GaN基异质外延膜中Al组分含量测试方法综述

介绍了目前可用于AlGaN半导体异质外延膜中Al组分含量测定的多种测试技术,包括高分辨X射线衍射技术、光致发光法、紫外-可见光透射光谱法、电子探针法、卢瑟福背散射法等,并对各种测试技术的原理和优缺点进行了概述。     

校准蒸发光散射检测器选用标准物质的比较与分析

通过对葡萄糖和三氯蔗糖的物理、化学性质的比较,采用高效液相色谱仪和蒸发光散射检测器进行标准溶液色谱峰面积的检测,并用G rubbs检验法对其数据进行异常值检验。结果表明,三氯蔗糖相对于葡萄糖较为稳定,选用三氯蔗糖作为蒸发光检测器校准用标准物质比较合适。     

高效液相色谱法测定旋复花中槲皮素的含量

建立了高效液相色谱法测定旋复花中槲皮素含量的方法。该方法采用ZORBAX eclipse XDB C8色谱柱(150mm×4.6mm,5μm),流动相为甲醇-磷酸(0.2%),体积比为65∶35,检测波长为370nm。实验结果表明,槲皮素在5.0～100.0μg/mL范围内与峰面积线性关系良好(r=0.9999),测定结果的相对标准偏差为1.2%(n=6),平均加标回收率为97.1%。该法可用于测定旋复花中槲皮素的含量。     

金属铜配合物催化氧化1-(3,4-二甲氧基苯)乙醇的动力学研究

合成了1-(3,4-二甲氧基苯)乙醇(DMPE)作为木质素模型物,并用初始速率法研究了40℃时在pH6.5～8.5磷酸缓冲溶液中N,N-双(2-乙基-5-甲基-咪唑-4-亚甲基)乙醇胺合铜、N,N-双(2-(2-羟乙基胺基)乙基)草酰胺合铜和5,7,12,14-四甲基-1,4,8,11-四氮杂环十四-4,7,11,14-四烯合铜催化氧化1-(3,4-二甲氧基苯)乙醇的动力学,提出了1-(3,4-二甲氧基苯)乙醇氧化反应动力学模型,并由此计算出不同pH值条件下催化反应动力学参数k2和Km.铜配合物的催化活性随着pH的增大而增大.具有大共轭体系的配体催化剂表现出更好的催化活性.提出并讨论了H2O2氧化DMPE的催化氧化反应机理.     

Electrophoretic sol–gel synthesis of SrBi<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>9</Subscript> nanowires

We report the independent invention of perovskite ferroelectric nanowires strontium bismuth tantalate (SrBi₂Ta₂O₉, SBT). Electrophoretic sol–gel techniques have been used successfully. The morphology and structures are analyzed via SEM, TEM and XRD. SBT nanowires and nanoparticles filled template revealed 30 and 40 μm long, respectively. SBT are proved to be a single phase of orthorhombic perovskite structure. As it indicated, SBT nanowires has been crystallized at 700 °C. To minimize surface polarity, SBT nanowires oriented preferentially along the growing axis (c axis) by translation and rotation of atomic clusters of SBT.     

Iron/copper promoted oxidative homo-coupling reaction of terminal alkynes using air as the oxidant

An inexpensive catalytic system, which used a readily available Fe(acac)₃ and trace quantity of Cu(acac)₂ as the co-catalyst and air as the oxidant for the homo-coupling of terminal alkynes, has been developed. The catalytic system could also apply to the cross-coupling reaction of two different terminal alkynes.     

Heat Capacities and Thermodynamic Properties of Aqueous SrCl<Subscript>2</Subscript> Solutions in the Temperature Range from 80 to 320 K

The molar heat capacities of three different concentrations of aqueous SrCl₂ solutions, 0.1212, 0.4615 and 1.878 mol⋅kg⁻¹, were measured, using a precision automated adiabatic calorimeter in the temperature range from 80 to 320 K. Solid–liquid phase transitions were observed at 272.83, 270.18 and 255.15 K, respectively, for these three solutions. The molar enthalpies and entropies of the phase transitions were evaluated. The experimental heat capacity data were fitted to polynomial equations, and based on the polynomial equations and thermodynamic relationship, the thermodynamic functions relative to 298.15 K, [H _T −H _298.15 K] and [S _T −S _298.15 K], of the three solutions were derived in the range of 80 to 320 K with an interval of 5 K.     

Two-step synthesis of Bi2Te3-Te nanoarrays with sheet-rod multiple heterostructure

Bi₂Te₃-Te arrays with sheet-rod multiple heterostructure were obtained in large scale, using Te nanorod arrays as the in-situ templates under solvothermal process. The array is formed by the ordered Bi₂Te₃-Te rods where Bi₂Te₃ sheets distribute from the top face to the bottom face along the Te rod vertically. The microstructure of the heterostructure was studied through X-ray diffraction, scanning electron microscopy and transmission electron microscopy. The electrical conductivity and Seebeck coefficient of the arrays were also studied. The course of reaction was monitored so as to propose a possible growth mechanism of such novel heterostructure. The key for the preparation of such heterostructure is to balance the velocity between the dissolution of Te rods and the formation of Bi₂Te₃ sheets. This synthetic approach could be promising to prepare self-assembled low-dimensional nanoarrays of metals and semiconductors with high yield.     

Microwave hydrothermal synthesis and photocatalytic activity of AgIn5S8 for the degradation of dye

AgIn₅S₈ powders were successfully synthesized by a microwave hydrothermal method for the first time. This method is a mild and highly efficient route involves no templates, catalysts, or surfactants. Therefore, it is very promising for the low-cost and large-scale industrial production. The samples were characterized by X-ray diffraction, UV-vis spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The photocatalytic activity of AgIn₅S₈ nanoparticles was investigated through the degradation of methyl orange under visible light irradiation. Compared with TiO_2−xN_x, AgIn₅S₈ has exhibited a superior activity under the same condition. A liquid chromatogram-mass spectrometer was used to separate and identify the dye and degradation products generated during the reaction. According to the experiment results, a possible mechanism for the degradation of organic pollutant over AgIn₅S₈ was proposed.