Photoisomerization of a Maleonitrile‐Type Salen Schiff Base and Its Application in Fine‐Tuning Infinite Coordination Polymers

Strategically designed salen ligand 2,3‐bis[4‐(di‐p‐tolylamino)‐2‐hydroxybenzylideneamino]maleonitrile ( 1 ), which has pronounced excited‐state charge‐transfer properties, shows a previously unrecognized form of photoisomerization. On electronic excitation (denoted by an asterisk), 1Z *→ 1E isomerization takes place by rotation about the C2? C3 bond, which takes on single‐bond character due to the charge‐transfer reaction. The isomerization takes place nonadiabatically from the excited‐state ( 1Z ) to the ground‐state ( 1E ) potential‐energy surface in the singlet manifold; 1Z and 1E are neither thermally inconvertible at ambient temperature (25–30 °C), nor does photoinduced reverse 1E *→ 1Z (or 1Z *) isomerization occur. Isomers 1Z and 1E show very different coordination chemistry towards a Zn^II precursor. More prominent coordination chemistry is evidenced by a derivative of 1 bearing a carboxyl group, namely, N,N′‐dicyanoethenebis(salicylideneimine)dicarboxylic acid ( 2 ). Applying 2Z and its photoinduced isomer 2E as building blocks, we then demonstrate remarkable differences in morphology (sphere‐ and needlelike nanostructure, respectively) of their infinite coordination polymers with Zn^II.     

Formation of polymer vesicles by liquid crystal amphiphilic block copolymers

We report the formation of polymer vesicles (or polymersomes) by a new class of amphiphilic block copolymers in which the hydrophobic block is a side-on nematic liquid crystal polymer. Two series of these block copolymers, named PEG-b-PA444 and PEG-b-PMAazo444, with different hydrophilic/hydrophobic ratios were synthesized and characterized in detail. Polymersomes and nanotubes were formed by adding water into a solution of copolymers in dioxane. Polymersomes in water were finally obtained by dialyzing the resulting mixture against water. These self-assemblies have been studied by classical TEM and cryo-TEM. For the PEG-b-PA444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 40/60 to 19/81. For PEG-b-PMAazo444 series, polymersomes were observed for hydrophilic/hydrophobic ratios ranging from 26/74 to 18/82. For a PEG-b-PA444 sample with hydrophilic/hydrophobic ratio equal to 25/75, a tubular morphology with tube diameter of typically 100 nm and tube length of up to 10 mum was also observed together with polymersomes during addition of water into the polymer solution in dioxane.     

Anionic polyelectrolyte adsorption on mica mediated by multivalent cations: a solution to DNA imaging by atomic force microscopy under high ionic strengths

Adsorption of DNA molecules on mica, a highly negatively charged surface, mediated by divalent or trivalent cations is considered. By analyzing atomic force microscope (AFM) images of DNA molecules adsorbed on mica, phase diagrams of DNA molecules interacting with a mica surface are established in terms of concentrations of monovalent salt (NaCl) and divalent (MgCl2) or multivalent (spermidine, cobalt hexamine) salts. These diagrams show two transitions between nonadsorption and adsorption. The first one arises when the concentration of multivalent counterions is larger than a limit value, which is not sensitive to the monovalent salt concentration. The second transition is due to the binding competition between monovalent and multivalent counterions. In addition, we develop a model of polyelectrolyte adsorption on like-charged surfaces with multivalent counterions. This model shows that the correlations of the multivalent counterions at the interface between DNA and mica play a critical role. Furthermore, it appears that DNA adsorption takes place when the energy gain in counterion correlations overcomes an energy barrier. This barrier is induced by the entropy loss in confining DNA in a thin adsorbed layer, the entropy loss in the interpenetration of the clouds of mica and DNA counterions, and the electrostatic repulsion between DNA and mica. The analysis of the experimental results provides an estimation of this energy barrier. We then discuss some important issues, including DNA adsorption under physiological conditions.     

Ligand Selectivity by Inserting GCGC-Tetrads into G-Quadruplex Structures

G-Quadruplexes (G4s) assembled from tandem G-rich repeat sequences exhibit significant biological functions and applications, which may well depend on their structural features, such as the planar arrangement of G-tetrads and flexibility of loop regions. It has been found that cytosine-intercalated G-repeat sequences also assemble to be quadruplex structures, involving the formation of nonplanar GCGC-tetrads. Herein, to investigate the effect of GCGC-tetrads on structural properties of G4s, some previously studied quadruplexes with or without GCGC-tetrads were selected, and were used to interact with various developed G4 ligands. Our data show that stacked G-tetrads in quadruplexes are important for the π–π stacking interactions, thus promoting the combination with end-stacking ligands, such as porphyrins or planar small molecules. This is confirmed by the observation that the quadruplex formed by d(GGGCT₄GGGC) with two internal G-tetrads and two external GCGC-tetrads can bind to planar ligands in the presence of specific G4-stabilizing cations, including K⁺ and Pb²⁺, and can realize the sensitive detection of Pb²⁺. However, the quadruplex composed of two external G-tetrads and two internal GCGC-tetrads formed by d(GCGGT₃GCGG) facilitates the binding of nonplanar ligands, such as triphenylmethane (TPM) dyes, owing to the structural flexibility induced by internal GCGC-tetrads. This work provides new insights into the interaction between DNA quadruplexes and specific ligands, which is beneficial to the development of quadruplex-based biosensors and the design of anticancer drugs.     

