Taxumairols X--Z,new taxoids from Taiwanese Taxus mairei

In addition to 19-dydroxybaccatin III, 1beta-hydroxy-5 alpha-deacetylbaccatin I, taxayuntin G and 13-O-deacetyltaxumairol Z (4), three new taxane diterpenoids, taxumairols X (1), Y (2), Z (3) have been isolated from extracts of the Formosan Taxus mairei (LEMEE & LEVL.) S. Y. HU. Compounds 1-2 belong to the 11(15-->1)-abeo-taxane system, having a tetrahydrofuran ring at C-2, C-3, C-4 and C-20. The new compound 3 and 4, which was misidentified previously are derivatives of 11(15-->1)-abeo-taxane with an intact oxirane system. The structures of compounds 1-4 were elucidated on the basis of extensive two dimensional (2D)-NMR analysis.     

Infrared and electronic spectra of copper (II) complex of maleonitriledithiolate and 4,4'-dimethyl-2, 2'-bipyridine and their theoretical studies

The molecular structure and binding, as well as infrared and electronic spectroscopic properties for the title complex Cu(mnt)(dmbpy)(mnt(2-)=maleonitriledithiolate, dmbpy=4,4'-dimethyl-2,2'-bipyridine) were studied in this paper. With semi-empirical PM3 and non-empirical DFT (B3LYP/6-311G*) methods, the molecular geometry of the complex was optimized and corresponding vibrational spectra in the gaseous state were obtained. The calculated results derived from DFT were more reasonable than those from PM3. The point group of Cu(mnt)(dmbpy) in isolated gaseous state was C(2), in which Cu(II) adopted a distorted tetrahedral geometry and the dihedral angle between the N(2)Cu and S(2)Cu planes was about 29.814 degrees. And a complete assignment to the IR spectra of such a complicated molecule was exhibited. With ZINDO/S method an electronic spectrum was calculated. The results showed that the calculated values generally agreed with the observed ones. And a detailed explain was made on its electronic spectra.     

Continuation calculations of boron- (aluminum-, titanium-, and nickel-) doped La13 clusters

In this work, we have calculated boron-, aluminum-, titanium-, and nickel-doped La13 clusters by DMOL method based on the density-functional theory. Two doping modes are employed: surface and center doping. The boron, aluminum, and nickel atoms prefer to occupy the surface sites while the titanium atom prefers to occupy the center site. The doped La13 clusters with these four kinds of atoms have lower binding energy than pure La13 clusters. The icosahedral isomers are of lower binding energy than cubotahedral and decahedral isomers for La12B(-1), La12Al(-1), and La12Ni, while doping makes the cubotahedral La12Ti stable with a binding energy a little lower than icosahedral La12Ti. There are electronic shell effects in icosahedral La12B(-1) and La12Al(-1). The icosahedral La12B(-1) is promising to be formed during the doped process experimentally. Furthermore, we have also discussed the distorted structures of center doping by bond lengths, density of states, and charge transfers.     

An Education in Robustness

A case study is presented of the application of robustness analysis to the choice of examination subjects to be made by a 14-year-old girl. The analysis is conducted in terms of the desirable future career options which may be preserved by different combinations of subjects, and also of the balance with topics selected for their intrinsic interest. The approach, which employs very limited technical apparatus, is justified on a number of grounds-in particular, the crucial importance of uncertainty, and the need for understanding and acceptance by a "client" very unlike the corporate manager. Some tentative conclusions are reached on the extension of such methods to other cases of decision-makers with little, if any, resources to control except their own lives.     

Teaching Operational Research Technique

Good technique, i.e. competence in carrying out operational research, is as vital for the practitioner to acquire as competence in the traditional ‘techniques’. It is suggested that universities should teach students how to conduct simple projects prior to alerting them to more sophisticated methodological issues.As an aid to this task, the traditional five or six parts of an operational research project are broken down and extended into 39 steps, and regrouped into three phases. Also, five skills are identified as being conceptually essential to "good" operational research, which students can develop through tackling suitable case studies.     

STABILITY OF POLY（N,N＇-METHYLENEBISACRYLAMIDE-co-4-VINYLPYRIDINE） MICROGEL DISPERSION AND ADJUSTMENT OF THE HYDROPHOBICITY IN THE MICROGELS

In the UV-Vis spectra of pure light-scattering systems, there is an exponential relationship between absorbance and wavelength （A = Kλ^-n）. Here, the exponent n is named as flocculation-coagulation parameter. In the present paper, the effects of different additives on the stability of poly（N,N＇-methylenebisacrylamide-co-4-vinylpyridine） （poly（Bis-co-4-VP）） microgel dispersion were studied in detail via this parameter. The results showed that the stability of the dispersion mainly comes from the ionization of pyridine groups, making the microgel positively charged on its surface. This was confirmed by the measurement of Zeta potential and the result of conductometric titration. The result of fluorescence analysis indicated that the hydrophobicity in the microgels is enhanced with the increase in total 4-VP unit content.     

