从静态应力松弛实验求材料准松弛时间谱的一种数值计算方法

避开繁琐困难的函数求解过程，采用数值计算方法，从常规的静态应力松弛实验，直接求被测材料的松弛单元的表现松弛强度．主松弛时间τ０由单－ＭＡＸＷＥＬＬ模型求得，其他松弛时间分别约取为１０（－２）·τ０，１０（－１）·τ０，１０１·τ０，１０３·τ０。应力松弛万程取５参数模型，记为谱的强度ａｉ（或Ａｉ）通过多元线性回归，由最小二乘法确定．对一种天然橡胶试样在不同温度下的松弛曲线进行处理，回归值与原始实验值吻合良好，不同温度下的松弛单元对总松弛的贡献，反映出温度对松弛过程的活化作用．     

四川地区宫颈癌组织HPV18和HPV45 E6基因突变分析

采用聚合酶链反应技术对四川地区2003~2004年收集的60例宫颈癌患者的癌组织DNA进行人乳头瘤病毒(HPV) E6基因扩增, 获得HPV18和45型E6基因. 序列分析发现, 18型三例E6基因有同样的两处同义突变; 45型两例E6基因发生突变, 一例有两处碱基突变, 另一例发生六处碱基突变, 其中两处涉及氨基酸变化, 均位于E6抗原决定簇区. HPV45型E6基因中134位c→t, 157位c→t, 259位g→t和341位t→c的碱基点突变未见报道. 另外， 该地区HPV18和45型突变株之间存在碱基互变,  它们之间的最小差异比野生型HPV18和HPV45之间的差异小4.05%, 该数值比在非洲发现的突变株的要小很多, 该结果支持HPV18和HPV45可能起源于非洲的观点.     

金属四重键化合物M2X4（PMe3）4（M=Cr，Mo，W;X=F，CI，Br，I）结构和电子光谱的密度泛函理论研究

采用密度泛函理论方法，在TZ2P-STO基组水平下，对金属四重键化合物M2Cl4（PMe3）4（M=Cr，Mo，W）和Mo2X4（PMe3）4（X=F，Cl，Br，I）的几何结构进行优化，分析了电子结构，并运用TDDFT方法对其低占据激发态进行了计算．考虑相对论效应的ZORA方法能够较好地重现M2X4（PMe3）4的几何结构．M2X4（PMe3）4的电子结构分析表明其d电子的组态为σ^2π^4δ^2，前线轨道能级顺序为πlig〈πd／σd〈δd〈δd^＊．金属原子和卤素配体的改变虽然使轨道能量发生变化，但没有影响轨道的排布顺序．TDDFT方法对M2Xa（PMe3）4δd→δd^＊和π→δd^＊跃迁能量的计算较为准确，对πlig→δd^＊（LMCT）跃迁能量的计算误差较大．金属原子、卤素配体以及相对论效应对激发能的影响可以根据分子轨道能级的变化给予解释．     

BaCe0.8Ho0.2O3-a陶瓷的性质与应用

Ceramic BaCe0.8Ho0.2O3-α with orthorhombic perovskite structure was prepared by conventional solid state reaction, and its conductivity and ionic transport number were measured by ac impedance spectroscopy and gas concentration cell methods in the temperature range of 600-1000 ℃ in wet hydrogen and wet air, respectively. Using the ceramics as solid electrolyte and porous platinum as electrodes, the hydrogen-air fuel cell was constructed, and the cell performance at temperature from 600-1000 ℃ was examined. The results indicate that the specimen was a pure protonic conductor with the protonic transport number of 1 at temperature from 600-900 ℃ in wet hydrogen, a mixed conductor of proton and electron with the protonic transport number of 0.99 at 1000 ℃. The electronic conduction could be neglected in this case, thus the total conductivity in wet hydrogen was approximately regarded as protonic conductivity. In wet air, the specimen was a mixed conductor of proton, oxide ion and electron hole. The protonic transport numbers were 0.01-0.09, and the oxide-ionic transport numbers were 0.27-0.32. The oxide ionic conductivity was increased with the increase of temperature, but the protonic conductivity displayed a maximum at 900 ℃, due to the combined increase in mobility and depletion of the carriers. The fuel cell could work stably. At 1000 ℃, the maximum short-circuit current density and power output density were 346 mA/cm^2 and 80 mW/cm^2, respectively.     

Study on thermal stability of poled non-linear optical polymers

A logarithmic expression is proposed to describe relaxation of the polar order in side chain polymers,together with a new way of plotting temperature dependent relaxation data.This results in a straight line extending even below the glass transition temperature in the case of poled nonlinear optics (NLO) side chain polymers.A simple procedure to determine the rotational diffusion constant Dr is given and Dr values of several polymer systems have been evaluated and compared with each other.It appears that,starting from the conventional and well known poled polymer system currently applied,a further lowering of Dr by about 3 orders of magnitude is necessary in order to reach an acceptable orientational stability or lifetime of poled polymers for practical applications.Attempts have been made to introduce electron push-pull substituents into high thermostable molecular frameworks and results of preliminary measurements are reported.     