Structure and synthesis of 6-(substituted-imidazol-1-yl)purines: versatile substrates for regiospecific alkylation and glycosylation at N9

X-ray crystal structures of several 6-(azolyl)purine base and nucleoside derivatives show essentially coplanar conformations of the purine and appended 6-(azolyl) rings. However, the planes of the purine and imidazole rings are twisted approximately 57 degrees in a 2-chloro-6-(4,5-diphenylimidazol-1-yl)purine nucleoside, and a twist angle of approximately 61 degrees was measured between the planes of the purine and pyrrole rings in the structure of a 6-(2,5-dimethylpyrrol-1-yl)purine nucleoside derivative. Shielding "above" N7 of the purine ring by a proximal C-H on the 6-azolyl moiety is apparent with the coplanar compounds, but this effect is diminished in those without coplanarity. Syntheses of 6-(azolyl)purines from both base and nucleoside starting materials are described. Treatment of 2,6-dichloropurine with imidazole gave 2-chloro-6-(imidazol-1-yl)purine. Modified Appel reactions at C6 of trityl-protected hypoxanthine and guanine derivatives followed by detritylation gave 6-(imidazol-1-yl)- and 2-amino-6-(imidazol-1-yl)purines. Imidazole was introduced at C6 of 2',3',5'-tri-O-acetylinosine by a modified Appel reaction, and solvolysis of the glycosyl linkage gave 6-(imidazol-1-yl)purine. Guanosine triacetate was transformed into the protected 2,6-dichloropurine nucleoside, which was subjected to S(N)Ar displacement with imidazoles at C6 followed by glycosyl solvolysis to provide 2-chloro-6-(substituted-imidazol-1-yl)purines. Potential applications of these purine derivatives are outlined.     

Degradation of Plasticized PVB During Reprocessing by Kneading

Possibility and conditions for optimal re-processing of plasticized polyvinylbutyral (PVB) were tested. The aim of this work was to investigate degradation of PVB sheet at various kneading conditions and to estimate the influence of temperature, air oxygen and mechanical stress on the progress of degradation process. In order to confirm the influence of humidity on the PVB properties during reprocessing, the sheets with the humidity content of 0.5 and 8.0% were tested. The PVB degradation was determined from the changes of melt flow index, mechanical properties in terms of stress and elongation at break, yellowness and molecular weight distribution. The optimal recycling conditions for PVB were estimated from the evaluation of all measured properties and their changes.     

Tether‐Directed Bisfunctionalization Reactions of C60 and C70

Four easily isolable regio‐ and stereoselective bis‐adducts of C₆₀ and C₇₀, as well as a new C₇₀‐dumbbell derivative, have been synthesized by using two different bismalonate tethered moieties. The derivatives that possess relatively long‐tethered moieties show highly symmetric addition patterns, as evidenced by spectroscopic measurements, whereas the derivatives possessing the shorter‐tethered moiety exhibit interesting addition patterns on C₆₀ and C₇₀.     

Urinary metabonomics study of Wu-tou-tang and its co-decoction with Pinelliae Rhizoma in adjuvant-induced arthritis rats

Wu-tou-tang was applied to treat rheumatoid arthritis,rheumatic arthritis,and joint pain for thousands of years.Aconiti Radix Cocta is the primary component of Wu-tou-tang,and Aconiti Radix and Pinelliae Rhizoma is one of the famous combination taboos in traditional Chinese medicine.A urinary metabonomics method based on the ultra-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry(UPLC-Q-TOF-MS) had been established to quantify the changes of the endogenous metabolites in the urine of adjuvant-induced arthritis rats treated by Wutou-tang and Wu-tou-tang and Pinelliae Rhizoma(WP) co-decoctions.There was a clear separation between Wu-tou-tang and WP co-decoction treated groups in the PCA model.16 potential biomarkers had been identified which correlated with how Pinelliae Rhizoma influenced the therapeutic effect made by Wu-tou-tang.Results showed that it could reduce the therapeutic effects or make some side effects when Pinelliae Rhizoma is added in Wu-tou-tang.This is the first time to use metabonomics to investigate the reason of combination taboo.     

A fluorescent supramolecular crosslinked polymer gel formed by crown ether based host-guest interactions and aggregation induced emission

Based on the combination of B21C7/dialkylammonium salt host-guest interactions and tetraphenylethylene(TPE)-based aggregation-induced emission(AIE) effect, a fluorescent supramolecular crosslinked polymer gel was successfully prepared. Compared with the solution of TPE-containing small molecules, this gel exhibited remarkable fluorescence enhancement due to the AIE effect of TPE units. The "gelation induced fluorescence emission" phenomenon can be explained by the hindered intramolecular rotation of phenyl rings of TPE. Because of the reversibility and stimuli-responsiveness of the B21C7/dialkylammonium salt host-guest interactions, the transition between the fluorescent supramolecular crosslinked polymer gel and the disassembled sol with very weak fluorescence can be realized by adding p H and thermal stimuli. This novel material contributes to the development of supramolecular chemistry, polymer science and fluorescent materials and offers a new method to construct functional supramolecular materials.