中国六种管巢蛛记述（蜘蛛目：管巢蛛科）

本文记述我国管巢蛛6种,即白马管巢蛛Clubiona baimaensis sp. nov.、朝鲜管巢蛛C. corena Paik 金氏管巢蛛C. kimyongkii Paik、琴形管巢蛛C. lyriformis sp. nov.、臼齿管巢蛛C. moralis sp. nov.和江原管巢蛛C. wolchongsensis Paik。其中3种为新种,3种为我国新纪录。文中并提出,乌苏里管巢蛛C. ussurica Michailov(♀)可能与金氏管巢蛛(♂)为同种,因而乌苏里管巢蛛的拉丁字名应为后一种的同物异名。     

磁场中载流线圈力和力矩的公式

本文给出计算载流线圈在外磁场中所受力和力矩的普遍公式.     

基于线性耦合下混沌系统的同步条件

将混沌同步问题用精确的数学语言给予描述，通过数学分析将其转化为微分方程组的稳定性问题.以Lorenz系统族的Chen氏系统作为典型系统，在线性耦合下分析系统参数，得到了系统达到同步时的充分条件，且在理论上加以证明.结合该条件，提出了一种确定耦合系数的方法.最后用仿真实验验证了该方法的正确性，并验证了在不同耦合方式和参考系统的情况下定理的有效性. 关键词： 混沌同步 耦合 稳定性     

复杂机械系统实用故障诊断原则的研究

在总结现有诊断技术成功应用实例的基础上,提出了一种新的实用诊断原则-“最少试验故障模”原则,对于复杂的机械设备和系统,采用这种新的研究思路有利于降低研究难度,提高研究成果的实用性.还以滑动轴承为例,通过对滑动轴承主要失效形式和机理的分析,说明可将滑动轴承简化为-多输入（多种故障原因）-单输出（接触摩擦）的灰色系统模型,并以滑动轴承各种故障的共同特征-接触摩擦作为滑动轴承故障诊断研究的唯一故障基准模.根据上述研究思路,对静、动载荷工作条件下滑动轴承的故障诊断进行了大量的实验研究.实践表明,提出的诊断原则诊断效率高,实用性强,可借鉴用于许多领域的故障诊断.     

具有非常数回报率的证券指数跟踪问题的简单脉冲控制

运用随机脉冲控制理论讨论了均值 -方差模式的现金管理指数跟踪问题 ,在回报率随现金比重变化的情况下 ,讨论了证券指数跟踪最优化问题 ,得出了存在简单脉冲控制策略的充分性条件 .     

Correct Evaluation of the Effect of Transverse Effective Charges on Phonons in AlAs Quantum Dots

An improved valence force field model (VFFM) is suggested to calculate the phonon modes in both bulk specimens and quantum dots (QDs) of AlAs taking account of the effect of transverse effective charges (TCs) correctly.The resultant dispersions of AlAs bulk phonons are in accord better with the results carefully fitted to the experimental data by using 11-parameters rigid-ion model, than those got by ordinary VFFM, especially in the region of near F point. For AlAs QDs, TCs are evaluated bond by bond for each phonon mode of QD and its effect on the change of the force on atoms is taken into account to modify further the phonon spectrum. The frequency spectra and densities of phonon states of different irreducible representations calculated by using improved VFFM are compared with the results of ordinary VFFM. The correct evaluation of the TCs is not only important in calculating the phonon spectrum of both bulk and QD specimens accurately, but is also in the further discussion of the electron-phonon (e-ph) interaction, which can be directly related to TCs of ions in QD.     

On the Exceptional Zeros of Rankin–Selberg L-Functions

The main objects of study in this article are two classes of Rankin–Selberg L-functions, namely L(s,f×g) and L(s, sym²(g)× sym²(g)), where f,g are newforms, holomorphic or of Maass type, on the upper half plane, and sym²(g) denotes the symmetric square lift of g to GL(3). We prove that in general, i.e., when these L-functions are not divisible by L-functions of quadratic characters (such divisibility happening rarely), they do not admit any LandauSiegel zeros. Such zeros, which are real and close to s=1, are highly mysterious and are not expected to occur. There are corollaries of our result, one of them being a strong lower bound for special value at s=1, which is of interest both geometrically and analytically. One also gets this way a good bound onthe norm of sym²(g).     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

Synthesis and luminescence characteristics of conjugated dendrimers with 2,4,6‐triaryl‐1,3,5‐triazine periphery

We have synthesized conjugated dendrimer with triazine peripheries, and their luminescence properties were investigated. The dendrimers consist of dendritic triazine wedges for electron transport, distyrylbenzene core as an emitting moiety, and t‐butyl peripheral groups for good processing properties. The dendrimers have LUMO values of about ?2.7 eV possibly because of the triazine moiety with high electron affinity. Photoluminescence study indicates that energy transfer occurs from the triazine wedges to the stilbene bridge, and finally to the core chromophore units due to a cascade decrease of bandgap from the peripheral wedge to core moiety. Therefore, the emission wavelength was determined by the structure of the core unit. The energy transfer efficiency of distyrylbenzene‐cored dendrimers was about 75 and 55% for Trz‐1GD‐DSB and Trz‐2GD‐DSB, respectively. A preliminary electroluminescence property also was investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 254–263, 2006