Silver Nanowires as Templates for Preparation of Amorphous Carbon Nanotubes

In this report, we describe a novel method for preparing amorphous carbon nanotubes (ACNT) from silver nanowires using a carbon replica technique. ACNT size and shape are determined by the template silver nanowire. Interspaces between carbon grains present in the ACNT wall cause the wall to act as a permeable membrane through which reactants pass freely. Simple chemical modifications can be used to modify the diameter of the silver filaments within. We anticipate that this method will prove useful in preparing a wide variety of nanometer-sized filaments, perhaps with the replica itself able to serve as a template in casting nanomaterials of assorted shapes. Copyright 2000 Academic Press.     

Titrimetric determination of thiocyanate and thiosulphate ions by oxidation with iodine in alkaline solution

Thiocyanate (2.7-90 mug) and thiosulphate (4.5-90 mug) ions are oxidized by iodine in alkaline media to sulphate ions. After acidification, the excess of iodine is extracted into chloroform, and the iodide ions formed in the redox reaction subjected to an amplification reaction. Either a titrimetric or a spectrophotometric finish may be used. Each thiocyanate and thiosulphate ion results in the ultimate production of 19 and 24 iodine molecules, respectively.     

Air oxidation of hydrazine. 1. Reaction kinetics on natural kaolinites, halloysites, and model substituent layers with varying iron and titanium oxide and O- center contents

Air oxidation of hydrazine was studied by using a group of kaolinites, halloysites, and substituent oxides as models for the tetrahedral and octahedral sheets. The rate was found to be linear with oxygen. The stoichiometry showed that oxygen was the primary oxidant and that dinitrogen was the only important nitrogen-containing product. The rates on kaolinites were strongly inhibited by water. Those on three-dimensional silica and gibbsite appeared not to be. That on a supposedly layered silica formed from a natural kaolinite by acid leaching showed transitional behavior--slowed relative to that expected from a second-order reaction relative to that on the gibbsite and silica but faster than those on the kaolinites. The most striking result of the reaction was the marked increase in the rate of reaction of a constant amount of hydrazine as the amount of clay was increased. The increase was apparent (in spite of the water inhibition at high conversions) over a 2 order of magnitude variation of the clay weight. The weight dependence was taken to indicate that the role of the clay is very important, that the number of reactive centers is very small, or that they may be deactivated over the course of the reaction. In contrast to the strong dependence on overall amount of clay, the variation of amounts of putative oxidizing centers, such as structural Fe(III), admixed TiO2 or Fe2O3, or O- centers, did not result in alteration of the rate commensurate with the degree of variation of the entity in question. Surface iron does play some role, however, as samples that were pretreated with a reducing agent were less active as catalysts than the parent material. These results were taken to indicate either that the various centers interact to such a degree that they cannot be considered independently or that the reaction might proceed by way of surface complexation, rather than single electron transfers.     

Bond dissociation energies and radical stabilization energies associated with model peptide-backbone radicals

Bond dissociation energies (BDEs) and radical stabilization energies (RSEs) have been calculated for a series of models that represent a glycine-containing peptide-backbone. High-level methods that have been used include W1, CBS-QB3, U-CBS-QB3, and G3X(MP2)-RAD. Simpler methods used include MP2, B3-LYP, BMK, and MPWB1K in association with the 6-311+G(3df,2p) basis set. We find that the high-level methods produce BDEs and RSEs that are in good agreement with one another. Of the simpler methods, RBMK and RMPWB1K achieve good accuracy for BDEs and RSEs for all the species that were examined. For monosubstituted carbon-centered radicals, we find that the stabilizing effect (as measured by RSEs) of carbonyl substituents (CX=O) ranges from 24.7 to 36.9 kJ mol(-1), with the largest stabilization occurring for the CH=O group. Amino groups (NHY) also stabilize a monosubstituted alpha-carbon radical, with the calculated RSEs ranging from 44.5 to 49.5 kJ mol(-1), the largest stabilization occurring for the NH2 group. In combination, NHY and CX=O substituents on a disubstituted carbon-centered radical produce a large stabilizing effect ranging from 82.0 to 125.8 kJ mol(-1). This translates to a captodative (synergistic) stabilization of 12.8 to 39.4 kJ mol(-1). For monosubstituted nitrogen-centered radicals, we find that the stabilizing effect of methyl and related (CH2Z) substituents ranges from 25.9 to 31.7 kJ mol(-1), the largest stabilization occurring for the CH3 group. Carbonyl substituents (CX=O) destabilize a nitrogen-centered radical relative to the corresponding closed-shell molecule, with the calculated RSEs ranging from -30.8 to -22.3 kJ mol(-1), the largest destabilization occurring for the CH=O group. In combination, CH2Z and CX=O substituents at a nitrogen radical center produce a destabilizing effect ranging from -19.0 to -0.2 kJ mol(-1). This translates to an additional destabilization associated with disubstitution of -18.6 to -7.8 kJ mol(-1).     

Qualitative features of the two-dimensional Raman spectrum in liquids

The theory presented earlier [J. Kim and T. Keyes, Phys. Rev. E 66, 051110 (2002)] is analyzed to determine the information available from the two-dimensional Raman spectrum R((5))(t(2),t(1)) in liquids. The known spectra are well represented by the sum of two products of ordinary time correlations predicted by the theory. The shape of R((5)) is related in general to the values of simple same-time averages and concepts amenable to physical intuition. Using standard models for the time correlations entering the theory, specific analytic expressions for the spectrum are obtained depending on two parameters and a time scale, and the behavior of the spectrum is mapped out in the parameter space.     

