Morphology and mechanical behavior of isotactic polypropylene with different stereo‐defect distribution in injection molding

Large amount of work has been published on the isotacticity–properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of iPP injection molding samples is still not clear. In this study, two different isotactic polypropylene (iPP) resins (PP‐A and PP‐B) with similar average isotacticity but different stereo‐defect distribution were selected to investigate the morphology evolution and mechanical properties (tensile and notching) of their injection molding samples using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), 2D wide angle X‐ray diffraction (2D‐WAXD), and scanning electron microscope (SEM). The results of DMA showed that the molecular movement ability of PP‐A (with less uniform distribution of stereo‐defect) was stronger than that of PP‐B, meanwhile the analysis of DSC and SEM suggested that after injection molding, smaller spherullites, and crystals with higher perfection had formed in the specimens of PP‐A. The resulting of tensile properties of PP‐A were found to be better than that of PP‐B. The results of morphology evolution by SEM observation and 2D‐WAXD showed that PP‐A is more likely to occur interspherulite deformation and can disperse the tensile stress more efficiently, and therefore, its crystal structure can withstand a greater force when tensile stress is applied. On the other hand, PP‐B has larger spherulites and boundaries, and low perfection of lamellaes, and the intraspherulte deformation tend to take place. It is easier for the crystal of PP‐B to be broken up and reoriented along the tensile direction. Copyright © 2014 John Wiley & Sons, Ltd.     

Large Hexagonal Bi‐ and Trilayer Graphene Single Crystals with Varied Interlayer Rotations

Bi‐ and trilayer graphene have attracted intensive interest due to their rich electronic and optical properties, which are dependent on interlayer rotations. However, the synthesis of high‐quality large‐size bi‐ and trilayer graphene single crystals still remains a challenge. Here, the synthesis of 100 μm pyramid‐like hexagonal bi‐ and trilayer graphene single‐crystal domains on Cu foils using chemical vapor deposition is reported. The as‐produced graphene domains show almost exclusively either 0° or 30° interlayer rotations. Raman spectroscopy, transmission electron microscopy, and Fourier‐transformed infrared spectroscopy were used to demonstrate that bilayer graphene domains with 0° interlayer stacking angles were Bernal stacked. Based on first‐principle calculations, it is proposed that rotations originate from the graphene nucleation at the Cu step, which explains the origin of the interlayer rotations and agrees well with the experimental observations.     

Effect of Cu content on structure,hydrogen storage properties and electrode performance of LaNi4.1-x Co0.6Mn0.3Cu x alloys

The effect of Cu content on structure, hydrogen storage, and electrochemical properties of LaNi_4.1-x Co_0.6Mn_0.3Cu _x alloys has been investigated. For sample, A, B, C, and D are used to represent alloys (x?=?0, 0.15, 0.3, and 0.45), respectively. The results indicate that the four alloys are all single-phase alloy with LaNi₅ phase of CaCu₅ hexagonal structure, the hydrogen storage capacities of the alloy are about 1.49 wt% (A), 1.48 wt% (B), 1.43 wt% (C), and 1.25 wt% (D) at 303 K. With the increase of Cu content (x) from A to D, hydrogen desorption plateau pressure and pressure hysteresis decrease. Alloy electrode A shows better activation property and higher capacity (334.44 mAh/g). The addition of Cu improves the cyclic stability of the alloy electrodes when x?=?0?~?0.45. However, their self-discharge properties and high-rate dischargeability (HRD) decrease with the increase of x. Further, electrochemical kinetics and electrochemical impedance spectroscopy (EIS) analysis show that the reaction of alloy electrode is controlled by charge transfer step, and the adding of Cu benefits the electrode properties in alkaline solution.     

Divergent Syntheses of Fused β‐Naphthol and Indene Scaffolds by Rhodium‐Catalyzed Direct and Decarbonylative Alkyne–Benzocyclobutenone Couplings

A tunable rhodium‐catalyzed intramolecular alkyne insertion reaction proceeding through the C? C cleavage of benzocyclobutenones is described. Selective formation of either the direct or decarbonylative insertion product can be controlled by using different catalytic systems. A variety of fused β‐naphthol and indene scaffolds were obtained in good yields with high functional group tolerance. This work illustrates a divergent approach to synthesize fused‐ring systems by C? C activation/functionalization.     

Facile Synthesis of Chiral Spirooxindole‐Based Isotetronic Acids and 5‐1H‐Pyrrol‐2‐ones through Cascade Reactions with Bifunctional Organocatalysts

Unprecedented organocatalyzed asymmetric cascade reactions have been developed for the facile synthesis of chiral spirooxindole‐based isotetronic acids and 5‐1H‐pyrrol‐2‐ones.The asymmetric 1,2‐addition reactions of α‐ketoesters to isatins and imines by using an acid–base bifunctional 6′‐OH cinchona alkaloid catalyst, followed by cyclization and enolization of the resulting adducts, gave chiral spiroisotetronic acids and 5‐1H‐pyrrol‐2‐ones, respectively, in excellent optical purities (up to 98 % ee). FT‐IR analysis supported the existence of hydrogen‐bonding interaction between the 6′‐OH group of the cinchona catalyst and an isatin carbonyl group, an interaction that might be crucial for catalyst activity and stereocontrol.     

