A convenient method to prepare random LA/CL copolymers from poly(L-lactide) and ε-caprolactone

Sequential addition of L-lactide(LA) followed by ε-caprolactone(CL), and simultaneous addition of both monomers, afforded random LA/CL copolymers in the presence of lanthanide aryloxides under mild conditions. Transesterification was proved to play a predominant role in random copolymer formation. Moreover, treatment of poly(L-lactide) with ε-CL led to random copolymer formation, which provides a new strategy not only to prepare random LA/CL copolymers, but also to directly modify PLLA.     

Multidimensional Gas Chromatography–Mass Spectrometry Method for Fingerprinting Polycyclic Aromatic Hydrocarbons and Their Alkyl-Homologs in Crude Oil

The composition of polycyclic aromatic hydrocarbons in crude oil is usually too complex to use standard capillary gas chromatography to separate all of the components. In this study, a multidimensional gas chromatography–mass spectrometry (GC-MS) technique was used to analyze polycyclic aromatic hydrocarbon fractions of crude oil collected from the Dongying oil field in the Bohai Sea. A DB-17MS column (30?m?×?0.25?mm?×?0.25?µm) was used as a prefractionating column and only selected heart-cuts were transferred to the second chromatographic dimension (HP-5MS, 15?m?×?0.25?mm?×?0.25?µm) by a pressure-adjusted continual flow-type switching device for quantification of the polycyclic aromatic hydrocarbons. The chromatographic elements and parameters, such as detector selection and column combinations, were optimized. Naphthalene, phenanthrene, fluorene, dibenzothiophene, chrysene, and their C₁–C₄ alkyl homologs were identified. The profile of the polycyclic aromatic hydrocarbons obtained using the multidimensional GC-MS method was compared with the results obtained by traditional one-dimensional GC-MS.     

TBAI-mediated regioselective 5-exo-dig iodinative oxocyclization of 2-alkynylbenzamides for the synthesis of isobenzofuran-1-imines and isobenzofurans

Alkyne-based regioselective functionalization is an important transformation method for the synthesis of a wide variety of organic products. In this work, a regioselective TBAI-mediated oxidative 5-exo-dig iodo-oxycyclization of 2-alkynylbenzamide is used for the synthesis of various isobenzofuran derivatives with excellent functional group tolerance and high reaction efficiency. We hypothesized that using water in a mixed solvent could change the reaction pathway and realize a high reaction regioselectivity. Furthermore, the application of the developed procedure was demonstrated by the synthesis of phthalazin-1(2H)-one and aryl-substituted isobenzofurans.     

Synthesis of a Helical Bilayer Nanographene

A rigid, inherently chiral bilayer nanographene has been synthesized as both the racemate and enantioenriched M isomer (with 93 % ee) in three steps from established helicenes. This folded nanographene is composed of two hexa‐peri‐hexabenzocoronene layers fused to a [10]helicene, with an interlayer distance of 3.6 Å as determined by X‐ray crystallography. The rigidity of the helicene linker forces the layers to adopt a nearly aligned AA‐stacked conformation, rarely observed in few‐layer graphene. By combining the advantages of nanographenes and helicenes, we have constructed a bilayer system of 30 fused benzene rings that is also chiral, rigid, and remains soluble in common organic solvents. We present this as a molecular model system of bilayer graphene, with properties of interest in a variety of potential applications.     

Isolation and structure determination of a new flavone glycoside from seed residues of seabuckthorn (Hippophae rhamnoides L.)

In this study, a valid method was established for the isolation and purification of flavone glycosides from Hippophae rhamnoides L. seed residues using high-speed counter-current chromatography in one step, with a solvent system of ethyl acetate-methanol-n-butyl alcohol-water (9:1:0.5:9, v/v/v/v). A total of 28.8 mg compound I and 57.3 mg compound II were obtained from 200 mg of flavone H-glycosides rich extract, with purities of 98.3 and 96.4%, respectively. The structures of two compounds were identified by MS and NMR. 3-O-β-D-Sophorosylkaempferol-7-O-{3-O-[2(E)-2,6-dimethyl-6-hydroxyocta-2,7-dienoyl]}-α-L-rhamnoside is compound I and compound II named hippophanone is a new compound were identified by MS and NMR. The method was efficient and convenient, which could be used for the preparative separation of flavone glycosides from H. rhamnoides L. seed residues.     

