论民国时期贵州会道门的基本特征

民国时期,贵州会道门得到了快速发展.与明清时期相比,这一时期贵州会道门具有如下几个明显的特征:第一,名目繁多,信徒数量庞大;第二,分布地区广泛;第三,形成了一个纵横交错的会道门关系网络;第四,成员构成复杂;第五,组织结构更趋严密;第六,具有强烈的政治依附性.     

Experimental investigation of time-dependent cavitation in an oscillatory squeeze film

The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while the other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.     

Generation of Laser Light via Ultrasonic Four-wave Mixing

On the basis of the interaction between phonons in ionic crystals with anharmonic lattice vibration, we present a laser model on acoustic nondegenerate four-wave mixing. Two beams of highfrequency ultrasound, incident on the acoustic cavity fulfilled with the medium of ionic crystal, play the role of pumping and one of the two side-band modes of the pumping frequency as an acoustic signal mode has a strong interaction with the optical cavity mode, the coupling-out of which wiIl be the light (far-infrared) output of a laser. The problem is treated with quantum-mechanics. The theory shows that there is the threshold phenomenon as usual lasers and a so called phase-matching condition is derived, which should be satisfied for stability of the system.     

基于像散与理想光源成像原理的高亮度半导体激光器光纤耦合设计方法

运用像散原理和理想光源成像原理,讨论了半导体激光器消像散设计.提出了一种基于消像散的高亮度半导体激光器光纤耦合系统的设计方法.以波长为808 nm,输出功率为10 W的半导体激光器的光纤耦合为例,给出了详细的计算方法和设计步骤.结果表明:采用该方法将半导体激光器光束耦合入数值孔径为0.22,芯径为50 μm的光纤中,耦...     

地下室混凝土墙板裂缝的产生与防治

文章阐述了地下室工程裂缝的产生原因及特征，从设计、施工等方面提出了预防及其控制措施，并通过工程实例予以说明．     

工程边坡的稳定性分析及抗滑桩的应用研究

文章在采用传递系数法对边坡进行稳定性分析的基础上。对抗滑桩在边坡治理中的作用原理及其设计参数进行了研究。     

对中小学信息技术教学原则的探索

信息技术是一门在中小学新开设的课程，由于它的工具性和基础，使得它的教学与众不同，探索它的教学规律，探讨它的教学原则具有现实意义，本文从教学实践中总结出这么几条关于信息技术教学原则与同行商榷。     

半环的伪理想

通过对半环的子半环的条件进行加强,提出了半环的伪理想的概念.讨论了它们的基本性质,得到了一些相关的重要结论.     

层合中厚非圆截面柱壳的非线性动力响应

基于Timoshere-Midlin假设及Hamilton原理,建立了层合中厚非圆截面柱壳的非线性控制方程,将空间变量用三角级数和正交配点法离散,时间变量用Newmark-β法离散,用迭代法求解.以两端简支L曲线截面层合中厚柱壳为例,讨论了径厚比、截面形状参数、材料弹性杨氏模量比和横向剪切变形等因素对层合非圆截面柱壳非线性动力响应的影响,且与采用ANSYS软件所得仿真计算结果进行了比较.研究结果表明,径厚比、截面.形状参数和材料弹性杨氏模量比对层合非圆截面柱壳非线性动力响应的影响比较大.     

党的执政能力建设的政治学分析

执政能力是政党执政的基础性资源,在政治学意义上有着丰富的意蕴。增强执政能力,保持执政的有效性、合法性和稳定性是执政党的最高政治诉求。从政治学的视角,论证了中国共产党加强执政能力建设是巩固执政合法性基础、整合多元社会利益、构建和谐社会、促进政治发展和实现政治现代化的需要。