等径管道的三维重建

由轮廓线重建物体的现有方法，不能准确地恢复原有管道的形状．本文提出了一种等径管道的三维重建方法，能较为准确地恢复原管道的三维结构．     

取代基效应(SCS)与乙烯-α-烯烃共聚物的序列结构Ⅲ.定量分析

本文在分析乙烯-α-烯烃共聚物序列结构时,把代表共单体反接单元的亚甲基(CH₂)βγ和γδ分别归属给了二元组VV和三元组EEV。与此同时,CH₂-δδ和δδ⁺归属给了二元组EE。表征乙烯长序列的CH₂-δ⁺δ⁺分属二元组EE和三元组EEE,对应峰强度在EE和EEE之间的分配是处理序列分布的关键。在本文中运用序列结构的Bovey关系和Randall统计进行演算,求得了修正值△的数学表达式,严格解和近似解。在规则链条件下得到的近似解与G.J.Ray的结果完全相同。当共单体含量较少时,谱峰强度Iδ⁺δ⁺的分配接近相等。在二元组和三元组的水平上,乙烯-α-稀烃共聚物的¹³C NMR谱中共有十三个峰,属于CH₂的有十个,属于CH的有三个。利用这些谱峰的强度数据可以建立一套计算公式,由此提供共聚物序列结构的全部信息。因此这是一个研究乙烯-α-烯烃共聚物序列结构的普适方法。     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

数显温控精确测量金属丝的温度系数

在传统金属导体温度系数测量中对于金属丝的加热通常采用了水浴加热法或油浸加热法。这两种方法存在着短路、产生不良气体污染、温度测量不精确等缺点。首次使用了数显温度可控的功率电阻作为金属丝的加热源,在测量中采用了双臂电桥、金属丝的四端电阻接线方式,不仅实现了金属丝的温度可控性和实时测量性,而且将测量精度提高到3%以内。     

能耗率极值原理和重力理论交互作用下粗质颗粒的浓度垂线分布

本文同时运用能耗率极值原理和重力理论研究了固液两相流在粗质颗粒时固相浓度的垂线分布,通过探讨能耗率极值原理对“非单向性”作用问题,进一步揭示了两相流运动的机理。计算结果与实测数据有较好的吻合。其研究方法、原理、步骤也极易推广到其它各种粒径的固相。     

氯离子柱撑水滑石共沉淀法合成反应动力学

根据氯离子型层状复合氢氧化物(LDH-Cl)制备过程中溶液浓度变化的监测结果和不同反应进程时产物的EDS、IR、XRD、TEM、TG-DTA表征结果,研究了合成LDH-Cl的共沉淀反应动力学特征及机理.实验结果表明, LDH-Cl的生成符合多核层表面反应动力学模型;反应过程中LDH的晶胞参数c从2.421 nm变为2.399 nm,通道高度h由0.3321 nm减小为0.3228 nm,粒子直径Da由6.40 nm增大为15.16 nm, Dc由7.43 nm增大到10.93 nm,纵横比由0.86增大为1.39; IR和TG-DTA特征变化表明了层板对阴离子作用的强度和层板的结构稳定性随反应进程而提高.     

毛细管凝胶电泳的激光光热在线检测

近年来,毛细管电泳已成为一种高效快速的微化学分离分析新技术,在无机、有机及生物化学分析中得到了广泛的应用.但毛细管的内径小,进样量在pg～ng级,给样品的检测带来新的困难.因此,发展高灵敏度的显微在线检测器,已成为毛细管电泳技术发展中的重要环节.基于各种原理的检测器研究已有报道~[1].Dovichi等曾用热透镜技术在线检测了乙腈/     

Synthesis,crystal structure and property of a novel azide-bridged one-dimensional chain copper(II) complex with a dinucleating macrocyclic polyamine

An azide-bridged polymeric cationic chain complex, [LCu₂(N₃)₂]n(ClO₄)_2n ·n(H₂O)**, where L=the dinucleating macrocyclic ligand bis-p-xylylBISDIEN, has been prepared and characterized by x-ray crystallography, u.v.-vis and i.r. spectra, and by magnetic measurements. The structure consists of cationic azide-bridged [LCu₂(N₃)₂]²⁺ (unit) chains, non-coordinated perchlorate anions and crystallized water molecules. The azide anion is bound to two copper atoms in neighboring units with an end-to-end bridging mode. In each unit, the copper atoms have a different coordination geometry; Cu(1) is a four-coordinated, distorted square-planar geometry, whereas Cu(2) is a five-coordinated, distorted square-pyramid. The electronic spectra of the title complex differ in anhydrous and in aqueous MeCN solutions, indicating that dissociation and solvation occur in aqueous solutions. The characteristic i.r. absorptions of azides and perchlorates are described. Magnetic moments vary from 2.05 (B.M.) at 300K to2.01 (B.M.) at 80K, which suggests that very weak interactions exist between the metals.