统中,辐射防护中除了需要重点考虑透射和漏射外,散射的成分也必须考虑,而且散射的影响变得越来越重要,这一点在同方威视的固定式、组合式和车载式系统中都已经得到了体现。针对散射的问题,该文进行了系统的研究,提出了在Monte Carlo计算中采用散射标记方法分析各散射体对于散射的贡献,克服了传统方法无法准确计算某一点的散射剂量率以及各散射体对散射的贡献的局限,并利用实验进行了验证。该文采用的计算工具是Geant4软件包。结果表明,该文提出的方法是可行的,尤其在复杂系统的辐射防护优化设计中具有较好的指导作用。     

广纳文化根系与壮族的文化生态美——壮族文化生态美研究之三

壮族具有一种可称为广纳性文化根系 ,表现为对异质文化的宽容、平等和吸纳和对苗瑶文化、汉族文化的宽容和吸纳 ,形成了壮族许多再生文化、杂糅文化形态 ,也使壮族文化符合生态文化的共生规律。     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

废热锅炉盘管的非正常损伤

By using optical microstructure(OM), X-ray diffractometer analyses and mechanical properties testing, the abnormal damage of pipe coil in remaining heat boiler has been investigated. The damage is the result of the melting of tube base metal at high temperature caused by the ignition inside the tube.