Electropolymerized m-phenylenediamine as a means to immobilize active protein on thickness-shear-mode quartz crystal

Electropolymerized m-phenylenediamine was used as an active coating for immobilizing urease and lectin on a gold-plated thickness-shear-mode (TSM) crystal. To enhance effectiveness of immobilization. a bilayer polymer film composed of polyaniline and poly-m-phenylenediamine was proposed. Compared with single poly-m-phenylenediamine film, the bilayer polymer film gave better results in terms of immobilizing capacity, stability and reproductivity. On this bilayer-film-coated TSM quartz crystal, the amount of immobilized lectin was estimated about 1.8 mug/cm(2). Detection of purified human erythrocytes is demonstrated as an example of potential application of this lectin-modified TSM biosensor in clinic.     

硕士研究生毕业论文评阅及其分析

通过对硕士研究生毕业论文进行客观评估,指出了研究生论文中表现出的一些共性问题,在此基础上提出了进一步提高研究生培养质量的若干建议。     

WC—Co硬质合金刀片热丝法金刚石薄膜涂层附着力

用热丝法研究了ＷＣ－６％Ｃｏ硬质合金刀片金刚石薄膜涂层附着力。结果表明：采用温度为８０℃,（ＨＣｌ：ＨＮＯ３：Ｈ２Ｏ）（体积比）为１∶１∶１溶液对硬质合金刀片表面去Ｃｏ１５ｍｉｎ后,经４０ｕｍ金刚石粉及１．５ｕｍ金刚石加２０ｕｍＴａＣ混合粉进行超声预处理,结果表明,沉积的金刚石薄膜与硬质合金刀片基底具有良好的附着力,而经４０ｕｍ金刚石粉处理的薄膜涂层组织与附着力要好一些。     

人工杉木林木材化学成分的变异规律

应用正交试验设计方法,系统分析了不同林龄,立地条件和林分密度下杉木人工林木材化学成分含量的变异规律。结果表明：影响人工杉木林木材化学成分含量的主导因子是林龄,其次是立地条件,林分密度影响最小。综合人工杉木林不同林龄,立地条件和林分上木材化学成分含量考虑,其纸浆材主伐年龄以１７－２３年左右较好。     

粒状FeCu纳米颗粒体磁性和磁粘滞性的研究

溶胶法制备了不同粒度的ＦｅＣｕ纳米颗粒体,Ｘ射线衍射（ＸＲＤ）确定了样品的相组成和颗粒的平均粒度,振动样品磁强计（ＶＳＭ）测量了样品在不同温度下的磁化曲线,磁滞回线,涨落场和有效激活体积．“趋近饱和定律”方法求出了样品的有效磁各向异性常数．利用均匀反磁化模型计算了样品的矫顽力,计算值与测量值基本相符．结果表明,样品的激活体积随颗粒体积的增大而增大,激活体积与颗粒的平均体积的大小基本属于同一数量级,粒状ＦｅＣｕ纳米颗粒的反磁化基本符合均匀反磁化．     

具有全氟丁基磺酰亚胺基侧链的聚磷腈的合成

本文合成了一种新的具有全氟丁基磺酰亚胺基侧链的聚磷腈高分子。并用¹H NMR、 ¹⁹F NMR、 IR光谱、凝胶渗透色谱以及热重分析等方法, 对其结构和性质进行了表征。     

Crystal structure and luminescence property of ternary terbium p-aminobenzoic acid complexes with different second ligands

Ternary terbium complexes with p-aminobenzoic acid (HL), [TbL₃(DMSO)(H₂O)]₂ (1), [TbL₃(DMF)(H₂O)]₂ (2) and [TbL₃(Bpy)(H₂O)]₂·2H₂O (3) (DMSO=dimethyl sulfoxide, DMF=N, N- dimethylformamide, Bpy=2, 2′- bipyridyl) have been synthesized, and their crystal structures determined. The luminescence properties of these complexes, including both the emission quantum yield and the fluorescence lifetime, have been investigated. The effect of a second ligand on the crystal structure and luminescence property of the ternary terbium p-aminobenzoic acid complexes, and the relationship between luminescence properties and crystal structure, including coordination mode of the L⁻ ligand and the characteristics of a second ligand, are discussed.     

A nonlinear regression model applied to kinetic studies of ester hydrolysis with a surface acoustic wave sensor

A non-linear regression model was derived for the simultaneous determination of the rate constant in alkaline hydrolysis of esters and the initial concentration of esters based on the linear relationship between the frequency response of the surface acoustic wave sensor system and the conductivity of the solution. The model was tested theoretically and experimentally with the methyl-, ethyl-, and n-propyl-acetate systems. The corresponding rate constants estimated at 25 degrees C are 0.147, 0.103 and 0.0671 respectively.     

Alloyed semiconductor quantum dots: tuning the optical properties without changing the particle size

Alloyed semiconductor quantum dots (cadmium selenium telluride) with both homogeneous and gradient internal structures have been prepared to achieve continuous tuning of the optical properties without changing the particle size. Our results demonstrate that composition and internal structure are two important parameters that can be used to tune the optical and electronic properties of multicomponent, alloyed quantum dots. A surprising finding is a nonlinear relationship between the composition and the absorption/emission energies, leading to new properties not obtainable from the parent binary systems. With red-shifted light emission up to 850 nm and quantum yields up to 60%, this new class of alloyed quantum dots opens new possibilities in band gap engineering and in developing near-infrared fluorescent probes for in vivo molecular imaging and biomarker detection.     

Analyzing functional similarity of protein sequences with discrete wavelet transform

This paper applies discrete wavelet transform (DWT) with various protein substitution models to find functional similarity of proteins with low identity. A new metric, 'S' function, based on the DWT is proposed to measure the pair-wise similarity. We also develop a segmentation technique, combined with DWT, to handle long protein sequences. The results are compared with those using the pair-wise alignment and PSI-BLAST.