Enhanced fluorescence from arrays of nanoholes in a gold film

Arrays of sub-wavelength holes (nanoholes) in gold films were used as a substrate for enhanced fluorescence spectroscopy. Seven arrays of nanoholes with distinct periodicities (distances between the holes) were fabricated. The arrays were then spin-coated with polystyrene films containing different concentrations of the fluorescent dye oxazine 720. The dye was excited via resonant extraordinary transmission of the laser source through the nanoholes. Enhanced fluorescence was observed when the geometric characteristics of the arrays allowed for an enhancement in the transmitted excitation. This enhancement occurred via surface plasmon excitation by the laser and a consequential increase in the local electromagnetic field in a sub-wavelength region at the metal-film interface. It was demonstrated that the sensitivity of the fluorescence measurement (change in signal vs change in dye concentration in the polymer film) is significantly larger at the surface plasmon resonance conditions than that obtained from equivalent films on glass substrates. Enhancement factors for the fluorescence emission were calculated for each array, with a maximum enhancement of close to 2 orders of magnitude as compared to the emission of films on glass. The results presented here indicate that arrays of nanoholes are interesting substrates for the development of fluorescence sensors based on surface plasmon resonance, as they provide a platform that allows both spatial confinement and enhancement of excitation light. Moreover, the collinear characteristics of the present optical setup, due to the resonant extraordinary transmission through the nanohole arrays, are more conducive to miniaturization and chip integration than more traditional experimental geometries.     

The synthesis and the solvent and substituent effect on the spectroscopic characteristic of 3-ethyl-2-(p-substitued styryl)benzothiazolium iodides

The photophysical and photochemical properties of p-substitued 2-styryl-ethylbenzothiazolium iodides, possessing different electron-withdrawing or electron-donating groups are described. The dyes were prepared by the condensation of 3-ethyl-2-methylbenzothiazole salts with p-substituted benzaldehydes. The synthesis of suitable substrates is presented as well. We describe here the absorption, emission spectra and the luminescence quantum yield of hemicyanine dyes (SH) measured in 11 different organic solvents of varying polarity. Molecular structure of the synthesized dyes was established by (1)H NMR, electronic absorption and fluorescence spectrometry. The spectral data confirmed that all the compounds exist in E-configuration of their styryl residues. The planar molecular conformation is typical for the compounds with five-membered side aromatic moieties (for example benzothiazole). The compounds possessing N-alkyl substituent in phenyl ring, in contrast to the compounds with other substituents, exhibit low fluorescence quantum yield in THF solution. This indicates that for N-alkyl derivatives the non-radiative processes are much more effective than the radiative ones. The electronic absorption and fluorescence emission spectra of tested dyes demonstrate high sensitivity to the nature of substituent introduced into the aromatic ring.     

Third-order nonlinear optical figure of merits for conjugated TTF-quinone molecules

We have revealed a substantial enhancement of third-order optical figure of merits by the synthesis of a compact molecule possessing the tetrathiafulvalene (TTF) group with two backside C=O groups. Addition of the saturated methylene chain substantially suppresses the third-order optical figure of merits and even local optical hyperpolarizabilities at lambda = 532 nm. Another TTF-derivative molecule possessing ethylenic and acetylenic chains demonstrates large hyperpolarizabilities; however, generally, the figure of merit factor decreases due to the increasing optical losses as a consequence of enhanced linear absorption. At the same time, both of the chromophores have a large nonlinear optical response. General approaches for search and design of the third-order optical materials with improved properties are given.     

HPLC isolation and NMR structure elucidation of the most prominent octabromo isomer in technical octabromo diphenyl ether

The major octabromo isomer of technical octabromo diphenyl ether mixture (technical octaBDE) DE-79 was isolated by RP-HPLC. Three serially coupled columns (each 250 mm long) enabled a good separation of the target compound from other congeners using 100% ACN as eluent. Approximately 100 microg of the target compound was isolated with a purity of >90% and investigated by MS for confirmation of the degree of bromination. 1H-NMR and 2-D 1H-13C correlation NMR spectra unequivocally clarified that the octaBDE in question is 2,2',3,3',4,4',6,6'-octabromodiphenyl ether (BDE 197). Based on annual production rates of technical BDE products (1999/2001), approximately 380 tons of BDE 197 were annually produced which, on the long term, may enter the environment. Compared with other individual BDE congeners, BDE 197 has the seventh highest application rate. Reductive debromination of BDE 197 can lead to four hepta-, 15 hexa-, 23 penta-, and 28 tetra-BDE isomers, respectively. This variety includes all known major BDEs of environmental concern (BDE 47, 85, 99, 100, 153, 154, and 183). The identification of BDE 197 in technical octaBDE DE-79 strongly suggests that research on the environmental fate of BDEs should include this key-BDE congener.     