回配焦粉捣固炼焦试验研究

以某公司现行配煤方案为基础,研究回配焦粉替代瘦煤捣固炼焦时焦粉粒径和配比对焦炭质量的影响。结果表明,焦粉粒径大于0.2mm时不适合炼焦,焦粉粒径小于0.2mm时在配合煤黏结能力有富余的条件下适合炼焦,此时配入一定比例适宜粒径的焦粉对焦炭质量不会起到明显的劣化作用。     

DC Potentials Applied to an End-cap Electrode of a 3-D Ion Trap for Enhanced MS Functionality

The effects of the application of various DC magnitudes and polarities to an end-cap of a 3-D quadrupole ion trap throughout a mass spectrometry experiment were investigated. Application of a monopolar DC field was achieved by applying a DC potential to the exit end-cap electrode, while maintaining the entrance end-cap electrode at ground potential. Control over the monopolar DC magnitude and polarity during time periods associated with ion accumulation, mass analysis, ion isolation, ion/ion reaction, and ion activation can have various desirable effects. Included amongst these are increased ion capture efficiency, increased ion ejection efficiency during mass analysis, effective isolation of ions using lower AC resonance ejection amplitudes, improved temporal control of the overlap of oppositely charged ion populations, and the performance of "broad-band" collision induced dissociation (CID). These results suggest general means to improve the performance of the 3-D ion trap in a variety of mass spectrometry and tandem mass spectrometry experiments.     

One-Step Nucleic Acid Purification and Noise-Resistant Polymerase Chain Reaction by Electrokinetic Concentration for Ultralow-Abundance Nucleic Acid Detection

Nucleic acid amplification tests (NAATs)integrated on a chip hold great promise for point-of-care diagnostics. Currently, nucleic acid (NA) purification remains time-consuming and labor-intensive, and it takes extensive efforts to optimize the amplification chemistry. Using selective electrokinetic concentration, we report one-step, liquid-phase NA purification that is simpler and faster than conventional solid-phase extraction. By further re-concentrating NAs and performing polymerase chain reaction (PCR) in a microfluidic chamber, our platform suppresses non-specific amplification caused by non-optimal PCR designs. We achieved the detection of 5 copies of M. tuberculosis genomic DNA (equaling 0.3 cell) in real biofluids using both optimized and non-optimal PCR designs, which is 10- and 1000-fold fewer than those of the standard bench-top method, respectively. By simplifying the workflow and shortening the development cycle of NAATs, our platform may find use in point-of-care diagnosis.     

Comparative study of Co3O4-ZSM-5 catalysts synthesized by different hydrothermal methods for the catalytic oxidation of dichloromethane

In this work, various Co₃O₄-ZSM-5 catalysts were prepared by the microwave hydrothermal method (MH-Co₃O₄@ZSM-5), dynamic hydrothermal method (DH-Co₃O₄@ZSM-5), and conventional hydrothermal method (CH-Co₃O₄/ZSM-5). Their catalytic oxidation of dichloromethane (DCM) was analyzed. Detailed characterizations such as X-ray diffractometer (XRD), scanning microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET), H₂ temperature-programmed reduction (H₂-TPR), temperature-programmed desorption of O₂ (O₂-TPD), temperature-programmed desorption of NH₃ (NH₃-TPD), diffuse reflectance infrared Fourier-transform spectra with NH₃ molecules (NH₃-DRIFT), and temperature-programmed surface reaction (TPSR) were performed. Results showed that with the assistance of microwave, MH-Co₃O₄@ZSM-5 formed a uniform core-shell structure, while the other two samples did not. MH-Co₃O₄@ZSM-5 possessed rich surface adsorbed oxygen species, higher ratio of Co³⁺/Co²⁺, strong acidity, high reducibility, and oxygen mobility among the three Co₃O₄-ZSM-5 catalysts, which was beneficial for the improvement of DCM oxidation. In the oxidation of dichloromethane, MH-Co₃O₄@ZSM-5 presented the best activity and mineralization, which was consistent with the characterizations results. Meanwhile, according to the TPSR test, HCl or Cl₂ removal from the catalyst surface was also promoted in MH-Co₃O₄@ZSM-5 by their abundant Brønsted acid sites and the promotion of Deacon reaction by Co₃O₄ or the synergistic effect of Co₃O₄ and ZSM-5. According to the results of in situ DRIFT studies, a possible reaction pathway of DCM oxidation was proposed over the MH-Co₃O₄@ZSM-5 catalysts.