复合生物材料的研究进展

从力学性能的改善和降解速率的可调度等角度,总结了复合生物材料与单一组分的材料相比,在生物医学领域应用中所表现出的综合使用性能的优越性。综述了复合生物材料,特别是用于骨修复的各类有机／无机复合材料近年来的研究进展状况。提出将与人骨中磷灰石微晶类似的羟基磷灰石纳米粒子与可降解聚酯材料进行复合,能够得到具有优越骨诱导性能并且能够降解的新型骨修复材料。这方面的研究代表了有机／无机复合生物材料领域新的发展方向。     

Synthesis,crystal structure and reaction of differentially ring-substituted titanocene dichlorides

Summary A new class of differentially ring-substituted titanocene dichlorides of the type CpCpTiCl₂ has been prepared by reacting CpM (M=Li, K; Cp=RC₅H₄) with CpTiCl₃ (Cp=MeOCH₂CH₂C₅H₄). The crystal structure of Cp(PhCEt₂C₅H₄)TiCl₂, the first example, has been determined by x-ray diffraction and refined to a final R factor of 0.0532 for 2304 reflections. The crystal belongs to the monoclinic space group C _2h ⁵ –P2₁/c with unit cell parameters:a 10.205(6),b 13.003(5),c 17.591(9) Å, 101.91(4)°, V=2284 ų, Z=4 and Dc=1.32 g/cm^–3. Replacement of one neomenthyl in bis(neomenthyl-cyclopentadienyl)titanium dichloride by one MeOCH₂CH₂ — raises the e.e. value from 5.8% to 11.2% in the catalytic asymmetric hydrogenation of 2-phenyl-1-butene.     

链段相容性对聚酯-聚醚多嵌段共聚物组成均一性的影响

<正> 由结晶型芳族聚酯为硬链段,无定型脂肪族聚醚为软链段的聚酯-聚醚多嵌段共聚物,是一类性能优良的热塑弹性体,本文研究链段相容性对这类聚合物组成均一性的影响,因此,合成了一系列不同链段结构的聚酯-聚醚多嵌段共聚物。 如硬链为聚对苯二甲酸乙二醇酯(PET)和丁二醇酯(PBT);软链段有聚乙二醇醚(PET)、聚丁二醇醚(PTMG)、聚二醇醚(PPG)和四氢呋喃同环氧丙烷的共聚醚二醇     

Exact electronic properties in the classically forbidden region of a metal surface

We derive exact properties of the inhomogeneous electron gas in the asymptotic classically forbidden region at a metal–vacuum interface within the framework of local effective potential energy theory. We derive a new expression for the asymptotic structure of the Kohn–Sham density functional theory (KS‐DFT) exchange‐correlation potential energy v_xc(r) in terms of the irreducible electron self‐energy. We also derive the exact asymptotic structure of the orbitals, density, the Dirac density matrix, the kinetic energy density, and KS exchange energy density. We further obtain the exact expression for the Fermi hole and demonstrate its structure in this asymptotic limit. The exchange‐correlation potential energy is derived to be v_xc(z → ∞) = ?α_KS,xc/z, and its exchange and correlation components to be v_x(z → ∞) = ?α_KS,x/z and v_c(z → ∞) = ?α_KS,c/z, respectively. The analytical expressions for the coefficients α_KS,xc and α_KS,x show them to be dependent on the bulk‐metal Wigner–Seitz radius and the barrier height at the surface. The coefficient α_KS,c = 1/4 is determined in the plasmon‐pole approximation and is independent of these metal parameters. Thus, the asymptotic structure of v_xc(z) in the vacuum region is image‐potential‐like but not the commonly accepted one of ?1/4z. Furthermore, this structure depends on the properties of the metal. Additionally, an analysis of these results via quantal density functional theory (Q‐DFT) shows that both the Pauli W_x(z → ∞) and lowest‐order correlation‐kinetic W(z → ∞) components of the exchange potential energy v_x(z → ∞), and the Coulomb W_c(z → ∞) and higher‐order correlation‐kinetic components of the correlation potential energy v_c(z → ∞), all contribute terms of O(1/z) to the structure. Hence correlations attributable to the Pauli exclusion principle, Coulomb repulsion, and correlation‐kinetic effects all contribute to the asymptotic structure of the effective potential energy at a metal surface. The relevance of the results derived to the theory of image states and to KS‐DFT is also discussed. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

