γ—Mo2N合成过程中的热变化及中间产物的研究

采用ＤＴＡ技术，通过改变升温速率研究了γ－Ｍｏ２Ｎ合成过程中的热变化，并经ＸＲＤ，ＢＥＴ及ＩＲ测试，对ＤＴＡ曲线中的谱峰进行归属，考察了中间产物，ＤＴＡ结果表明，在ＭｏＯ３和ＮＨ３程序升温反应过程中有放热峰及吸热峰出现，且随升温速率的长高，放热峰面积与吸热峰面积之比逐渐减小，结合ＸＲＤ及ＩＲ结果可知，ＤＴＡ曲线听放热峰可归属为由ＭｏＯ３变化为ＭｏＯ２的还原峰，吸热峰则归属为由ＭｏＯ２变化为Ｍｏ２Ｎ     

DFT study of the conductance of molecular wire:The effect of coupling geometry and intermolecular interaction on the transport properties

The density functional theory (DFT) combining with the non-equilibrium Green functions (NEGF) method is applied to the study of the electronic transport properties for a Di-thiol-benzene (DTB) molecule coupled to two Au(111) surfaces. The dependence of the transport properties on the bias, the coupling geometry of the molecule-electrode interface, and the intermolecular interaction are examined in detail. The results show that the existence of the hydrogen atom at the end of the DTB molecule would significantly decrease the transmission coefficients, and then the differential conductance (dI/dV). By changing the position of the DTB molecule located between two electrodes a maximum value of calculated current is observed. It is also found that the intermolecular interaction will strongly influence the transport properties of the system studied.     

Preparation of Europium Induced Conformation—specific anti—calmodulin Monoclonal Antibody

Monoclonal antibody technique was employed to detect the conformational difference of CaM induced by metal ions. A trivalent europium ion induced conformation-specific anti-calmodulin monoclonal antibody was successfully prepared with europium-saturated calmodulin as antigen.     

PHBV/HA骨修复材料的研究

利用硝酸钙与磷酸钠的水溶液制备羟基磷灰石(HA)，同时在HA生成过程中与聚羟基丁酸一戊酸酯(PHBV)复合，探索了HA增强PHBV使之适于作为骨修复材料的一种新途径。结果表明，HA的均匀分散增进了复合材料中两相问的相互结合，能明显地提高复合材料的力学性能。     

球形α-Fe2O3纳米粉体的超声水解法合成与表征

0引言纳米Fe2O3因在磁性、气敏、催化、染料、抗腐蚀等领域显示出广阔的应用前景而备受瞩目[1￣3]。Fe2O3存在α-Fe2O3、β-Fe2O3、γ-Fe2O3、ε-Fe2O3等多种构型,它们在性能上差异较大,如α-Fe2O3具有良好的磁性和气敏性,可用作气敏材料和磁记录材料;γ-Fe2O3具有独特的电、磁、光等性质而在信息存贮器、彩色显像管、生物处理、磁制冷等方面得到广泛应用。由于其各种应用都与性能有直接关系,所以研究Fe2O3的制备方法具有重要意义。尽管不少学者采用溶胶-凝胶法[4]、电化学合成法[5]、微波辐射法[6]、燃烧合成法[7]、水热法等[8]不…     

Three New Anthraquinones from Polygonum cillinerve

Three new anthraquinones, emodin-8-β-D-（2＂-O-coumarate）glucoside 1, emodin-8-β-D-（6＇-O-acetyl）glucoside 2 and physicon-8-β-D-（6＇-O-acetyl）glucoside 3, were isolated from the roots of Polygonum cillinerve and their structures were established by spectroscopic methods. The biological activity indicated that compound 1 had the scavenging activity on 1,1-diphenyl-2-picrylhydrazyl （DPPH） radicals （the IC50 = 8.5 μmol/L）, and compound 1-3 showed no activities against HL-60 and BCJC-823 cells by MTT method in vitro.     

一种新型锂离子电池用聚合物电解质复合膜的制备和性能表征

阐述了一种新型锂离子电池用PVDF-HFP(聚偏氟乙烯-六氟丙烯聚合物树脂)基聚合物电解质复合膜的制备过程. 对复合膜中使用的无机TiO2纳米颗粒进行固体超强酸化处理, 并进行颗粒表面酸强度H0测试、XRD晶体结构分析以及复合膜的电解液吸附率测试和电化学阻抗谱测试. 采用PE无纺布支撑体作为增强材料, 以浸涂方法制备复合膜,并进一步组装为锂离子电池, 性能测试表明该电池具有良好的电化学性能.     

2A12-T6铝合金表面双-(γ-三乙氧基硅丙基)四硫化物薄膜的特性

采用傅立叶变换红外光谱分析了2A12-T6铝合金表面自组装双-(!-三乙氧基硅丙基)四硫化物硅烷偶联剂(SCA)薄膜结构特征,并采用电化学极化曲线评价了薄膜的耐蚀性能.结果表明,铝材表面自然晾干,SCA薄膜分子之间主要通过氢键连接,腐蚀电流密度减小1个数量级以上.120℃的加热处理促进铝板表面通过SiOSi链接而形成SCA网状薄膜结构,并通过在界面上形成SiOAl界面相结构而与铝板表面牢固连接,腐蚀电流密度降低2个数量级以上.SCA乙醇溶液浸泡处理10min比浸泡2s～1min的铝板表面SCA薄膜内氢键缔合羟基要多.     

Synthesis，X－ray Structure and Spectral Propertiesofa Tetra－component Heteropoly Compound

Ｓｙｎｔｈｅｓｉｓ，Ｘ－ｒａｙＳｔｒｕｃｔｕｒｅａｎｄＳｐｅｃｔｒａｌＰｒｏｐｅｒｔｉｅｓｏｆａＴｅｔｒａ－ｃｏｍｐｏｎｅｎｔＨｅｔｅｒｏｐｏｌｙＣｏｍｐｏｕｎｄＺＨＡＮＧＨｅｎｇ－ｂｉｎ，ＹＡＮＧＧｕａｎｇ－ｄｉ，ＱＩＸｉｎｇ－ｙｉａｎｄＬＩＳｈｕ...     

VOCl_3/Et_3Al_2Cl_3/CCl_4溶剂体系催化乙烯丙烯共聚

本文以VOCl_3/Et_3Al_2Cl_3为催化剂,在CCl_4溶剂中进行乙烯共聚反应。在聚合过程中,发生一异常的颜色突变现象。颜色突变后,体系催化聚合生成分子量很低的产物。从聚合物的结构表征及机理探讨表明:颜色突变后,体系产生了新的活性中心,催化机理发生了转变——由配位机理转变为阳离子机理。