一缩二甘醇酸体系荧光分析法同时测定钆和铽

本文研究了Ｇｄ＾３＾＋，Ｔｂ＾３＾＋与一缩二甘醇酸形成络合物的荧光性能及发光机理，探讨了Ｇｄ＾３＾＋，Ｔｂ＾３＾＋同时测定的最佳条件和共存离子的影响。Ｇｄ＾３＾＋，Ｔｂ＾３＾＋的检测限分别为１６０和３ｎｇ／ｍｌ。并将该法成功地应用于稀土氧化物中Ｇｄ＾３＾＋，Ｔｂ＾３＾＋的测定。     

互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

马来酸酐与1，2－环己烷二羧酸二异丁酯的气液平衡

采用小沸点仪测定了马来酸酐和1,2－环己烷二羧酸二异丁酯二元系统在不同配料组成条件下的温度与压力数据，并通过内插法得到不同压力下的温度与配料组成的数据.进一步采用单纯形法优化NRTL方程参数，推算了平衡气液相组成，发现该二元系统具有最高压力恒沸点，且该恒沸点随压力的变化显著.当压力降低至20 kPa时, 由温度随气相组成的变化趋势知该恒沸点将趋于消失.     

Two 3D supramolecular polymers constructed from an amino acid and a high-nuclear Ln6Cu24 cluster node

The first successful attempt to construct 3D supramolecular frameworks with high-nuclear 3d-4f heterometallic clusters as a node is reported. The self-assembly of Ln3+, Cu2+ and amino acid in solution leads to the formation of two polymers, 35-nuclear complex [Sm6Cu29] 1 with a primitive cubic net-like structure and 36-nuclear complex [Nd6Cu30] 2 with a face-centred cubic network type structure. Glycine and L-proline, respectively, were used as ligands. It should be noted that 2 has a chiral framework. X-ray structure analyses show that 1 crystallizes in the triclinic P1 space group (a=19.6451(8), b=20.4682(8), c=20.7046(8) A, alpha=89.453(1), beta=66.290(1), gamma=68.572(1) degrees, V=7003.0(5) A3 and Z=1) and 2 belongs to the cubic P2(1)3 space group (a=b=c=32.4341(3) A, V=34 119.7(5) A3 and Z=4). Both complexes utilize Ln6Cu24 octahedral clusters as nodes and trans-Cu(amino acid)2 groups as bridges. Electrical conductivity measurements reveal that both polymers behave as semiconductors.     

烟酸对酸性硫酸盐体系铜电沉积的影响

对溶液A: 0.8 mol•L－1硫酸铜,0.6 mol•L－1硫酸,5.0×10－5 mol•L－1氯离子,1.0×10－4 mol•L－1聚乙二醇的溶液,溶液B:在溶液A中加入2.0×10－2 mol•L－1烟酸,pH为0.5,运用循环伏安和计时安培法研究玻碳电极上铜的电沉积行为.结果表明,铜的电沉积过程经历了晶核形成过程,其电结晶按瞬时成核和三维生长方式进行.烟酸的加入对铜的电沉积具有阻化作用,但不改变铜的电结晶机理.沉积层的X射线衍射表明Cu为面心立方结构,在烟酸存在下沉积层出现(220)高择优取向,这可能是烟酸在Cu(220)晶面上发生强烈吸附作用的结果.     

Immunoassay of P-glycoprotein on single cell by capillary electrophoresis with laser induced fluorescence detection

The cellular mechanism based on P-glycoprotein (PGP) for its drug pump function has become very important in multidrug resistance (MDR) research. A method has been established to characterize PGP on single K562 cell by coupling capillary electrophoresis with laser induced fluorescence detection. A permeable intact cell after the immunoassay binding with fluorescence labeling antibody was injected into the capillary and directly separated without lysis. It was found that once 5-10 optional cells were detected in batch, the PGP amount on this cell line could be outlined and calculated clearly. The PGP amount on K562 MDR cell line is 3.88 times higher than that on K562 sensitive cell line. These two cell lines with immunoassay binding were also analyzed by injection of multi-cells in order to improve the throughput. A resistance factor so called multidrug resistance multiple (MRM) was introduced to evaluate the MDR difference between cell lines. The MRM values of the cell line K562 measured by single cell analysis are well correlated with those by flow cytometry, which also prove the validity of our method in single cell analysis for the possibility of cancer diagnosis, pharmacokinetics and drug screening in future.     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

高分子固载化Lewis酸催化剂——聚苯乙烯-三氯化铝/四氯化钛复合物

<正> 均相催化剂的固载化是目前催化剂研究方向之一。Skct等首次将BF_5和AlCl_3分别与苯乙烯反应制成高分子催化剂,对酯化、缩醛、缩酮等有机反应具有良好的催化作用。我们曾将四氯化钛与聚苯乙烯反应制成一种稳定复合物,有良好的催化效能。为了改进其重复使用性能,本文将等摩尔的AlCl_3,和TiCl_4的Lewis酸同时与聚苯乙烯交     

NdOx作为助催化剂对PtRu/C电催化氧化甲醇活性的影响

采用沉积-还原法制备了PtRu-NdOx/C催化剂, 借助TEM、EDS和XRD等测试手段对其进行了微结构和组成的表征. 结果表明, 催化剂中Pt与Ru以合金形式存在, 而Nd的氧化物则以无定形形态存在. 催化剂粒子的平均粒径在2 nm左右, 晶胞参数为0.3896 nm, Nd氧化物的加入对PtRu合金的晶体结构影响不明显. 采用循环伏安法和计时电流法, 比较了PtRu-NdOx/C催化剂和PtRu /C催化剂对甲醇氧化的电催化活性, 结果表明, 加入Nd的氧化物作为助催化剂能明显提高PtRu /C催化剂对甲醇氧化的电催化性能.