HFSiS构型及其稳定性的理论研究

利用密度泛函理论对三线态HFSiS分子结构及其稳定性进行了详细的理论研究.在B3LYP/6-311G**水平上计算出了各驻点的优化构型、振动频率,并对各个振动模式加以归属,在同样的理论水平上进行了IRC计算;CCSD(T)结合6-311G**基组对于驻点进行单点能及相对能量的计算;根据振动模式分析来阐明三线态势能面上各驻点之间的变化,并与单线态势能面进行比较.计算结果表明,三线态HFSiS分子存在6种异构体,3HFSiS结构在动力学和热力学上都是最稳定的,实验上应该可以观测到;在两组键旋转异构体当中,结构-2具有一定的动力学稳定性,而结构-1动力学稳定性较差;3SiSHF在动力学上和热力学上都是最不稳定的结构.     

计入地面附加衰减的声屏障插入损失估算方法*

基于理论推导和计算,给出了公路声屏障声学设计中,在考虑地面附加衰减情况下计算插入损失的方法。该方法综合考虑了有限长线声源无限长声屏障绕射声衰减量、有限长线声源地面衰减量及遮蔽角对插入损失的影响。通过与《声屏障声学设计和测量规范》（HJ/T90-2004）的计算结果的对比,验证了本文所给方法的精确性及可行性,并对规范所给地面衰减修正量进行了商榷。最后,给出了当预测点位于有限长路段中央法线上时,通过计算线声源地面衰减量得到计算插入损失所需参数值,再计算插入损失的简便方法。本研究为存在地面附加衰减情况下有限长声屏障插入损失计算提供了一个新的参考方法。     

基于红外光谱研究沥青燃烧机理和有害气体成分分析

利用Rosemount气体分析仪和定碳炉搭建起固定床燃烧反应试验平台,通过红外光谱分析技术定量分析沥青及其胶浆在高升温速率条件下燃烧反应的有毒气态产物成分、及其释放规律。研究表明,在高升温速率、近等温条件下,沥青及胶浆的燃烧过程可近似分为活泼挥发组分析出燃烧、二次挥发析出结合残炭燃烧两个阶段,其主要气态产物为CO₂,CO,NO,NO₂及SO₂。沥青材料中活泼挥发组分含量是影响燃烧气态产物释放规律的关键因素之一,减少沥青材料中活泼挥发组分的含量可有效降低燃烧气态产物的生成、尤其是CO的产生。     

郡县制国家现代化：中央政府如何扩大公共事务治理职能

郡县制国家的传统职能是“管人”,但是在当代,为了适应现代世界,需要加强和完善“管事”的职能。然而,加强“管事”的职能遇到的一大障碍,是“管事”与“管人”通常难以分开,带来管事与管人的冲突。在全国性公共事务上,面对管事与管人的冲突,郡县制国家的一种改革方向,即建立中央统一管理与地方属地管理相结合的体制,既扩大中央政府的治理职能,同时又发挥纵向约束机制的作用,从而能改善全国性公共事务治理。此种中央统一管理与地方属地管理相结合的体制,通常不是中央政府事先设计出来的,而是在改革过程中,经由中央政府与地方政府的策略性互动过程,逐渐建立起来的。因此,郡县制国家蕴含着一种潜力,即在公共事务治理上,包括地方公共事务和全国性公共事务,可以引入和发挥“纵向约束机制”的作用,使得国家既保持“管人”的基本体制不变,又能提高治理能力。     

Flexible and stretchable electrodes for next generation polymer electronics: a review

Transparent conductive electrodes play a significant role in the fabrication and development of optoelectronic devices. As next generation optoelectronic devices tend towards mobile and wearable devices, the added attribute of flexibility or stretchability for these electrodes becomes increasingly important. However, mechanical requirements aside, transparent conductive electrodes must still retain high transparency and conductivity, with the metrics for these parameters being compared to the standard, indium tin oxide. In the search to replace indium tin oxide, two materials that have risen to the forefront are carbon nanotubes and silver nanowires due to their high transparency, conductivity, mechanical compliance, and ease of fabrication. This review highlights recent innovations made by our group in electrodes utilizing carbon nanotubes and silver nanowires, in addition to the use of these electrodes in discrete devices and integrated systems.     

Determination of pseudo‐ginsenoside GQ in human plasma by high performance liquid chromatography–tandem mass spectrometry

A specific, sensitive and rapid method based on high performance liquid chromatography coupled to tandem mass spectrometry (HPLC‐MS/MS) was developed for the determination of pseudo‐ginsenoside GQ in human plasma. Liquid–liquid extraction was used to isolate the analyte from biological matrix followed by injection of the extracts onto a C₈ column with isocratic elution. Detection was carried out on a triple quadrupole tandem mass spectrometer (API‐4000 system) in multiple reaction monitoring mode using negative electrospray ionization. The mobile phase consisted of methanol–10 mm ammonium acetate (90:10, v/v) and the flow rate was 0.3 mL/min. The method was validated over the concentration range of 5.0–5000.0 ng/mL for plasma. Inter‐ and intra‐day precisions (relative standard deviation) were all within 15% and the accuracy (relative error) was ≤9.4%. The lower limit of quantitation was 5.0 ng/mL. The pseudo‐ginsenoside GQ was stable after 8 h at room temperature, 24 h at autosampler and three freeze–thaw cycles (from ?30 to 25 °C). The method was successfully applied to the pharmacokinetic study of pseudo‐ginsenoside GQ in healthy Chinese volunteers. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal-oxidative degradation of high-amylose corn starch

Thermal oxidation degradation of high-amylose (80 %) cornstarch has been studied using thermogravimetry analyser coupled to Fourier transform infrared spectroscopy (TG-FTIR). The linear structure of amylose provides a modal material to understand how the starch microstructure affects on the decomposition mechanisms. Kinetics of the thermal oxidation has been studied using different methods. It is found that the thermal oxidation degradation is more complex than thermal degradation, thermal oxidation degradation kinetics of the starch can be interpreted in terms of multi-step degradation mechanism, the activation energies obtain from Flynn–Wall–Ozawa (F–W–O) method and modified Coats–Redfern method are in good agreement. TG-FTIR and FTIR results confirm that the thermal oxidation mechanism of starch is a process containing long chain scission and glowing combustion.     

Pyrone Diels–Alder Routes to Indolines and Hydroindolines: Syntheses of Gracilamine,Mesembrine, and Δ7‐Mesembrenone

Although the Diels–Alder reaction has long been utilized for the preparation of numerous heterocycles, opportunities to extend its power remain. Herein, we detail a simple, modular, and robust approach that combines various amines regioselectively with 4,6‐dichloropyrone to create substrates which, under appropriate conditions, can directly deliver varied indolines and hydroindolines through [4+2] cycloadditions with substitution patterns difficult to access otherwise. As an initial demonstration of the power of the strategy, several different natural products have been obtained either formally or by direct total synthesis, with efforts toward one of these—the complex amaryllidaceae alkaloid gracilamine—affording the shortest route to date in terms of linear step count.     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012