Structure and properties of a novel 3D straight-channel polyoxovanadate and an unexpected trimeric barbiturate obtained by hydrothermal reactions

The hydrothermal reaction of NaVO(3).H(2)O, barbituric acid, NH(2)NH(2).2HCl, H(3)PO(4), and H(2)O gave a novel heteropolyoxovanadate Na(6)[(P(V)O(4))V(V)(6)V(IV)(12)O(39)](2).H(3)PO(4).31H(2)O (1) and an unexpected phase Na(2)[C(12)H(6)N(6)O(9)].7H(2)O (2). The basic building blocks in 1 are the six-capped sphere-shaped heteropoly anion [(P(V)O(4))V(V)(6)V(IV)(12)O(39)](3-) with framework similar to that of the reported polyoxovanadates possessing [V(18)O(42)] clusters encapsulating VO(4) or other ions. These heterpoly anionic units are linked via V[bond]O[bond]V bridges into an interesting 3D straight-channel structure. The structure of 2 consists of novel organic anions ([C(12)H(6)N(6)O(9)](2-), 5,5-bis(2',4',6'-trioxopyrimidyl)barbital, representing the first oxidized barbituric acid trimer) linked via sodium ions into 1D hollow tubes with diameter of 4.49 x 6.86 A and further connected into a three-dimensional framework via hydrogen bonds.     

The concerted addition of HBr to aryl alkynes; orthogonal pi bond selectivity

In a weakly acidic solution, the addition of HBr to 1-phenylprop-1-yne produces predominantly the anti-Markovnikov product. In this paper, we consider five possible explanations for this behavior and conclude that the concerted addition is occurring on the acetylenic pi bond orthogonal to the extended aromatic pi system. The electronic effect of the distal methyl group and the steric hindrance of the coplanar phenyl ring combine to promote bromide attack at the beta carbon. Attack on this pi bond is insensitive to the electronic effect of meta and para substituents on the ring but is very (sterically) sensitive toward all ortho substituents.     

Synthesis of the ABC ring system of manzamine A

A synthesis of the core ABC ring system of the manzamine alkaloids is described, starting from arecoline. The key steps involve a Claisen rearrangement to set up a 4-substituted-3-methylenepiperidine and a stereoselective azomethine ylide dipolar cycloaddition reaction. Condensation of the aldehyde 6 and sarcosine ethyl ester hydrochloride salt gives an intermediate azomethine ylide, which undergoes an intramolecular cycloaddition reaction to set up two new rings and three new chiral centers stereoselectively. The aldehyde 6 was not a suitable substrate for related azomethine ylide cycloaddition reactions with other amines. However, the related dimethyl acetal 26 could be condensed with a variety of amines to give the desired tricyclic products. The cycloaddition reaction with N-methyl or N-allyl glycine ethyl ester gave almost exclusively the exo adduct, whereas cycloaddition with glycine ethyl ester gave the endo adduct.     

Evaluation of the disintegration time of rapidly disintegrating tablets via a novel method utilizing a CCD camera

Many kinds of rapidly disintegrating or oral disintegrating tablets (RDT) have been developed to improve the ease of tablet administration, especially for elderly and pediatric patients. In these cases, knowledge regarding disintegration behavior appears important with respect to the development of such a novel tablet. Ordinary disintegration testing, such as the Japanese Pharmacopoeia (JP) method, faces limitations with respect to the evaluation of rapid disintegration due to strong agitation. Therefore, we have developed a novel apparatus and method to determine the dissolution of the RDT. The novel device consists of a disintegrating bath and CCD camera interfaced with a personal computer equipped with motion capture and image analysis software. A newly developed RDT containing various types of binder was evaluated with this protocol. In this method, disintegration occurs in a mildly agitated medium, which allows differentiation of minor distinctions among RDTs of different formulations. Simultaneously, we were also able to detect qualitative information, i.e., morphological changes in the tablet during disintegration. This method is useful for the evaluation of the disintegration of RDT during pharmaceutical development, and also for quality control during production.