Tunable magnetic properties of nanoparticle two-dimensional assemblies addressed by mixed self-assembled monolayers

Assemblies of magnetic nanoparticles (NPs) are intensively studied due to their high potential applications in spintronic, magnetic and magneto-electronic. The fine control over NP density, interdistance, and spatial arrangement onto substrates is of key importance to govern the magnetic properties through dipolar interactions. In this study, magnetic iron oxide NPs have been assembled on surfaces patterned with self-assembled monolayers (SAMs) of mixed organic molecules. The modification of the molar ratio between coadsorbed 11-mercaptoundecanoic acid (MUA) and mercaptododecane (MDD) on gold substrates is shown to control the size of NPs domains and thus to modulate the characteristic magnetic properties of the assemblies. Moreover, NPs can be used to indirectly probe the structure of SAMs in domains at the nanometer scale.     

Influence of nitrogen implantation on thermoluminescence of synthetic quartz

Thermoluminescence (TL) of synthetic quartz exposed to beta irradiation following implantation with 60?keV N⁺ ions at fluences ranging between 1?×?10¹⁴ and 5?×?10¹⁵?ions/cm² is reported. The glow curve measured at 5°C/s typically consists of a prominent peak near 110°C, studied in this work, and minor glow peaks at around 130°C and 190°C. The TL intensity of the main peak increased both with implantation and with fluence of implantation. The dependence of the intensity on heating rate and fluence suggests that the implantation introduces new defects that may possibly act as recombination centres. The increase in TL intensity with the heating rate exhibited by implanted samples has been observed in other luminescence materials. This anti-quenching phenomenon has been described as a competition effect between multiple luminescence pathways in luminescence materials. Kinetic analysis of the main glow peak using the initial rise, various heating rate and glow curve deconvolution methods shows that the activation energy of the main peak is about 0.7?eV with no systematic change due to ion fluence.     

Frottement interne dans le zirconium irradie aux neutrons A 77 K

Abstract

Le zirconium présente après irradiation neutronique à 77 K sept pics de frottement interne. Les deux premiers correspondent à la réorientation complexe de [icaron]interstitiel libre migrant à trois dimensions en fin de stade I. Le dipole élastique créé par cet interstitiel est monoclinique et sa réorientation complexe donne lieu à un pic dissocié conforme aux prévisions de Nowick. Ce défaut disparait par migration tridimensionnelle en fin de stade I et annihilation correlée puis non correlée. Les autres pics correspondent à des processus intrinsèques (réorientation de petits amas ?interstitiels, bilacune) ou extrinsèques avec intervention ?impuretés ou dc dislocations.

Ces pics ne sont pas fortement affectés par les impuretés.

Seven internal friction peaks are found in 77 K neutron irradiation zirconium. The first and second peaks correspond to the free interstitial reorientation and migration at the end of stage I. The elastic dipole created by this interstitial is monoclinic and its complex reorientation gives rise to “frozen free split” phcnomena predicted by Nowick. This defect disappears by correlated and uncorrelated annihilation after tridimensional migration at the end of stage I. The other peaks correspond either to intrinsic phenomena (interstitial loops, divacancies) or extrinsic processcs involving impurity or dislocation.

These peaks are not strongly affected by impurities.     

Molecularly imprinted polymers for the clean-up of a basic drug from environmental and biological samples

A molecularly imprinted polymer (MIP) was synthesized and evaluated to selectively extract an alpha-blocker, i.e. alfuzosin, from human plasma. The synthesis of the MIP was performed in dichloromethane with methacrylic acid as monomer and the target drug as template. A first series of experiments was carried out in dichloromethane to estimate the potential of the MIP in its specific recognition medium, i.e. dichloromethane, by developing a selective procedure and by measuring the capacity of the sorbent. An optimized procedure was developed for the selective extraction of alfuzosin with a recovery close to 100% in this medium and a specific capacity of 1.3 micromol g(-1) of MIP was measured. A study in aqueous media was also carried out by a comprehensive approach of the retention mechanism in order to build a selective procedure of extraction. The effects of the amount and of the charge of cations were studied and an optimal pH value was defined to limit matrix effects. Then, the alfuzosin MIP was then directly used to selectively extract the target drug from human plasma with an extraction recovery of 60%. Lastly, a soil was extracted by a pressurized solvent and the resulting extract was cleaned up on the MIP, showing the possibility to use this selective sorbent for the sample treatment of various complex matrices.     

Solid-phase extraction for multiresidue analysis of organic contaminants in water

To overcome the limitations of the detection systems associated with gas or liquid chromatography, a sample pretreatment is required with the objective to provide a sample fraction enriched with all the target analytes and as free as possible from other matrix components. There is now no doubt that solid-phase extraction (SPE) has now become the method of choice for carrying out simultaneously the extraction and concentration of many compounds in aqueous samples. Many recent applications of SPE to multiresidue analysis are reviewed with an emphasis on the importance of the choice of the sorbent and of the sample volume. SPE is particularly well adapted to multiresidue analysis including compounds from a wide range of polarity or characterized by various physico-chemical properties. However, SPE is not completely free from practical problems inherent to the nature of the compounds or to the coupling to the chromatographic systems. Many examples are reported to illustrate these problems which can in most cases be circumvented. New developments in SPE are also reviewed.     

