Charge density study under high pressure

The experimental and analytical method of the high-pressure powder experiment at BL10XU, SPring-8, is described. There is no doubt that BL10XU must be one of the most appropriate beam lines for high pressure X-ray diffraction experiment taking advantage of third generation synchrotron source. As an example of the advanced charge density study under high pressure, the structural change of Cs₂Au₂Br₆ by applying pressure is studied by Rietveld/MEM analysis. It reveals that the structural change of Cs₂Au₂Br₆ by applying pressure occurs basically at electron level, such as valence state change and chemical bonding, which may be called the electronic phase transition.     

Fluoro-Compounds in Electrolytes for Energy Storage Devices

1 Results Electrochemical energy storage devices such as lithium-ion batteries[1-2] and double-layer capacitors[3-4] have attracted a great deal of attention because of their potential application to electric hybrid vehicles. They utilize nonaqueous electrolyte solutions comprising from organic solvents and lithium or quaternary ammonium salts with fluorine-containing anions. This is because the relatively large anions with electron-withdrawing atoms enable ionic dissociation in dipolar aprotic solvents...     

Copolymers containing a spiro orthoester moiety that undergo no shrinkage during cationic crosslinking

A spiro orthoester with an exomethylene group (exoSOE) was radically copolymerized with acrylonitrile or vinyl acetate at several feed ratios to obtain the corresponding copolymers having spiro orthoester moieties in the side chain. The obtained copolymers could be crosslinked via the double ring‐opening polymerization of the spiro orthoester moieties in their side chain by a treatment with BF₃OEt₂. The volume changes upon the crosslinking of the copolymers were evaluated by density measurements with a micromeritics gas pycnometer. The copolymers experienced less than 1% volume expansion instead of volume shrinkage during typical cationic crosslinking, regardless of the copolymer compositions. Negligible shrinkage was observed during the thermal cationic crosslinking of a film cast from a nitrobenzene solution of the copolymers containing a benzylthiophenium salt as a thermally latent cationic initiator. The constantly low volume changes during the crosslinking of the copolymers from exoSOE probably depended on the almost zero volume change during the cationic polymerizations of spiro orthoester derivatives. This indicates that exoSOE is an effective monomer for crosslinkable polymers without volume changes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3666–3673, 2006     

Preparation and properties of isobutylene–isoprene rubber–clay nanocomposites

Isobutylene isoprene rubber (IIR)‐clay nanocomposites have been prepared successfully by melt intercalation with maleic anhydride‐grafted IIR (Ma‐g‐IIR) and organophilic clay. In IIR‐clay nanocomposites, the silicate layers of the clay were exfoliated and dispersed into the monolayer. The nanocomposites exhibited greater gas barrier properties compared with those of Ma‐g‐IIR. When 15 phr clay was added, gas barrier properties were 2.5 times greater than those of Ma‐g‐IIR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1182–1188, 2006     

Synthesis of copolymers containing a spiro orthocarbonate moiety and evaluation of the volume change during their cationic crosslinking

Spiro orthocarbonate (SOC) monomers having either an exomethylene group {3,3‐dimethyl‐9‐methylene‐1,5,7,11‐tetraoxaspiro[5.5]undecane (ExoSOC)} or an allyl group {9‐allyl‐3,3‐dimethyl‐1,5,7,11‐tetraoxaspiro[5.5]undecane (AllylSOC)} were radically copolymerized with vinyl monomers at several feed ratios to obtain the corresponding copolymers having SOC moieties in the side chain. The obtained copolymers were crosslinked via the double ring‐opening polymerization of the SOC moieties by a treatment with boron trifluoride etherate. The volume changes during the crosslinking of the copolymers were evaluated by density measurements with a gas pycnometer. As the SOC moiety composition increased, the volume shrinkage during the crosslinking was suppressed, and that finally changed into volume expansion. The volume changes during the crosslinking of the copolymers from AllylSOC were slightly larger than those of the copolymers from ExoSOC. The higher volume expansions in the crosslinking of AllylSOC‐based copolymers were ascribable to the lower steric hindrance around the SOC moieties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7040–7053, 2006     

Preparation and certification of the new reference materials; plastics (disk form, JSAC 0621-0625) for determination of mercury using x-ray fluorescent analysis.

