Quantization of spin direction for solitary waves in a uniform magnetic field

It is known that there are nonlinear wave equations with localized solitary wave solutions. Some of these solitary waves are stable (with respect to a small perturbation of initial data) and have nonzero spin (nonzero intrinsic angular momentum in the center of momentum frame). In this paper we consider vector-valued solitary wave solutions to a nonlinear Klein-Gordon equation and investigate the behavior of these spinning solitary waves under the influence of an externally imposed uniform magnetic field. We find that the only stationary spinning solitary wave solutions have spin parallel or anti-parallel to the magnetic field direction.     

Structural characterization of β-V2O5 films prepared by DC reactive magnetron sputtering

β-V₂O₅ films were successfully prepared on silicon substrates by direct current (DC) reactive magnetron sputtering. X-ray diffraction (XRD), Raman spectra and field emission scan electron spectroscopy (SEM) were used to characterize the samples. Results revealed that the deposition temperature significantly influenced on the crystal structure of V₂O₅ films in the growth process. When the deposition temperature was below 500 °C, the sputtered film exhibited the α-V₂O₅ structure. However, β-V₂O₅ film was successfully obtained at 550 °C. High deposition temperature might provide V and O ions high mobility and energy in the reactive sputtering process, which induced the metastable β-V₂O₅ phase formed. The thermal stability of β-V₂O₅ film was studied by micro-Raman spectroscopy. The structure of sputtered β-V₂O₅ film was unstable under high temperature conditions (beyond 500 °C).     

Residual microstructure associated with impact craters in TiB2/2024Al composite

Residual microstructures associated with hypervelocity impact craters in 55 vol.% TiB(2)/2024Al composite were investigated by transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). TiB(2)-Al interface, TiB(2) particles and Al matrix before and after hypervelocity impact were compared to discuss the effect of hypervelocity impact. A new Al(x)O(1-x) phase with the fcc structure and the crystal parameter of 0.69 nm was formed at TiB(2)-Al interface. Stacking fault with width of 10-20 nm was formed along the (001) plane of TiB(2) particle. Formation of nanograins (≈ 100 nm) was observed within Al matrix, moreover, lamellar S' phase was transformed into lenticular or spherical S phase after hypervelocity impact.     

Growth, Characterization and Theoretical Study of a Novel Organometallic Nonlinear Optical Crystal: CdHg(SCN)4(C2H5NO)2

A novel potentially useful second harmonic generation (SHG) organometallic nonlinear optical (NLO) crystal: cadmium mercury thiocyanate bis(N-methylformamide), CdHg(SCN)₄(C₂H₅NO)₂ (CMTN), has been prepared, and large high-optical-quality single crystals with dimensions up to 30 ×27×9 mm³ have been grown by the temperature-lowering method. Its structural, physicochemical and optical properties are characterized by elemental analyses, X-ray powder diffraction, Fourier transform infrared and Raman spectroscopy, thermal analysis, powder SHG measurements and UV/Vis/NIR transmission. The specific heat has been determined to be 515.5 J?mol^?1?K^?1 at 300 K. CMTN possesses good physicochemical stability up to 128.5^°C, exhibits powder SHG efficiencies 0.8 times that of urea and its UV transparency cutoff is 358 nm. By the use of the DFT/B3LYP/6-31G(d) method, the microscopic second order NLO behavior of CMTN has been investigated by computing the first-order hyperpolarizability together with that of CdHg(SCN)₄ (CMTC) and CdHg(SCN)₄(C₃H₈O₂) (CMTG) crystals. The results have been explained based on their crystal structures.     

Resonantly pumped continuous wave Er:YAP laser

A continuous wave Er:YAP laser pumped by Mgo:PPLN laser locked at 1535 nm was reported. 170 mW of 1609 nm output was achieved under total incident pump power of 7 W at 77 K. The slope efficiency were 5.0 and 3.1% with the cavity length 75 and 140 mm.     

