热丝CVD生长金刚石薄膜喇曼散射研究

本文报道热丝化学气相沉积法（ＨＦＣＶＤ）生长金钢石薄膜的喇曼散射结果。选取多种峰型，对金钢石薄膜喇曼谱（１１０－１８００ｃｍ－１）采用最小二乘法进行非线性拟合，得到最佳拟合模型，其计算得到的拟合曲线怀实验谱图符合得较好。该模型揭示，石墨Ｄ峰（１３５５ｃｍ－１）是金刚石薄膜喇曼谱中不可缺少的一个组份，并且结合石墨Ｄ峰和金刚石喇曼的空间相关线型，可以解释金刚石喇曼区特殊峰形的物理机制，拟合参量的进一步     

一种新型的渐变脊径向波导空间功率合成器设计

给出了一种新型的波导渐变脊的设计方法及其在波导空间功率合成器中的应用,该设计方法采用新型复合函数渐变曲线代替了传统的单一指数函数或三角函数渐变曲线,通过优化渐变脊的结构可以达到对频带内引起的谐振进行抑制的目的,并能降低功率合成器中的通路损耗;将该新型波导渐变脊结构用于30~40 GHz的波导空间功率合成器,经测试得到,由渐变脊组成的合成器部分在整个频段内插入损耗不足0.8 dB,整个无源合成器结构的输入端口驻波小于1.35,满足了合成器的使用要求。     

一类重心权Hermite有理插值的二阶导数收敛性

研究了一类特殊情形\left(m=\mathrm{1}\right)的重心权Hermite有理插值,证明了该插值函数的二阶导数r_{\mathrm{1}}^{″}\text{?}\left(x\right)在插值节点和非插值节点处分别以O\left(h^{\mathrm{2}d-\mathrm{1}}\right)和O\left(h^{\mathrm{2}d-\mathrm{3}}\right)的速度收敛于函数f^{″}\text{?}\left(x\right)。数值例子进一步验证了方法的有效性。     

使用不同工质的会切磁场等离子体推力器

会切磁场等离子体推力器是一种利用磁镜约束等离子体产生推力的新型推力器,具有寿命长、推力大范围连续可调等优点,在无拖曳控制领域具有较大的应用前景.分别采用Xe,Kr和Ar三种不同工质,开展了会切磁场等离子体推力器实验.首先,对所用的推力器进行了简要的原理和设计介绍;然后,对三种工质的点火电压分别进行了测试,发现Xe是最容易点火成功的,Kr和Ar点火难度较大.在阳极电流、推力、效率和比冲等性能方面,三种工质在同等条件下也存在明显的区别.分析发现,三者的工质利用率高低导致了性能上的差别,通过提升通流密度能够大幅提升Kr和Ar的工质利用率.在羽流结构方面,法拉第测量结果表明三者都存在明显的空心羽流,且离子电流密度峰值出现的角度随着原子量的减小而逐渐减小.     

环戊烯分子内价轨道1a′的电子动量谱学研究

报道了环戊烯（C₅H₈）分子1a′轨道的电子动量谱，并且给出了价 轨道的电离能谱信息 .实验在非共面对称几何条件下用能量多道型电子动量谱仪完成，入射电子的能量为1200 eV 加结合能.通过Hartree-Fock 和密度泛函方法计算得到了C₅H₈分子 1a′轨道的动量谱. 对1a′轨道的电子动量谱的实验值和理论计算进行了比较，得到了该轨道的极强度（pole s trength）的信息.     

Pose estimation for UAV aerial refueling with serious turbulences based on extended Kalman filter

In recent years, many pose estimation algorithms were developed, and have been successfully applied to solve unmanned aerial vehicle (UAV) aerial refueling pose estimation problems. This paper mainly focuses on solving this problem under serious turbulences circumstance. The extended Kalman filter is a set of mathematical equations to estimate the state of a process, which is able to support estimations of past, present, and even future states. In reference to previous papers and some simulations, we build up the noise models of refueling boom and atmospheric turbulence. Then, an extend Kalman filter is adopted to solve the pose estimation problem in UAV aerial refueling with serious turbulences. The experimental results demonstrate the feasibility and effectiveness of our proposed approach.     

新颖的微流控电调谐空间光开关

提出了一种微流控电调谐非机械空间光开关器件,该器件的基本形式为“光输入阵列+光交换空间+光输出阵列”的结构,采用“水/油/水”液体棱镜作为偏光控制单元.在特定电压范围（30~110 V）内,通过电润湿效应作用的液体棱镜光束偏转角可在约－15°~15°之间连续可调.由此可构造多种平面甚至立体光开关阵列.     

GC-FTIR和GC-MS联用在环状硫代碳酸酯混合物中的应用

采用GC-FTIR和GC-MS建立环状硫代碳酸酯和环状碳酸酯的分析方法.选用HP-5毛细管色谱柱(30m×320μm×0.25μm),分流比50∶1,进样量1μL,进样口起始温度120C,保持5min,升温速率15℃/min,进样口终止温度270℃.质谱采用EI源,选取Scan模式,扫描范围为50到550m/Z.结果表明GC-FTIR可鉴定出3种环状硫代碳酸酯,而GC-MS可同时鉴定出4种环状硫代碳酸酯.     

Generation of high power laser at 1314 nm from a diode-side-pumped Nd:YLF module

We demonstrate a high power continuous-wave （CW） and acoustic-optically （AO） Q-switched 1314-nm laser with a diode-side-pumped Nd：YLF module. A maximum CW output power of 21.6 W is obtained with a diode pump power of 180 W, corresponding to an optical-to-optical conversion efficiency of 12.0% and a slope efficiency of 16.1%. In the Q-switching operation, a highest pulse energy of 3.8 mJ is obtained at a pulse repetition rate of 1 kHz. The shortest pulse width and maximum single peak power are 101.9 ns and 37.3 kW, respectively.     

Effects of shaded facets on the performance of metal-coated etched diffraction grating demultiplexer

A finite-difference time-domain (FDTD) method combined with a periodic boundary condition is used to analyze the diffraction efficiency of an etched diffraction grating (EDG) demultiplexer coated with a metallic film at the backside. The numerical results show that the diffraction loss is mainly due to the scattering effect of shaded facets of a metal-coated grating at both the polarizations. However, the same shaded facets can produce a higher loss for a TM polarization than that for a TE polarization, which induces a higher polarization dependent loss (PDL) of the demultiplexer.