General Approach to Single and Hybrid Metal Oxide Fiber Structures for High‐Performance Lithium‐Ion Batteries

Owing to the high specific capacity and energy density, metal oxides have become very promising electrodes for lithium‐ion batteries (LIBs). However, poor electrical conductivity accompanied with inferior cycling stability resulting from large volume changes are the main obstacles to achieve a high reversible capacity and stable cyclability. Herein, a facile and general approach to fabricate SnO₂, Fe₂O₃ and Fe₂O₃/SnO₂ fibers is proposed. The appealing structural features are favorable for offering a shortened lithium‐ion diffusion length, easy access for the electrolyte and reduced volume variation when used as anodes in LIBs. As a consequence, both single and hybrid oxides show satisfactory reversible capacities (1206 mAh g^?1 for Fe₂O₃ and 1481 mAh g^?1 for Fe₂O₃/SnO₂ after 200 cycles at 200 mA g^?1) and long lifespans.     

A Hybrid Assembly of MXene with NH2−Si Nanoparticles Boosting Lithium Storage Performance

A facile hybrid assembly between Ti₃C₂T_x MXene nanosheets and (3‐aminopropyl) triethoxylsilane‐modified Si nanoparticles (NH₂?Si NPs) was developed to construct multilayer stacking of Ti₃C₂T_x nanosheets with NH₂?Si NPs assembling together (NH₂?Si/Ti₃C₂T_x). NH₂?Si/Ti₃C₂T_x exhibits a significantly enhanced lithium storage performance compared to pristine Si, which is attributed to the robust crosslinking architecture and considerably improved electrical conductivity as well as shorter Li⁺ diffusion pathways. The optimized NH₂?Si/Ti₃C₂T_x anode with Ti₃C₂T_x: NH₂?Si mass ratio of 4 : 1 displays an enhanced capacity (864 mAh g^?1 at 0.1 C) with robust capacity retention, which is significantly higher than those of NH₂?Si NPs and Ti₃C₂T_x anodes. Furthermore, this work demonstrates the important effect of the MXene‐based electrode architecture on the electrochemical performance and can guide future work on designing high‐performance Si/MXene hybrids for energy storage applications.     

A Long‐Cycling Aqueous Zinc‐Ion Pouch Cell: NASICON‐Type Material and Surface Modification

Aqueous zinc‐ion batteries (ZIBs) have become the highest potential energy storage system for large‐scale applications owing to the high specific capacity, good safety and low cost. In this work, a NASICON‐type Na₃V₂(PO₄)₃ cathode modified by a uniform carbon layer (NVP/C) has been synthesized via a facile solid‐state method and exhibited significantly improved electrochemical performance when working in an aqueous ZIB. Specifically, the NVP/C cathode shows an excellent rate capacity (e. g., 48 mAh g^?1 at 1.0 A g^?1). Good cycle stability is also achieved (e. g., showing a capacity retention of 88% after 2000 cycles at 1.0 A g^?1). Furthermore, the Zn²⁺ (de)intercalation mechanism in the NVP cathode has been determined by various ex‐situ techniques. In addition, a Zn||NVP/C pouch cell has been assembled, delivering a high capacity of 89 mAhg^?1 at 0.2 A g^?1 and exhibiting a superior long cycling stability.     

台风过境下大型单桩式海上风机结构动力特性研究

风机大型化是我国海上风电技术发展的重要方向. 东南沿海是我国海上风电发展的重要基地, 这一区域频繁发生的台风对海上风机的影响不可忽略. 台风风场与常规大风风场有不同的湍流特性, 同时台风期间较高的风速会引起巨大的台风浪. 本文考虑台风经过期间独特的风场及波浪场, 开展风浪联合作用对大型单桩海上风机影响的研究. 基于DTU 10 MW大型单桩风机, 运用一体化分析软件SIMA建立风浪联合作用下大型单桩风机的耦合数值模型, 研究台风经过不同阶段大型风力机的动力响应特性. 计算结果显示, 叶片变桨能有效降低台风经过时风机叶片所受风载荷, 变桨状态下单桩风机所受风载荷主要来源于塔筒. 在台风经过的不同阶段, 大型单桩海上风机结构表现出不同的动力特性. 台风全过程塔筒运动均受波浪激发一阶频率控制, 塔基上方结构动力载荷以惯性载荷为主, FOVS至FEWS阶段及BOVS阶段至BEWS阶段塔筒运动一阶频率处响应能量增长较小, 响应能量向低频及波频转移. 塔基下方泥面线处剪力响应受波频控制, 弯矩响应受一阶频率控制.      

