Ligand Exchange Between Penta-Coordinated Phosphoryl Serine and Histidine Compounds

With the assistance of HPLC-ESI-MS/MS, the self-assembly products of serine and histidine penta-coordinated phosphorus compound were separated and identified. The expectative product was seryl-histidine dipeptide, but it was found that there was almost equimolar amount of histidyl-histidine dipeptide as well as seryl-histidine dipeptide. The mechanism was speculated that there was iigand exchange between penta-coordinated phosphoryl serine and histidine in the reaction process. As a result,two types of dipeptide were produced.     

K3Na5(H2NCH2CH2NH3)2{(VO)12O6[B3O6(OH)]6}(H2O)•12H2O的合成与晶体结构

利用水热合成技术成功制备出一种新型多钒硼氧化合物， 用X射线单晶衍射分析技术对其晶体结构和分子结构进行了确定。结果表明在该化合物中多钒硼氧阴离子具有一个新颖的三明治结构。上下两个结构单元都是由六个VO₅四角锥交替地通过顺式和反式共边的方式连接起来构成的一个钒氧三角形结构。中间的结构单元是由BO₃平面三角形和BO₄四面体以共角的方式相互连接形成的一个折叠型的B₁₈O₃₆(OH)₆环。三明治结构中层与层之间通过桥氧相连。一个水分子处于它的核心位置上，与每个VO₅四角锥中的钒原子都保持几乎相等的距离。该化合物及其晶体中存在着丰富的化学结构和成键信息，同时也有作为氧化还原反应催化剂的潜能。     

取代基对卟吩结构和性质的影响

运用密度泛函理论(DFT) B3LYP/6-31G(d, p)方法, 对卟吩及其被取代基—CH=CH₂、—COCH₃、—CHOHCH₃、—CHNH₂CH₃或—CHSHCH₃所修饰后的分子构型进行了优化. 同时, 对其电子吸收光谱与核磁共振氢谱也进行了量化计算. 结果表明, 这些取代基有着各自不同的空间构象, 对卟吩环的整体结构没有很大的扰动. 然而, 它们重新调整了卟吩环中原子电荷的分布, 改变了前线分子轨道(LUMO-HOMO)能隙, 结果导致卟吩的吸收光谱与¹H NMR均发生了相应的改变.     

WxC-MCM-48催化剂的合成、表征及加氢脱硫催化性能

以正硅酸乙酯(TEOS)为硅源，十六烷基三甲基溴化铵(CTAB)为表面活性剂，仲钨酸铵为钨源，采用水热晶化法一步合成了不同钨含量(以Si、W物质的量比n_Si/n_W表示)的WO₃-MCM-48，然后经甲烷/氢气(V/V=1/4)混和气体程序升温还原碳化(TPC)，制备出了W_xC-MCM-48(x=1、2)催化剂，采用XRD、N₂吸附-脱附和NH₃-TPD对样品的结构进行了表征，用噻吩作为模型化合物，对W_xC-MCM-48催化剂的加氢脱硫催化活性进行了评价。结果表明，在一定钨含量的条件下，WO₃-MCM-48和W_xC-MCM-48样品仍然保持MCM-48的三维立方有序介孔结构，n_Si/n_W=30～15时，碳化钨的物相为W₂C；n_Si/n_W=7.5时，碳化钨为W₂C和WC物相，W_xC-MCM-48催化剂表现出了良好的加氢脱硫催化性能。     

不同构象铂(Ⅱ)配合物与G-肌动蛋白作用的光谱研究

The cyclohexamethylene-diamine squaric acid platinum(Ⅱ) complexs(R,R, S,S) binding to G-actin and the consquence conformation change were studied by N-(1-pyrenyl) maleimide(NPM) labeled fluorescence and intrinsic fluorescence. The binding and chemical kinetics were determined by fluorometry. The results showed that when R (Pt/actin molar ratio) was lower than 30, the Pt binded to G-actin strong binding sites(-SH), when R was larger than 30, the Pt binded to G-actin weaker binding sites. The consquence conformation changes were determined by CD. The CD results showed that R was smaller than 60, G-actin α-helix contents decreased slowly, R was larger than 60, G-actin conformation changed obviously. The reaction of R,R complex of platinum(Ⅱ) S,S complex of platinum(Ⅱ) with G-actin was similar to that of with S,S complex of platinum(Ⅱ).     