Characterization of highly sulfated cyclodextrins

A class of highly sulfated cyclodextrins (HS-CDs) was developed for enantiomeric separation of chiral compounds by capillary electrophoresis (CE). The HS-CDs were produced by a facile single-step direct sulfation of cyclodextrin using sulfur trioxide-trimethylamine complex in dimethylformamide. Characterization of the HS-CDs by electrospray ionization mass spectrometry and by CE using a well-established indirect detection method indicated the species have very narrow heterogeneity in terms of degree of sulfation. Elemental analysis of the HS-alpha-, beta- and gamma-CDs showed that the average sulfate contents were 11, 12, and 13 per CD molecule, respectively. The 13C NMR of HS-CDs is consistent with the structural assignment of nearly complete sulfation at C-6 primary hydroxyl groups and partial sulfation at the C-2 secondary hydroxyls (>70%), while the C-3 hydroxyls remain unsubstituted. Enantiomeric separation by CE using the HS-CDs as chiral selectors showed that HS-alpha-, beta- and gamma-CDs complement each other by exhibiting different chiral selectivities, resulting in resolution of many chiral neutral, acidic and basic compounds of greatly varying structural features. The part of HS-CD that interacts with the guest molecule during complexation and, therefore, the receiving end of the cyclodextrin hydrophobic bucket was surrounded with largely regiospecifically substituted C-2 sulfates and intact C-3 hydroxyls, both at the equatorial positions. Such global regiospecific structural arrangement in HS-CDs provides differential diasteroisomeric complexation is proposed to be the principal contributing factor in the resolving racemates.     

Synthesis, crystal structure and magnetic property of the novel dinuclear nickel(II) complex with 4-(p-methoxyphenyl)-3,5-bis(pyridine-2-yl)-1,2,4-triazole

A novel dinuclear nickel(II) complex, [Ni₂(MOBPT)₂Cl₂(H₂O)₂]Cl₂ · 7H₂O (MOBPT = 4-(p-methoxyphenyl) −3,5-bis(pyridine-2-yl)-1,2,4-triazole), has been synthesized and characterized by elemental analysis, IR and single crystal X-ray diffraction methods. The crystal structure determination shows that the dinuclear Ni₂N₈ unit is almost planer in which each Ni^II ion is coordinated by four nitrogen atoms from MOBPT equatorially and a water molecule and a chloride ion axially in a distorted octahedral geometry. Magnetic measurements reveal a relatively weak antiferromagnetic exchange in the complex.     

Optical properties of ZnO and ZnO:In nanorods assembled by sol-gel method

Self-assembled zinc oxide (ZnO) and indium-doping zinc oxide (ZnO:In) nanorod thin films were synthesized on quartz substrates without catalyst in aqueous solution by sol-gel method. The samples were characterized by x-ray diffraction (XRD), scanning electron microscope (SEM), Raman-scattering spectroscopy, room-temperature photoluminescence (PL) spectra, and temperature-dependent PL spectra measurements. XRD and Raman spectra illustrated that there were no single In2O3 phase in ZnO lattice after indium doping. The PL spectra of ZnO showed a strong UV emission band located at 394 nm and a very weak visible emission associated with deep-level defects. Indium incorporation induced the shift of optical band gap, quenching of the near-band-edge photoluminescence and enhanced LO mode multiphonon resonant Raman scattering in ZnO crystals at different temperatures. Abnormal temperature dependence of UV emission integrated intensity of ZnO and ZnO:In samples is observed. The local state emission peak of ZnO:In samples at 3.37 eV is observed in low-temperature PL spectra. The near-band-edge emission peak at room temperature was a mixture of excitons and impurity-related transitions for both of two samples.     

Ruthenium-catalyzed cyclization of 3-en-1-ynyl imines with nucleophiles via tandem 5-exo-dig cyclization and nucleophilic addition

Treatment of 3-en-1-ynyl imines with TpRuPPh₃(CH₃CN)₂PF₆ catalyst (1 mol %) in DCE (50 °C, 6 h) effected catalytic cyclization with suitable nucleophiles and gave functionalized pyrroles in good yields. The reaction mechanism is proposed to proceed via (2-pyrrolyl)carbenoid intermediates derived from 5-exo-dig cyclization. This catalytic reaction works well with various nucleophiles, including water, alcohols and anilines.