一个由4,4′-(丁烷-1,4-二氧基)-二苯甲酸和双咪唑配体构筑的三重穿插金属有机骨架化合物(英文)

采用水热法合成了1个二维缠结金属有机框架化合物[Cu(bbi)0.5(boba)]n(1)(bbi=1,1′-(1,4-丁烷基)-二(咪唑);H2boba=4,4′-(丁烷-1,4-二氧基)-二苯甲酸),并通过元素分析、红外光谱和单晶X-射线衍射对其进行了结构表征。结构分析显示:化合物1是具有聚轮烷和聚锁烃结构特征的三重平行穿插网络。此外还研究了它的荧光和热稳定性。     

聚乙烯吡咯烷酮对Pt/Ru双金属纳米簇的结构和催化性能影响

以乙二醇为还原剂,通过微波热辐射制备得到稳定的Pt/Ru双金属胶体纳米簇,各颗粒粒径在1~2 nm范围。考察了聚合物聚乙烯吡咯烷酮(PVP)对Pt/Ru双金属纳米簇表面原子组成及催化性能的影响。结果表明,PVP与金属前体之间的不同相互作用影响Pt/Ru双金属纳米簇的形成。在Pt/Ru双金属纳米簇形成之前加入PVP,Pt原子更容易富集在双金属表面,有利于增加Pt在催化反应中的作用。在PVP稳定的Pt/Ru双金属纳米簇中,除了零价态的Pt、Ru单质外,还存在氧化态的Pt化合物,归因于PVP与Pt前体的相互作用。在环己烯加氢反应中,PVP-Pt/Ru双金属纳米簇显示出比单金属纳米簇更优越的催化性能。     

纳米金催化鲁米诺化学发光体系测定甲巯咪唑

在碱性介质中,甲巯咪唑能强烈增敏纳米金-鲁米诺-硝酸银化学发光体系产生较强的化学发光信号,据此建立了一种流动注射化学发光测定甲巯咪唑的新方法。在优化实验条件下,该方法对甲巯咪唑的检测线性范围为1.0×10-9~1.0×10-8、1.0×10-8~1.0×10-7、1.0×10-7~1.0×10-6g/mL,检出限(S/N=3)为3.0×10-10g/mL,相对标准偏差为1.2%(n=11,ρ=1.0×10-8g/mL)。将该法用于药物中甲巯咪唑含量的测定,结果满意。同时,采用化学发光光谱表征技术对该体系的化学发光反应机理进行了初步探讨。     

新型生物相容性大分子磁共振成像造影剂的性质研究

将天冬氨酸与亮氨酸反应,合成了天冬氨酸-亮氨酸共聚物(PL),通过乙二胺将钆-1,4,7,10-四氮杂环十二烷-1,4,7,10-四乙酸(Gd-DOTA)连接到PL上,制备了大分子磁共振成像造影剂PL-A2-DOTA-Gd,通过核磁碳谱、凝胶色谱等方法对其结构进行了表征,利用细胞毒性实验、溶血性实验、体外弛豫效率测定以及体内动物磁共振成像等方法对其性能进行了评估。研究表明,PL-A2-DOTA-Gd的细胞毒性远低于临床应用的造影剂Gd-DOTA,且其弛豫效率(15.3 L/(mmol·s))是Gd-DOTA(5.8 L/(mmol·s))的2.6倍。大分子磁共振成像造影剂PL-A2-DOTA-Gd具有良好的血液相容性,对昆明小鼠的肝脏信号的增强效果约为Gd-DOTA的3.1倍,且能在较长时间内保持良好稳定的增强效果。     

Parity Alternation of Silicon-doped Ternary Cationic Clusters HC_nSi_2~+(n=1～9)

Systematic study on the electronic/geometrical structures and the parity alternation effect of silicon-doped ternary cationic clusters HCnSi2＋（n = 1 ~9） have been carried out at the coupled cluster level. The ground-state （G-S） isomers of the clusters have been defined. The C, chains of the G-S isomers display polyacetylene-like structures. The even-n cations are more stable than the odd-n ones. Such a trend of even/odd alternation has been elaborated based on concepts of the bond character, atomic charge, incremental binding energy, ionization potential, proton affinity and fragmentation energies of the systems. The findings accord with the relative intensities of HC,,Si2＋ species recorded in the related mass spectrometric experiments.     