Extraction of alkyl methylphosphonic acids from aqueous samples using a conventional polymeric solid-phase extraction sorbent and a molecularly imprinted polymer

The analysis of alkyl methylphosphonic acids (AMPAs) constitutes an important subject for verifying the compliance to the Chemical Weapons Convention (CWC). Indeed, alkyl methylphosphonic acids are the degradation products of V and G nerve agents such as VX, sarin or soman. Lowering the limits of detection of analytical methods for complex aqueous matrices implies the introduction of concentration and clean-up steps in the whole analytical process. Therefore a molecular imprinted polymer (MIP) has been previously developed for the selective extraction and the concentration of the alkyl methylphosphonic acids. Unfortunately, the selective retention process on this MIP has involved the development of hydrogen bonds and so does not allow the direct percolation of aqueous samples. A change of solvent is then necessary and can be performed using solid-phase extraction (SPE) with conventional non selective hydrophobic sorbents. Two polymeric sorbents, Oasis HLB and HR-P resins, were selected for their high specific surface area. The extraction recoveries obtained on both sorbents were compared and the Oasis HLB sorbent was further selected and used for the percolation of acidified aqueous samples. An optimised SPE procedure was then applied to concentrate an aqueous soil extract spiked with isobutyl methylphosphonic acid (iBMPA) and cyclopentyl methylphosphonic acid (cPMPA) that was further cleaned-up by passing through the MIP. The resulting LC-MS full scan chromatograms highlight the clean-up effect of the SPE-MIP association by the removal of the matrix substances and the preservation of 95% of the compounds of interest.     

Selective sample treatment using molecularly imprinted polymers

The molecularly imprinted polymers (MIPs) are synthetic polymers possessing specific cavities designed for a target molecule. By a mechanism of molecular recognition, the MIPs are used as selective sorbents for the solid-phase extraction of target analytes from complex matrices. MIPs are often called synthetic antibodies in comparison with immuno-based sorbents; they offer some advantages including easy, cheap and rapid preparation and high thermal and chemical stability. This review describes the use of MIPs in solid-phase extraction with emphasis on their synthesis, the various parameters affecting the selectivity of the extraction, their potential to selectively extract analytes from complex aqueous samples or organic extracts, their on-line coupling with LC and their potential in miniaturized devices.     

Isoquinolin-1-ylidenes as electronically tuneable ligands

The novel isoquinolin-1-ylidene ligands, introduced into Rh(I) complexes by exploiting the carbene-like reactivity of adducts , exhibit ligand properties similar to those of classic NHCs, and their electronic properties can be tuned by the introduction of electron-withdrawing or donating groups in the benzene ring.     

Molecular recognition controls the organization of mixed self-organized bis-urea-based mineralization templates for CaCO(3)

To investigate the role and importance of nondirectional electrostatic interactions in mineralization, we explored the use of Langmuir monolayers in which the charge density can be tuned using supramolecular interactions. It is demonstrated that, in mixed Langmuir monolayers of bis-ureido surfactants containing oligo(ethylene oxide) and ammonium head groups associated with matching or nonmatching spacers between the two urea groups, the organization is controlled by molecular recognition. These different organizations of the molecules lead to different nucleation behavior in the mineralization of calcium carbonate. The formation of modified calcite and vaterite crystals was induced selectively by different phases of mixed monolayers, and they were characterized by SEM, TEM, and SAED. To understand the influence of the mixed Langmuir monolayers on the crystallization process, we studied the mixtures by means of (pi-A) isotherms and Brewster angle microscopy observations. Infrared reflection-absorption spectroscopy experiments were also performed on Langmuir-Schaefer films. From these results, we conclude that the local organization of the two systems discussed here gives rise to differences in both charge density and flexibility that together determine not only polymorph selection and the nucleation face but also the morphology of the resulting crystals.     

Dynamics of excited hydroxyl radicals in hydrogen-based mixtures behind reflected shock waves

The chemiluminescence originating from OH¹, the excited hydroxyl radical, is one of the most extensively used diagnostics to characterize auto-ignition delay time of gaseous mixtures behind reflected shock waves. We have carried out new experiments and modeling of this diagnostic as well as analyzed previous results for hydrogen-based mixtures, including H₂–O₂, H₂O₂–H₂O, H₂–N₂O and H₂–O₂–N₂O. The experiments were analyzed with a detailed chemical reaction model which included mechanisms for OH¹ creation, quenching and emission. Simulations of the reaction behind reflected shock waves were used to predict OH¹ emission profiles and compare this with measured results as well as profiles of temperature and the ground state concentrations of OH. Analysis of OH¹ rates of progress demonstrates that a quasi-steady state approximation is applicable and an algebraic model for OH¹ concentrations can be derived that relates emission to the product of concentrations of O and H for H₂–O₂ and H₂O₂ mixtures and an additional contribution by the product of H and N₂O when N₂O is an oxidizer.