Water adsorption in disordered mesoporous silica (Vycor) at 300 K and 650 K: a Grand Canonical Monte Carlo simulation study of hysteresis

This numerical simulation paper focuses on the adsorption/desorption of water in disordered mesoporous silica glasses (Vycor-like). The numerical adsorbent was previously obtained by off lattice method, and was shown to reproduce quite well the micro- and mesotextural properties of real Vycor, as well as morphological (pore size distribution) and topological (pore interconnections) disorder. The water-water interactions are described by the SPC model while water-silica interactions are calculated in the framework of the PN-TrAZ model. The water adsorption/desorption isotherms and the configurational energies are calculated by the Grand Canonical Monte Carlo simulation method. The low pressure results compare well with experiments, showing the good transferability of the intermolecular potential. It is shown that if the hysteresis loop observed in the adsorption/desorption isotherm is considered as a true phase transition (which is actually still an open question in the case of disordered porous materials), then it is possible to calculate the grand potential by applying the thermodynamic integration scheme. The grand potential is shown to be multivalued for low (subcritical) temperature, and continuous for high (supercritical) temperature. A coexistence point is found within the hysteresis loop, actually close to the vertical desorption line. Below the equilibrium chemical potential, the gaslike branch is stable whereas the liquidlike branch is metastable. The situation is reversed above the coexistence point.     

Fast sample preparation involving MASE and coupled column normal phase liquid chromatography for the rapid trace analysis of dioxins in air-dust samples from fire catastrophe emissions

A new approach has been developed and tested for the urgent analysis of dioxins in samples of air-dust filters originating from catastrophe emissions. The procedure consists of a fast extraction of the sample with microwave solvent extraction (MASE) and acetone as solvent followed by a fast cleanup of the extract with normal phase coupled column liquid chromatography (LC/LC).

The multi-dimensional LC/LC system employs a 50 mm×4.6 mm i.d. column packed with 3 μm silica and a 150 mm×4.6 mm i.d. column packed with 5 μm PYE as the first and second analytical column, respectively. Iso-hexane is used on both columns to perform cleanup and dichloromethane to perform efficient back-flush elution of the compounds from the second column. The obtained polarity-based separation in the first dimension and molecular-structure based separation in the second dimension provides a fast and powerful cleanup.

Validation was done by analysing samples of homemade RIVM air-dust with aged residues (n=8, spiking level about 15 pg mg⁻¹ per compound) of dioxins/furans and samples of reference Urban Dust SRM 1649a (n=4) with both the new approach and the existing conventional procedure and were instrumentally analyzed with capillary gas chromatography and high resolution mass spectrometric detection (GC/HRMS).

In comparison to the existing conventional procedure, the new approach reduces sample processing from several days to several hours per sample.

As regards the aged-residue air-dust samples, the new method shows a good accuracy, precision and high selectivity providing a performance in good agreement with the existing procedure. In SRM air-dust, the concentration of a few compounds obtained by the new method was below (10–50%) the certified value.     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

Highly conjugated p-quinonoid pi-extended tetrathiafulvalene derivatives: a class of highly distorted electron donors

A new class of pi-extended TTF-type electron donors (11 a-c) has been synthesized by Wittig-Horner olefination of bianthrone (9) with 1,3-dithiole phosphonate esters (10 a-c). In cyclic voltammetry experiments, donors 11 a-c reveal a single, electrochemically irreversible oxidation-yielding the corresponding dicationic products-at relatively low oxidation potentials (approximately 0.7-0.8 V). Theoretical calculations, performed at the DFT level (B3 P86/6-31 G*), predict a highly-folded C(2h) structure for 11 a. In the ground state, the molecule adopts a double saddle-like conformation to compensate the steric hindrance. The calculations suggest that the intramolecular charge transfer associated with the HOMO-->LUMO transition is responsible for an absorption band observed above 400 nm. While the radical cation 11 a*+ retains the folded C(2h) structure predicted for the neutral molecule as the most stable conformation, the dication 11 a(2+) has a fully aromatic D(2) structure, formed by an orthogonal 9,9'-bianthryl central unit to which two singly-charged dithiole rings are attached. The drastic conformational changes that compounds 11 undergo upon oxidation account for their electrochemical properties. By means of pulse radiolysis measurements, radical-induced one-electron oxidation of 11 a-c was shown to lead to the radical cation species (11 a-c*+), which were found to disproportionate with generation of the respective dication species (11 a-c(2+)) and the neutral molecules (11 a-c).     

pH gradient high-performance liquid chromatography: theory and applications

pH gradient high-performance liquid chromatography (HPLC) is a method of reversed-phase high-performance liquid chromatography suitable for ionogenic substances. It consists in programmed increase during the chromatographic process of the eluting strength of eluent with respect to the analytes separated. On the analogy of the conventional organic modifier gradient reversed-phase HPLC, in the pH gradient approach the eluting strength of the mobile phase increases due to its changing pH: increasing in case of acids or decreasing in case of bases. At the same time the content of organic modifier remains constant. A theory of the pH gradient HPLC has been elaborated. The resulting mathematical model is easily manageable. Its ability to predict changes in retention and separation of analytes following the changes in chromatographic conditions is demonstrated. The pH gradient method is uniquely suitable to determine pKa values of analytes. An equation is presented allowing to calculate pKa values basing on appropriate retention data. The effects on pKa are discussed of the concentration of methanol in the mobile phase. The RP HPLC-derived pKa data correlate to the reference pKa values (w(w)pKa) but are not identical. That may be explained by the effects on the chromatographically determined pKa of the specific interactions of analytes with stationary phases. The proposed pH gradient RP HPLC procedure offers a fast and convenient means to get comparable acidity parameters for larger series of compounds, like drug candidates, also when the analytes are available only in minute amounts and/or as complex mixtures.