Mixed‐Ligand Catalysts: A Powerful Tool in Transition‐Metal‐Catalyzed Cross‐Coupling Reactions

Transition‐metal‐catalyzed cross‐coupling reactions have fundamentally revolutionized organic synthesis, empowering the otherwise difficult to achieve products with rapid and convenient accesses alongside excellent yields. Within these reactions, ligands often play a critical role in specifically and effectively advocating the corresponding catalysis. Consequently, a myriad of ligands have been created and applied to make a fine tuning of electronic and steric effect of catalysts, remarkably promoting catalytic efficiency and applicability. The “mixed‐ligand” concept has recently emerged; by combining and capitalizing on the superiority of each individual ligand already available, an expedient way can be achieved to reach a larger extent of catalytic diversity and efficacy. Given the availability of a wealth of ligands, it is reasonable to have great expectations for the original application of mixed‐ligand catalytic systems and their important value in organic synthesis.     

Aromatic Nitrogen Mustard‐Based Prodrugs: Activity,Selectivity, and the Mechanism of DNA Cross‐Linking

Three novel H₂O₂‐activated aromatic nitrogen mustard prodrugs ( 6 – 8 ) are reported. These compounds contain a DNA alkylating agent connected to a H₂O₂‐responsive trigger by different electron‐withdrawing linkers so that they are inactive towards DNA but can be triggered by H₂O₂ to release active species. The activity and selectivity of these compounds towards DNA were investigated by measuring DNA interstrand cross‐link (ICL) formation in the presence or absence of H₂O₂. An electron‐withdrawing linker unit, such as a quaternary ammonia salt ( 6 ), a carboxyamide ( 7 ), and a carbonate group ( 8 ), is sufficient to deactivate the aromatic nitrogen mustard resulting in less than 1.5 % cross‐linking formation. However, H₂O₂ can restore the activity of the effectors by converting a withdrawing group to a donating group, therefore increasing the cross‐linking efficiency (>20 %). The stability and reaction sites of the ICL products were determined, which revealed that alkylation induced by 7 and 8 not only occurred at the purine sites but also at the pyrimidine site. For the first time, we isolated and characterized the monomer adducts formed between the canonical nucleosides and the aromatic nitrogen mustard ( 15 ) which supported that nitrogen mustards reacted with dG, dA, and dC. The activation mechanism was studied by NMR spectroscopic analysis. An in vitro cytotoxicity assay demonstrated that compound 7 with a carboxyamide linker dramatically inhibited the growth of various cancer cells with a GI₅₀ of less than 1 μM , whereas compound 6 with a charged linker did not show any obvious toxicity in all cell lines tested. These data indicated that a neutral carboxyamide linker is preferable for developing nitrogen mustard prodrugs. Our results showed that 7 is a potent anticancer prodrug that can serve as a model compound for further development. We believe these novel aromatic nitrogen mustards will inspire further and effective applications.     

Visible‐Light‐Responsive Reversible Photoacid Based on a Metastable Carbanion

A new photoacid that reversibly changes from a weak to a strong acid under visible light was designed and synthesized. Irradiation generated a metastable state with high C?H acidity due to high stability of a trifluoromethyl‐phenyl‐tricyano‐furan (CF₃PhTCF) carbanion. This long‐lived metastable state allows a large proton concentration to be reversibly produced with moderate light intensity. Reversible pH change of about one unit was demonstrated by using a 0.1 mM solution of the photoacid in 95 % ethanol. The quantum yield was calculated to be as high as 0.24. Kinetics of the reverse process can be fitted well to a second‐order‐rate equation with k=9.78×10² M ^?1 s^?1. Response to visible light, high quantum yield, good reversibility, large photoinduced proton concentration under moderate light intensity, and good compatibility with organic media make this photoacid a promising material for macroscopic control of proton‐transfer processes in organic systems.     

Enhancement of Spin Relaxation in an FeDy2Fe Coordination Cluster by Magnetic Fields

Two [FeLn₂Fe(μ₃‐OH)₂(teg)₂(N₃)₂(C₆H₅COO)₄] compounds (where Ln=Y^III and Dy^III; teg=triethylene glycol anion) have been synthesized and studied using SQUID and Mössbauer spectroscopy. The magnetic measurements on both compounds indicate dominant antiferromagnetic interactions between the metal centers. Analysis of the ⁵⁷Fe Mössbauer spectra complement the ac magnetic susceptibility measurements, which show how a static magnetic field can quench the slow relaxation of magnetization generated by the anisotropic Dy^III ions.     

An Unusual Triphenylphosphine Oxide Catalyzed Stereoselective 1,3‐Dichlorination of Unsaturated Ketoesters

An unusual Ph₃PO‐catalyzed stereoselective 1,3‐dicholorination of an unsaturated ketoester has been developed. The novel activation mode involved in this cascade reaction can promote consecutively elusive transformations. The products were obtained with good yields and excellent stereoselectivities. This reaction makes important complementation to the limitations associated with the field of dichlorination.