APPLICATION OF BORON MODIFIED SILICA SOL ON RETENTION AND DRAINAGE

INTRODUCTIONRecently with the high speed, large-scale develop-ment of papermaking, in the manufacture of paper and paperboard conventional single and dual reten-tion and drainage systems cannot obtain satisfying re-tention and drainage. So in 1980 microparticulate systems appeared. Because of its superiority such as good retention effectiveness on fine and chemicals, improving drainage and paper formation, reducing waste water and enhancing the concentration of white water for good recover…     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

Lower-dimensional linear complementarity problem approaches to the solution of a bi-obstacle problem

A globally convergent Broyden-like method for solving a bi-obstacle problem is proposed based on its equivalent lower-dimensional linear complementarity problem. A suitable line search technique is introduced here. The global and superlinear convergence of the method is verified under appropriate assumptions.     

High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers.     

离心式风机导流器调节的经济性分析

全面分析和比较了G4－73型离心风机在较大负荷变化范围内分别采用轴向导流器调节和轴向导流器加双速电动机调节的运行经济性，对各种风机的节能具有重要的指导意义。     

A multifractal decomposition according to rate of returns

For one‐dimensional simple symmetric random walk, the Hausdorff and packing dimensions of sets of sample paths with prescribed rate of returns to the origin are determined. This gives a multifractal decomposition of the underlying sample space. (© 2007 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

三种饲料添加剂对幼兔增重及饲料转化率的对比试验

对新球虫灵,喹乙醇,免健宝Ⅰ号,Ⅱ号配套复合饲料添加剂进行的幼兔饲养对比试验结果表明:以免健宝Ⅰ、Ⅱ号配套复合饲料添加剂联合效果为最佳,其它依次为单用兔健宝Ⅱ号、兔健宝Ⅰ号、喹乙醇,新球虫灵。而且兔健宝Ⅰ、Ⅱ号配套复合饲料添加剂有易混匀,简化配合饲料工序、节省饲料及增重快等优点。     

奥氏体-贝氏体复相组织形态的研究

在60Si2MnA钢等温淬火工艺和性能研究的基础上,用MEF-3型金相显微镜和JEM-200CX型透射电子显微镜对等温转变产物的组织形态进行了观察研究。并用Rigku D/maxⅢB型X-射线衍射仪测定了样品的残余奥氏体体积分数。实验结果表明,奥氏体-贝氏体复相组织强韧性好的原因在于含有一定数量的残余奥氏体和变态贝氏体组织,且贝氏作为无碳化物贝氏体。     

Multibody dynamics of aircraft occupants seated behind interior walls

To improve aircraft crash safety, conditions critical to occupants survival during a crash must be known. In view of the importance of this problem, studies of post-crash dynamic behavior of victims are necessary in order to reduce severe injuries. In this study, crash dynamics program SOM-LA/TA, incorporating a dynamic model of the human body with a finite element model of the seat structure was used. Modifications were performed in the program for reconstruction of an occupant's head impact with the interior walls or bulkhead. A viscoelastic-type contact force model was used to represent the compliance characteristics of the bulkhead. Correlated studies of analytical simulations with impact sled test results were accomplished. A parametric study of the coefficients in the contact force model was then performed in order to obtain the correlations between the coefficients and the Head Injury Criteria. A measure of optimal values for the bulkhead compliance and displacement requirements was thus achieved in order to keep the possibility of a head injury as little as possible. This information could in turn be used in the selection of suitable materials for the bulkhead, instrument panel, or interior walls of an aircraft.     

Three classes of smooth Banach submanifolds in B(E,F)

Let E, F be two Banach spaces, and B(E, F), Φ(E, F), SΦ(E, F) and R(E,F) be the bounded linear, Fredholm, semi-Frdholm and finite rank operators from E into F, respectively. In this paper, using the continuity characteristics of generalized inverses of operators under small perturbations, we prove the following result Let ∑ be any one of the following sets {T ∈ Φ(E, F) IndexT =const, and dim N(T) = const.}, {T ∈ SΦ(E, F) either dim N(T) = const. ＜ ∞ or codim R(T) = const.＜ ∞} and {T ∈ R(E, F) RankT =const.＜∞}. Then ∑ is a smooth submanifold of B(E, F) with the tangent space TA∑ = {B ∈ B(E,F) BN(A) (∪) R(A)} for any A ∈ ∑. The result is available for the further application to Thom's famous results on the transversility and the study of the infinite dimensional geometry.