A 3-fold Interpenetrated lvt Cd(Ⅱ) Network Constructed from 4-[(3-pyridyl)methylamino]benzoate Acid

A new three-dimensional(3D) coordination polymer, [Cd(L)2H2O]n·5nH2O 1 with 4-[(3-pyridyl)methylamino]benzoate acid(HL), has been synthesized by slow evaporation solvent at room temperature, and structurally characterized by elemental analysis, IR spectrum, thermal analysis, fluorescence spectrum and single-crystal X-ray diffraction. Compound 1 crystallizes in the tetragonal system, space group I-4, with a = 20.7937(16), c = 13.515(2), V = 5843.5(11) 3, C26H34CdN4O10, Mr = 674.97, Dc = 1.534 g/cm3, μ(MoKα) = 0.808 mm-1, F(000) = 2768, Z = 8, the final R = 0.0276 and wR = 0.0691 for 5323 observed reflections(I 2σ(I)). The result of thermal analysis shows that 1 is stable under 290 ℃. Moreover, it exhibits blue photoluminescence at room temperature.     

阴离子交换树脂分离同位素稀释等离子体质谱法快速测定地质样品中的铼

建立了适合大批量低含量Re地质样品的测定方法,0.2 g样品通过HF,HNO3分解后在2 mol/L的HCl介质中用阴离子交换树脂进行振荡吸附,然后用HNO3(1+1)解脱,同位素稀释等离子体质谱法测定。     

黄体酮纳米胶束构建及体外释放行为

为了制备可缓释释放的黄体酮纳米胶束新剂型,构建了两嵌段聚合物载体聚乙二醇-聚丙烯基缩水甘油醚(PEG-PAGE),组装成胶束,对黄体酮担载,考察不同条件下的载药量和包封率,筛选出最佳比例,并进行体外释放研究。 结果表明,该胶束能够担载黄体酮,载药量为4.26%,包封率为21.30%,48 h内累计释放达61.31%,能够有效地延缓黄体酮的释放,为黄体酮纳米剂型的开发提供了实验和技术参考。     

电感耦合等离子体质谱法测定金银花中6种有毒元素

建立电感耦合等离子体质谱法同时测定金银花中铅、镉、铬、镍、铜、砷6种有毒元素含量。采用微波消解法进行前处理,以钪、铟、铋3种元素作为内标物,用电感耦合等离子体质谱法对50批金银花样品中铅、镉、铬、镍、铜、砷6种有毒元素含量进行测定,以内标法定量,并应用SPSS软件对测定值进行统计学分析。6种有毒元素的质量浓度在0~300μg/L范围内线性良好,相关系数均不小于0.9997。6种有毒元素的检出限为0.003~0.020 mg/kg,样品加标回收率为80.0%~111.0%,相对标准偏差为0.71%~3.82%(n=6)。50批金银花样品中共计有14批样品有毒元素含量超出2015年版《中华人民共和国药典》规定,超标率为28%。聚类分析将50批样品分为3大类。该方法操作简单,灵敏度高,专属性好,可准确快速地同时测定金银花中多种有毒元素含量,可作为中药材品质及安全性监管的技术手段。     

Tuning the mechanical properties and degradation properties of polydioxanone isothermal annealing

Polydioxanone (PPDO) is synthesized by ring-opening polymerization of p-dioxanone, using stannous octoate as the catalyst. The polarized optical micrograph (POM) shows thes pherulite growth rate of PPDO decreases with an increase in the isothermal crystallization temperature. PPDO is compression-molded into bars, and PPDO bars are subjected to isothermal annealing at a range of temperatures (Ta = 50, 60, 70, 80, 90, and 100 °C), and correspond to three different annealing times (ta = 1h, 2h, 3h). The effect on PPDO is investigated by using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM). With an increase in Ta and ta, the grain size and the degree of crystallinity also increase. Meanwhile, the tensile strength is significantly improved. The PPDO bars (90 °C, 2 h) reach the maximum crystallinity (57.21%) and the maximum tensile strength (41.1 MPa). Interestingly, the heat treatment process does not result in serious thermal degradation. It is observed that the hydrolytic degradation of the annealed PPDO is delayed to some extent. Thus, annealed PPDO might have potential applications, particularly in the fields of orthopedic fixation and tissue engineering.