Investigation of Ti/TiN multilayered films in a reactive mid-frequency dual-magnetron sputtering

Influence of the process parameters like (i) sputtering gas pressure, (ii) target current, (iii) substrate bias voltage and (iv) substrate temperature of a reactive mid-frequency dual-magnetron sputtering on (a) surface defects and (b) mechanical properties of Ti/TiN multilayered films was investigated. The forming mechanisms of the observed droplets and craters were analyzed. Results showed when: (1) pressure of Ar/N₂ gases PAr/N₂ was at 0.31 Pa and substrate temperature was in certain range, the size and the density of the surface defects on the TiN films tended to decrease with increasing the target current and the pulsed bias voltage; (2) the optimal deposition parameters for accomplishing fewer surface defects were used, increasing the thickness of the Ti buffer layer decreased the microhardness in certain level, and the adhesion was firstly increased and then decreased as thickness reaching and/or beyond a critical value. Results also showed that selection of optimized process parameters evidently minimized the surface defects and improved the mechanical properties of the film.     

The <Emphasis Type="Italic">q</Emphasis>-Analogues of Squeezed States and Some Properties

In this paper we shall introduce two q-analogues of the squeezed states in terms of the technique of integration within an ordered product of operators and the properties of the inverses of q-deformed annihilation and creation operators, and some nonclassical properties of the states are examined. Furthermore, we obtain some new completeness relations composed of the bra and ket which are not mutually Hermitian conjugate. PACS numbers: 03.65.-w; 45.50.Ct. Work supported by the National Natural Science Foundation of China under Grant 10574060 and the Natural Science Foundation of Shandong Province of China under Grant Y2004A09.     

Structure Stability of LaAlO3 Thin Films on Si Substrates

A series of amorphous and single-crystalline LaAlO3 （LAO） thin films are fabricated by laser molecular-beam epitaxy technique on Si substrates under various conditions of deposition. The structure stability of the LAO films annealed in high temperature and various ambients is studied by x-ray diffraction as well as high-resolution transmission electron microscopy. The results show that the epitaxial LAO films have very good stability, and the structures of amorphous LAO thin films depend strongly on the conditions of deposition and post-annealing. The results reveal that the formation of LAO composition during the deposition is very important for the structure stability of LAO thin films.     

二价金属元素掺杂对LiCoO2体系电子输运性质的影响

为了解释Ca掺杂与Mg掺杂在影响锂离子二次电池正极材料LiCoO2体系电子输运性质方面的不同效应,采用基于密度泛函理论的第一性原理方法研究了该体系的电子结构.计算结果表明,虽然在LiCoO2体系中用Ca或Mg替代Co都会在费米能级附近产生部分占据的受主带,但两者对应的电子态都具有明显的局域化特征;此外,与Mg掺杂体系明显不同的是,Ca掺杂体系的受主带与价带之间存在清晰的带隙.这一带隙的存在正是Ca掺杂不能明显提高LiCoO2体系电导率的主要原因.此外,Ca2+与Mg2+离子半径的较大差别也是造成这两个掺杂体系的电导率存在明显差异的一个重要因素.     

Accurate measurement of the main refractive indices and thermo-optical coefficients of the calcite crystal

The main refractive indices of calcite crystal are measured by the means of auto-collimation, and the thermo-optical coefficients are calculated. The coefficient expression of Sellmeier equation is obtained by solving Sellmeier equation strictly and the refractive indices of different wavelengths are calculated, which accord with experimental esultsery well. The measured main refractive indices of calcite at 488-nm wavelength are identical with the values obtained by Sellmeier equation.     

High repetition rate, compact micro-pulse all-solid-state laser

A high repetition rate, compact micro-pulse all-solid-state laser is designed. The diffusion bonded crystal of YAG, Nd:YAG, and Cr4+:YAG is taken as a monolithic cavity. The optimized initial transmission,output coupling, and pumping size of Cr4+:YAG are calculated. The experimental results show that the laser satisfies the requirement of a spaceborne laser range finder.     

Passively Q-switched Nd:GdVO4 laser with In0.25Ga0.75As being an output coupler

We report a diode-end-pumped passively Q-switched Nd:GdVO₄ laser operating at 1.06 μm with In_0.25Ga_0.75As being the saturable absorber as well as an output coupler. Q-switched pulses with a pulse duration of 20 ns, pulse energy 4.2 μJ and pulse repetition rate 200 kHz were produced, corresponding to peak power of 210 W.     

Ag/Cu(111)与Au/Cu(111)体系异质外延岛演化过程中的应变释放及其对Moiré结构形成的影响

采用嵌入原子方法的原子间相互作用势，利用分子动力学模拟方法研究了Au/Cu(111)和Ag/Cu (111)体系的异质外延结构特征以及外延岛形貌和应变释放的演化过程. 通过对比Au/Cu(111)和Ag/Cu (111)体系的异质外延结构及外延岛演化行为，揭示了导致Ag/Cu (111)体系中异质外延层形成Moiré结构的微观物理机理及其与外延体系的宏观物理特性之间的关系. 研究结果显示，外延岛原子与基体表面原子之间的界面结合强度是形成Moiré结构的重要因素，异质外延体系的界面结合强度取决于二者的合金熔解热. 当异质外延体系的合金熔解热为正值时，界面结合强度较弱，有利于Moiré结构的形成. 同时，外延岛原子之间的相互作用决定着外延岛的面内弛豫行为，对Moiré结构的形成有一定的影响. 外延岛的面内弛豫行为与外延层和基体之间的相对刚度有关，弹性模量较大的外延层具有较强的延展能力，对Moiré结构的形成有利. 此外，Moiré结构的形成与外延岛的尺度有关，主要是外延岛边界原子的钉扎作用对外延岛内原子弛豫行为的约束作用的影响.     

基于无源性的定子磁场定向感应电机控制器

根据无源性控制的基本思想,并借鉴定子磁场定向控制理论,以定子磁场定向同步坐标系下的定子电流和定子磁通作为系统的状态变量,构建了一种新的电压源型混合控制器,并给出了系统的稳定条件.在理论分析的基础上,证明了在互联与阻尼分配的基于无源性的感应电机控制器设计方法中,将模型表达为欧拉方程的形式是不必要的,且动态解耦条件的数学描述约束过于严格.仿真和实验结果验证了该混合控制器的稳定性、有效性以及良好的静动态性能,同时提出的结论也由此得到了证明.     

基于单个CCⅡ+实现的单输入二输出二阶滤波器

提出一种仅仅用一个电流传器（CCⅡ＋）实现的单输入二输出二阶电流模式滤波器电路。该电路由一个电流传器（CCⅡ＋）、两个电容、三个电阻构成，它能实现二阶低通、带通滤波函数。本文分析了该电路的电流传输函数，并用PSPICE对该电路进行了仿真。仿真结果表明，该电路设计正确，电路结构简单，所用元器件少。