纳米TiO2膜用于光催化氧化测定化学需氧量的研究

A photocatalytic oxidation method for determination of chemical oxygen demand （COD） using nano-TiO2 film, based on the use of a nano-TiO2-Ce（SO4）2 system and electrochemical detection, was proposed. The technique was originated from the direct determination of the Ce（Ⅲ） concentration change resulting from photocatalytic oxidation of organic compounds. Ce（Ⅲ）, which was produced by photocatalytic reduction of Ce（SO4）2, could be measured at a multi-walled carbon nanotubes （MWNT） chemically modified electrode （CME）. The COD values by this method were calculated from the differential pulse voltammetry （DPV） current of Ce（Ⅲ） at the CME. Under the optimal operation conditions, the detection limit of 0.5 mg·L^-1 COD with the linear range of 1-600 mg·L^-1 was achieved. This method was also applied to determination of various COD of ground water and wastewater samples. The resuits were in good agreement with those from the conventional COD methods, i.e., permanganate and dichromate ones.     

The Pharmacophore Hypothesis of Novel Inhibitors for Aurora A Kinase

A three-dimensional pharmacophore model was developed from a series of inhibitors of Aurora A kinase to discover new potent anti-cancer agents using the HypoGen module in the Catalyst software. The pharmacophore model was developed based on the structure of 20 currently available inhibitors, which were carefully selected from the literature. The best hypothesis （Hypo 1） was defined by four features： one hydrogen-bond donor and three hy- drophobic points, with the best correlation coefficient of 0.909, the lowest rms deviation of 1.563, and the highest cost difference of 99.075. The Hypo 1 was then validated by a test set consisting of 24 compounds and by a cross-validation of 95% confidence level through randomizing the data using the CatScramble program, which suggested that a predictive pharmacophore model had been successfully obtained.     

n—InP在Fe^3＋／Fe^2＋溶液中光脉冲暂态行为（Ⅳ）

研究了波长、温度及表面处理对ｎ－ＩｎＰ光脉冲暂态行为的影响。结果表明，波长对时间常数无影响；随着温度升高，峰值下降，衰减变快。讨论了表面处理的影响，并对实验结果作了必要的解释。     

醋酸烯丙酯选择性地合成烯丙基硒醚

醋酸烯丙酯被Pd(PPh3)4-SmI2还原，并发生中间体π-烯丙基钯络合物的极性 反转，而后与芳基硒溴化物作用，生成烯丙基硒醚．     

Syntheses and characterizations of three-dimensional channel-like polymeric lanthanide complexes constructed by 1,2,4,5-benzenetetracarboxylic acid

The hydrothermal reaction of YbCl(3) small middle dot6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride resulted in [[Yb((b)btec)(1/4)((d)btec)(3/6)(H(2)O)(2)](4).6H(2)O](n)() (1) (H(4)btec = 1,2,4,5-benzenetetracarboxylic acid), and the solvothermal reaction of Er(NO(3))(3) small middle dot6H(2)O or TbCl(3).6H(2)O with 1,2,4,5-benzenetetracarboxylic dianhydride in H(2)O/acetic acid gave rise to [[Er(2)((c)btec)(2/4)((e)btec)(2/4)((f)btec)(2/4)(H(2)O)(4)].4H(2)O](n)() (2) and [[Tb(H(2)btec)(2/4)((f)btec)(3/6)(H(2)O)].2H(2)O](n)() (3), respectively. Complex 1 crystallizes in monoclinic space group C2/m with a = 20.8119(5) A, b = 17.6174(1) A, c = 5.7252(2) A, beta = 92.324(1) degrees, and Z = 1. 1 possesses a three-dimensional framework consisting of eight-coordinate ytterbium centers and two kinds of channels along the c axis. Complex 2 crystallizes in triclinic space group P with a = 9.6739(5) A, b = 11.0039(5) A, c = 11.5523 A, alpha = 104.8330(10) degrees, beta = 91.0000(10) degrees, gamma = 114.2570(10) degrees, and Z = 2. 2 has a three-dimensional framework comprising both eight- and nine-coordinate erbium centers and channels along the a axis. Complex 3 crystallizes in monoclinic space group P2(1)/n with a = 10.7246(12) A, b = 7.1693(9) A, c = 17.158(2) A, beta = 97.109(2) degrees, and Z = 4. 3 shows a three-dimensional framework containing nine-coordinate terbium centers and channels along the b axis. Uncoordinated water molecules occupy the channels in the three complexes. TGA and XRPD were determined for the three complexes, and the results illustrate that the framework of 1 is retained upon removal of uncoordinated and coordinated water molecules.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).