The Japan Society for Analytical Chemistry has developed some new plastic certified reference materials (CRMs) for the analysis of mercury in polyester disks using XRF analysis. These CRMs (named as JSAC 0621-0625) were prepared by casting polyesters including a toluene solution of organometallic compounds as a standard. Concentrations of the five levels of mercury ranged from 0 to 250 mg/kg. Homogeneity tests of prepared disks had shown excellent results. Interlaboratory comparison study for the certification was performed by 15 laboratory participants. The z-scores in robust statistical method was applied for the evaluation of outliers. The certified values were assigned after discarding outliers. The uncertainties of certified values were determined as the confidence levels of 95%.     

A generalization of the katona theorem for crosst-intersecting families

LetX be ann-element set and letA and? be families of subsets ofX. We say thatA and? are crosst-intersecting if |A ∩ B| ≥ t holds for all A ∈A and for allB ∈ ?. Suppose thatA and ? are crosst-intersecting. This paper first proves a crosst-intersecting version of Harper's Theorem:

1. There are two crosst-intersecting Hamming spheresA ₀,? ₀ with centerX such that |A| ≤ |A ₀| and|?| ≤ |? ₀| hold.
2. Suppose thatt ≥ 2 and that the pair of integers (|A) is maximal with respect to direct product ordering among pairs of crosst-intersecting families. Then,A and? are Hamming spheres with centerX.

Using these claims, the following conjecture of Frankl is proven:

1. Ifn + t = 2k ? 1 then |A| |?| ≤ max \(\left\{ {\left( {K_k^n + \left( {_{k - 1}^{n - 1} } \right)} \right)^2 ,K_k^n K_{k - 1}^n } \right\}\) holds, whereK _l ⁿ is defined as \(\left( {_n^n } \right)\left( {_{n - 1}^n } \right) + \cdots + \left( {_l^n } \right).\)
2. Ifn + t = 2k then |A| |? ≤ (K _k ⁿ )² holds.

The extremal configurations are also determined.     

Chiral β-dimethylaminoalkylphosphines. Highly efficient ligands for a nickel complex catalyzed asymmetric grignard cross-coupling reaction

Chiral β-dimethylaminoalkylphosphines were prepared starting with amino acids, (S)-alanine, (S)-phenylalanine, (R)-phenylglycine, (S)-valine, and (R)-tert-leucine. The chiral phosphines were found to be highly efficient ligands for a nickel catalyzed asymmetric Grignard cross-coupling reaction (38～94% optical yield).     

Photochemically generated silicon-carbon double-bonded intermediates VIII. Photolysis of phenyldisilane derivatives in the presence of olefins

Photolysis of phenylpentamethyldisilane, 1,1-diphenyltetramethyldisilane and 1-isopropyl-1-phenyltetramethyldisilane in the presence of a wide variety of olefins has been studied. All reactions investigated, with the exception of those with 1-methylcyclohexene and tetramethylethylene, afforded the corresponding 1/1 addition products. Yields of the adducts depended highly on the structure of the olefins used. In the photolysis of phenylpentamethyldisilane in the presence of an equimolar mixture of 1,1- and 1,2-bis(trimethylsilyl)ethene under competitive reaction conditions, the main product was the one arising from the 1,1-isomer. A possible mechanism for the process of addition of olefin to the photochemically generated silicon-carbon double-bonded intermediate (A) is discussed.     

Silicon hydrides and nickel complexes : III. Hydrosilylation of olefins with dichloro[1,2-bis-(dimethylphosphino)-1,2-dicarba-closo-dodecaborane]-nickel(II) as catalyst

The hydrosilylation of olefins catalyzed by nickel(II) chloride complexed with 1,2-bis(dimethylphosphino)-1,2-dicarba-closo-dodecaborane produces terminal and internal adducts in comparable amounts. This unusual feature of the reaction is explained in terms of the electron-accepting nature of the carboranyl group.