Synthesis of diethers derived from furoin by phase transfer catalysis under microwave irradiation

A series of new diethers were obtained by alkylation of furoin under microwave irradiation (MWI) in phase transfer catalysis (PTC) conditions. The products of alkyl halides were synthesized in good yields (>75%) within a few minutes, and the products of dihalides were synthesized in fair yields (about 45%). The yields are dramatically improved compared to conventional heating under the same conditions, in spite of similar profiles of rising in temperature.     

Propane fuel cells using phosphoric-acid-doped polybenzimidazole membranes

Propane fuel cells using H(3)PO(4)-doped polybenzimidazole polymer membranes produce low and unsustainable current densities at temperatures up to 250 degrees C under anhydrous conditions. Stable intermediate species blocked the surface of noble metal anode catalysts, and the intermediate species could not react further into desorbable final products. In contrast, when water was introduced by light humidification (S(r) 0.08%) of the propane stream, sustainable and higher current densities were achieved. Water participated in the reaction sequence to form surface-bound hydrocarbon and then oxygen-containing intermediates and thereby generated CO and CO(2) as the only carbon-containing products.     

用石英晶体微天平研究表面活性剂在银固态表面上的动态吸附

吸附是表面活性剂的一个重要特征.迄今用于原位监测表面活性剂在固体表面上吸附重量变化的方法尚不多见.近年来压电石英晶体作为一种高灵敏的质量传感器(石英晶体微天平)已被用于大气和溶液中多种微量成分的监测.用石英晶体微天平研究I~-、Br~-和表面活性剂在金电极上的吸附行为亦有报道.本文研究了十六烷基三甲基溴化铵(CTAB)、十二烷基磺酸钠(SDSO)、十二烷基硫酸钠(SDS)在银固态表面上的吸附平衡动力学特性及其吸附机制.     

五氯化磷辅助下氨基酸的自组装成肽反应研究

L-α-氨基酸和D-α-氨基酸可与五氯化磷直接发生磷酰化反应，随后自组装成多肽，但β-氨基酸不能成肽，DL-α-氨基酸成肽困难；在SOCl2存在下，α-氨基酸也不能成肽，用电喷雾质谱研究了氨基酸的自组装反应，反应过程中有五元环状的氨基酸五配位磷中间体生成，使用硅烷基保护的氨基酸，在^31PNMR中可观察到五配位磷中间体。     

Effect of reaction media on the growth and photoluminescence of colloidal CdSe nanocrystals

Using cadium oxide (CdO) as the Cd precursor and tri-n-octylphosphine selenide (TOPSe) as the Se source, TOP-capped and TOP/tri-n-octylphosphine oxide (TOPO)-capped CdSe nanocrystals were synthesized without the use of an acid. The synthetic approach involved the addition of a TOPSe/TOP solution into a CdO/TOP solution with or without TOPO at one temperature and subsequent growth at a lower temperature. The temporal evolution of the optical properties, namely, absorption and luminescence, of the growing nanocrystals was monitored in detail. A comprehensive examination on the control of the photoluminescence (PL) properties was performed by systematically varying the TOP/TOPO weight ratio of the reaction media. Surprisingly, a rational choice of 100% TOP or 80% TOP was found to produce "quality" nanocrystals when monitored under the present experimental conditions and growth-time scale. The term "quality" is mainly based on the sharp features and rich substructure exhibited in the absorption spectra of the growing nanocrystals, as well as the sharp features in the emission spectra with narrow full width at half-maximum (fwhm). There are two distinguishable stages of growth: an early stage (<5 min) and a later stage. TOP plays a major role in the control of a slow growth rate in the early stage, while TOPO controls slow growth in the later stage. The optical sensitivity of the growing nanocrystals when dispersed in nonpolar or polar solvents was studied, including two size-dependent parameters, namely, the solvent sensitivity (PL intensity) and nonresonant Stokes shift (NRSS). The insights gained from the present study enable a synthetic approach in which high-quality CdSe nanocrystals are achieved with high synthetic reproducibility.