火灾与撞击联合作用下钢管混凝土柱力学性能研究

为研究火灾高温与撞击联合作用下钢管混凝土柱的力学性能,基于ABAQUS建立了高温作用下考虑轴力影响的钢管混凝土柱侧向撞击有限元模型。首先,对高温与撞击联合作用下考虑轴力影响的钢管混凝土柱的破坏模式与受力全过程进行了分析,探讨了高温下钢管混凝土柱的抗撞性能与工作机理;其次,重点研究了受火时间、材料强度、含钢率以及撞击能量对抗撞性能的影响,并给出了相关设计建议。研究结果表明:高温与撞击联合作用下,钢管混凝土柱主要发生受弯破坏;受火15 min后,构件抗撞性能明显降低。轴压力对构件抗撞性能产生不利影响,轴压比从0增加到0.2,受火60 min构件抗撞性能下降了7.8%;混凝土强度对高温下钢管混凝土柱抗撞性能有显著影响,受火90 min后,混凝土强度由30 MPa增加到50 MPa,构件抗撞性能提高约85%;外钢管强度与含钢率对高温下抗撞性能影响不大。     

利用生物信息学数据及工具合成表达链霉亲和素基因

目的:人工合成表达链霉亲和素基因,制备链霉亲和素磁珠复合物用于核酸分离.方法:利用NCBI、BCM等提供的生物信息及软件工具,将链霉亲和素蛋白的基因进行密码子优化,并分割成互为重叠的小片段寡聚核苷酸链,采用化学和酶促合成相结合的方法合成编码链霉亲和素蛋白基因.将纯化的链霉亲和素通过偶联剂与带羧基的磁粒共价结合,用于快速...     

MEMS磁场传感器的设计及测试

以U型梁为主要结构设计了一种新型的洛伦兹力驱动的磁场传感器,检测在磁场中作切割磁力线运动的金属线上的感生电压,实现磁场测量.首先介绍了传感器的工作原理,并用振动理论对传感器的受力及响应进行了分析,接着用有限元软件建立结构模型并对其振动模态和频率进行了仿真.该MEMS磁场传感器采用标准的CMOS工艺加上后处理来实现.最后...     

深亚微米工艺EEPROM单元加固设计及辐照性能

当普通EEPROM单元在太空中应用时,会受到辐照效应的影响,导致单元可靠性降低,寿命缩短,为此,基于0.18 μm工艺,设计出一种新型抗辐照EEPROM单元.新单元采用环形栅和场区隔离管加固结构.加固后,单元面积为9.56 μm2,抗总剂量效应能力大于1 500 Gy,抗辐照能力明显优于普通结构.为明确失效机制,基于新...     

车用发动机磁流变悬置的刚度优化

由于传统的悬置优化设计一般不考虑发动机载荷以及系统阻尼,不能反映磁流变悬置的半自动控制特性。因此,选取具有代表性的车用直列式4缸4冲程发动机悬置系统的振动力学模型,利用遗传优化算法建立一种磁流变液阻尼器初始刚度优化的新方法。该方法使磁流变液悬置在发动机多种转速下有更优秀的传递率,在冲击载荷下满足安全要求的发动机振动烈度。     

响应面法优化超声波辅助提取红曲米中水溶性色素

研究了红曲米中水溶性色素的超声波辅助提取法的提取工艺.在单因素实验的基础上,采用响应面法研究了超声时间、液料比和超声功率对提取液色价的影响,建立了二次回归模型,得到了提取工艺的最优条件.研究结果表明以上3因素对红曲米中水溶性色素的提取均有显著影响.在提取工艺条件:超声时间为20.6 min,液料比为32.2∶1,超声功率为730 W下提取,红曲米中水溶性色素的色价达到最大值,为570.5 U/g.