基于新型轴对称无网格方法的水下爆炸冲击波和气泡运动数值模拟

采用无网格光滑粒子流体动力学（smooth particle hydrodynamics,SPH）方法,结合粒子体积自适应技术（volume adaptive scheme, VAS）构建高精度、高效率的新型轴对称SPH模型,实现水下爆炸冲击波和气泡运动模拟。在冲击波传播阶段,通过与经验公式及文献理论值对比,验证了该轴对称SPH模型的精度。针对气泡脉动模拟,选取典型的双气泡耦合问题,分析气泡形态和压力载荷的力学特性,讨论了两气泡之间的距离参数对气泡相互作用过程的影响。结果表明,该新型轴对称SPH模型可实现水下爆炸过程压力载荷和气泡形态演化的精确预报。     

小型化折叠型RFID抗金属标签天线的设计

设计一种小型化折叠型超高频射频识别标签天线.天线由开槽的辐射贴片、 4个感性短接面和两片金属接地板组成.通过改变短接面尺寸及右侧短接面与接地面的距离,可以有效地调谐标签天线的谐振频率及其阻抗,总尺寸(L×W×h)为40 mm×40 mm×1.5 mm.实验结果表明：标签天线阻抗匹配良好,|S₁₁|＜﹣10dB带宽为880～930 MHz.将标签天线放置于200 mm×200 mm的金属板上,4 W有效全向辐射功率条件下的最大实测阅读距离可达到11.2 m.该标签天线通过适当的开槽实现小型化,同时具有抗金属、识别距离远等优点,可较好地应用于工业物联网相关测量领域中.     

基于TSV的3D IC层次化物理实现技术

随着集成电路特征尺寸逼近物理极限,硅通孔（TSV）实现层间互连的三维集成电路（3D IC）成为延续摩尔定律的一种趋势.但现有集成电路设计工具、工艺库、设计方法尚不成熟,难以实现三维集成中超大尺寸基板芯片的时序收敛问题.为此,本文提出了一种利用现有传统的EDA工具完成基于TSV的3D IC物理设计的流程.首先,用热应力模型将三维硅通孔投影成二维阻挡层,从而将三维集成电路设计转化成若干含阻挡层的二维集成电路分别实现;其次,针对超大尺寸基板芯片的时序收敛困难问题,提出了一种标准单元布局方法,通过在版图中划定若干固定放置区用于限定关键时序单元的摆放,并迭代确定这些关键单元在固定放置区中的位置,实现大尺寸芯片的时序收敛.基于所提出的三维集成电路设计流程完成了一款三维集成的网络路由芯片基板芯片的设计,结果表明,相比传统的设计流程,提出的3D IC物理设计流程可使超大尺寸基板芯片从时序无法收敛优化到可收敛并满足时序要求,验证了所提出的3D IC物理设计流程的可行性.     

耐碳青霉烯酶肺炎克雷伯菌的分离鉴定及生物学特性分析

以临床尿路感染患者尿液为研究对象,通过分离培养及16s rDNA进行肺炎克雷伯菌的分离鉴定;采用Kirby-Bauer纸片法进行药敏实验,并对分离株进行碳青霉烯酶表型筛选;通过PCR检测常见的碳青霉烯酶耐药基因、荚膜血清型和毒力基因分布情况;对分离的肺炎克雷伯菌株进行了生物被膜形成能力及其对小鼠致病力的分析。本研究从采取的86例尿液标本中分离检出11株耐碳青霉烯酶肺炎克雷伯菌,分离率为12.79%。耐碳青霉烯酶基因PCR检测结果显示,blaNDM、blaVIM、blaIMP和blaKPC基因在分离株中均呈现不同程度的分布。耐药性分析发现11株肺炎克雷伯菌对氨苄西林耐药率为90.91%,对头孢噻肟耐药率为63.64%,对链霉素、庆大霉素、氯霉素和诺氟沙星的耐药率较低。耐碳青霉烯类肺炎克雷伯菌荚膜分型结果显示,分离的11株细菌中10株均为强毒力型菌株（90.9%）,其中K57血清型4株（36.4%）,K1血清型1株（9.1%）,K2血清型1株（9.1%）,K5血清型1株（9.1%）,K20血清型3株（27.3%）,提示该批分离株具有较强的致病力。此外,毒力因子分布结果显示,其毒力因子rmpA（54.5%）、Aerobactin F（54.5%）在菌株中分布较为广泛。生物被膜形成能力检测及小鼠致病性试验结果显示,9株分离株均有较强的生物被膜形成能力,菌株致病力可能与荚膜血清型及生物被膜形成能力相关。综上所述,临床分离的致尿路感染病原肺炎克雷伯菌呈现多重耐药特征,强毒力菌株以K57荚膜型为主,K1、K2均有分布,提示对尿路感染病原应加强耐药监测,合理使用抗菌药物,有效防控多重耐药和强毒力菌株的感染与流行。     

Isolation, Mapping, DNA Sequence and RFLPs Studies of Random Single-Copy DNA Segments on Human X Chromosome

Using the total human/mouse DNA as the probe, screening has been carried out three times with in situ plaque hybridization to obtain the single-copy DNA sequence from the human X chromosome genomic library. The effective rate of screening is 1. 45%. DNAs from clones containing single-copy inserts have been analyzed by a panel of hybrid cells with or without human X chromosome. Three segments, designated by DXFD52,73,75, are mapped to the X chromosome. DXFD52 has been precisely localized on Xq12-q13 with in situ chromosomal hybridization. DXFD52 has been partially sequenced. The results indicate that DXFD52 is a new isolated single-copy segment on the X chromosome. Great progress in the RFLPs study with DXFD52 has been achieved in the population of Chongqing, Sichuan Province. The results show that the DXFD52 can be used to detect the RFLP with Hind Ⅲ, Bgl Ⅱ, and Hinf Ⅰ. DXFD52 will be a potential "landmark" for the construction of the complete linkage map of human genome and the analysis of genomic s