GIF S-亚硝基化的一些见解

Neural growth inhibitory factor （GIF）, a member of metallothionein family （metallothionein-3, MT3）, was well known by its distinct neural growth inhibitory activity, which is not shown by other MT isoforms. However, till now, people still did not know clearly how GIF exerts its biological functions. Since it has been reported that GIF might serve as NO scavenger and was related to the release of zinc, our study was focused on the interaction of GIF and NO. By studying the reactions of human GIF and human MTlg with SNOC-a type of NO donor, it was found that GIF was more reactive than MT-lg toward SNOC. In order to further figure out if the high reactivity of GIF in this reaction resulted from the acid-base catalysis, several mutants were constructed： E23K, E41G/E43A, E23K/E41G/E43A. By studying their basic properties and the reactions toward SNOC, it was found that the S-nitrosylation of GIF was not only related to the acid-base catalysis, but also to the accessibility of metal-thiolate clusters.     

12兆瓦热电气多联产装置的开发

介绍了为解决某钢铁企业的中热值煤气，蒸汽和电的短缺而开发的一台12MW的热电气多联产装置，在该系统中，把一台流化床气化炉和一台75t/h循环流化床锅炉结合在一起，从而实现煤气和蒸汽联产，在详细介绍了该装置的设计思想和结构特点的同时，用所建的热电气多联产模型对该装置包括煤气产量，煤气成分，煤气热值和系统运行温度等在内的性能参数进行了预测。     

三(2-氨基乙基)胺-镉(Ⅱ)-2-甲基咪唑三元配合物的合成、结构与抗微生物活性

The complex [Cd(tren)(meim)](ClO₄)₂ was synthesized and characterized by elemental analysis, IR and X-ray single-crystal diffraction. The compound crystallizes in monoclinic system, space group P2₁/m with a=0.786 8(2) nm, b=0.834 2(2) nm, c=1.496 2(4) nm, M_r=538.64, Z=2, F(000)=542, D_c=1.822 g·cm^-3, T=298(2) K, μ=1.435 mm^-1 and λ=0.071 073 nm. The structure was refined to R=0.045 8 and wR=0.123 1 for 1 489 observed reflections with I>2σ(I). The complex was valued for its antimicrobial activity against bacterial strands using the agar diffusion method. It was found to be active against the four test bacterial organisms. CCDC: 600198.     

甲基丙烯酸-3-三甲氧基硅丙酯/苯乙烯共聚乳胶粒微结构

我们曾制备了核-壳结构的杂化乳胶粒, 并用溶剂将核去除得到杂化空心微胶囊. 但由于此乳液聚合过程十分复杂, 在不同条件下反应得到乳胶粒的微结构有较大不同, 目前尚未见到各反应条件下所得产物微结构的表征和形成机理的研究报道. 本文将系统分析在不同反应条下, MPS和St种子乳液聚合过程中, 得到的乳胶粒壳层杂化聚合物的微结构, 并研究了其形成原因.     

Highly Enantioselective Phenylacetylene Addition to Benzaldehyde Catalyzed by Chiral Tridentate Ligand

Development of new or improved methods for the asymmetric preparation of chiral propargylic alcohols has gained considerable significance during the past years because they are useful building blocks for the synthesis of many biologically active compounds and natural products.[1] A series of chiral tridentate ligands were conveniently synthesized from amino acids with good yields (Scheme 1).[2] A preliminary study of the enantioselective alkynylation of benzaldehyde catalyzed by this chiral tridentate ligand was carried out and up to 83% ee of chiral propargyl alcohols was obtained (Table 1 ). A further investigation of the tridentate ligand is currently underway.     

哒嗪酮类α1-肾上腺素受体拮抗剂的合成和生物活性研究

将苯(氧)乙胺和苯氧烷胺类α₁-肾上腺素受体拮抗剂中的苯(氧)乙胺、苯氧烷胺片段引入哒嗪酮类化合物中, 设计、合成了30个新的含哒嗪酮环的α₁-肾上腺素受体拮抗剂. 所有新化合物的结构均经¹H NMR, IR, HRMS确证. 生物活性测试表明28个目标物对α₁-肾上腺素受体有较好的拮抗作用(pA₂＞6.00), 化合物6o, 6p, 6q, 6v, 6x, 6y, 10c, 10d的pA₂值＞7.00.     

超临界苯类溶剂对聚苯乙烯降解的影响

在高压间歇反应器中,温度340~370℃,以苯、甲苯、乙苯和对二甲苯为超临界溶剂研究了聚苯乙烯(PS)的降解特性.苯类物质是聚苯乙烯的优良溶剂,在超临界条件下其优异的传质、传热性能使聚苯乙烯快速降解.聚苯乙烯在不同超临界溶剂中降解转化率相近,而降解产物组成差别很大,分析了不同超临界溶剂对聚苯乙烯降解过程的影响.结果表明超临界甲苯对降解过程影响最小,苯乙烯收率最高.聚苯乙烯降解过程中,高分子链断裂和解聚同时进行,结合连续分布理论建立了聚苯乙烯降解的动力学模型,得到在超临界甲苯中聚苯乙烯链端解聚活化能为138.4 kJ.mol-1.     

明矾石-石膏复合膨胀剂

对以明矾石和石膏两种原料复合的膨胀剂进行了配方优化和水泥净浆膨胀掺加量试验研究。通过对试样的SEM和XRD进行分析简要探讨了AG复合膨胀剂的膨胀机理。     

曝气生物流化床处理炼油厂含硫和高氨氮污水的研究

炼油厂含硫污水因含高浓度的油、COD、硫化物及挥发酚而难于生化降解，催化剂生产中排放的污水因含高浓度的氨氮、盐类、悬浮物质以及低浓度的有机物而成为水处理的难题．本文采用一种曝气生物流化床（ABFT）工艺，对含硫污水和催化剂高氨氮污水的混合污水进行了现场连续试验，结果表明：在混合污水COD为2090mg／L、氨氮为600mg／L、挥发酚为27mg／L和硫化物为154mg／L的情况下，ABFT系统出水COD为95mg／L、氨氮为4．0mg／L、挥发酚为0．30mg／L和硫化物为0．0067mg／L，出水达到了国家污水排放标准一级标准．在处理工艺中，动态氧化和混凝沉淀作为预处理，ABFT反应器采用了合成高分子载体固定化微生物技术，该载体具有大孔网状以及优良的机械强度和化学性能，高效微生物B350通过化学键固定在载体上．克氏定氮法表明，ABFT中生物负载量为32mg／L．试验结果显示：在处理高氨氮污水方面，ABFT工艺比SBR工艺具有更强的优势，同时，ABFT系统具有较高的处理效率和耐冲击负荷能力．     

金属针布淬火过程中火焰加热温度场的计算机模拟

应用三维有限元方法对金属针布的火焰淬火加热进行了研究。将实验测量与人工神经网络建模技术相结合，建立了火焰加热工件表面热流密度的计算模型，解决了三维有限元求解中边界条件的设定问题。用有限元方法求解三维固体热传导的Fourier方程，模拟计算了金属针布火焰快速加热时的温度场变化，计算结果与实测吻合较好。