High-Power passively Q-switched 532 nm green laser by using Nd:YAG/Cr4+:YAG composite crystal

This paper reported a passively Q-switched 532 nm green laser of LD pumped V cavity structure by using Nd:YAG/Cr⁴⁺:YAG composite crystal and the type II phase matching KTP crystal. Under 19.4 W pump power, the average power of the laser pulse up to 1.83 W, with the pulse width of 93.2 ns and repetition frequency of 9.1 kHz.     

Biomimetic compound eye with a high numerical aperture and anti-reflective nanostructures on curved surfaces

Biomimetic compound eyes with a high numerical aperture on a curved surface were successfully fabricated by intelligent integration of traditional top-down and bottom-up micro- and nanofabrication methods together. In addition, the new hybrid micro- and nanofabrication method allows us to fabricate the antireflective nanostructures on each ommatidium to increase its vision sensitivity by improving the light transmission. The fabricated compound eye was optically characterized and was shown to have a numerical aperture of 0.77 for each ommatidium. Furthermore, it is shown that the transmission of the compound eye can be improved by 2.3% for the wavelength of 632.8 nm and a clearer image can be formed by the fabricated compound eye with antireflective nanostructures compared with that without antireflective nanostructures. In addition, the developed hybrid manufacturing method can be adapted to the fabrication of other complex micro- and nanodevices for photonics or other research areas.     

Uncertainty-based experimental validation of nonlinear reduced order models

This paper presents the first results of a combined experimental–computational investigation focused on the validation of reduced order models of geometrically nonlinear structures in the presence of uncertainty. The validation approach considered here is based on the premise that the model is valid if the experimental results can be considered as random sample responses of the stochastic system of which the reduced order model is the mean. For the situation considered here, the power spectra of the experiments should lie within the 2nd and 98th percentiles of the response (forming the uncertainty band) of the stochastic model. Nominally clamped–clamped beams are considered to demonstrate the entire process. The construction of two mean reduced order models and their stochastic counterparts are first performed. Then, the validation effort is carried out by comparing experimentally obtained power spectra and their corresponding computational uncertainty bands. This process leads, for both reduced order models, to a very good representation of the important upper envelope (98th percentile) of the experimental data but a less good fit of the lower envelope (2nd percentile).     

Size controlled synthesis of semiconductor nanocrystals in a continuous-flow mode microcapillary reactor

A microcapillary reactor with 320 μm inner diameter was utilized for CdSe nanoparticle synthesis. The influence of the reaction temperature and flow rate of precursors on the size and size distribution of prepared CdSe nanoparticles was systematically studied. The as-prepared nanoparticles exhibit sharp excitonic absorption and photoluminescence peak (FWHM 30 nm) with a quantum-yield around 10–40%. The microcapillary reactor was also used for CdSe/ZnS core-shell nanoparticle synthesis in continuous-flow mode. The quantum yield of the core-shell nanoparticles was found to be considerably influenced by the reactor temperature and have a close correlation with the thickness of ZnS shell under growth. An optimized quantum yield up to 70% was obtained for the CdSe/ZnS core-shell nanoparticles.     

Stable multiwavelength fiber ring laser with equalized power spectrum based on a semiconductor optical amplifier

We experimentally demonstrated a new structure of a multiwavelength semiconductor optical amplifier (SOA) ring laser based on a fiber Sagnac loop filter that can generate up to 25 stable output lasing wavelengths at room temperature. By varying the length of a polarization-maintaining (PM) fiber within the Sagnac loop filter, the wavelength spacing between the output lasing wavelengths can be changed to a desired value. By tuning a polarization controller (PC) within the Sagnac loop filter, stable multiwavelength 1550-nm operation with up to 17 lasing lines within 3 dB power level variation and with a wavelength spacing of ∼0.8 nm was achieved. The optical signal-to-noise ratios (OSNRs) of all the lasing wavelengths are greater than 40 dB.