Thermal stability and flammability of styrene–butadiene rubber (SBR) composites

The article presents the effect of attapulgite (ATT) and its synergic action with carbon or silica on the thermal properties and flammability of cross-linked styrene–butadiene rubber. It has been shown that ATT is active filler improving the thermal and mechanical properties of composites containing this aluminosilicate. The decreased flammability of vulcanizates containing ATT compared to that of unfilled vulcanizates results from good insulating properties of the ATT used. The considerable reduction in the flammability of composites containing ATT and carbon nanofiber or silica is connected, first of all, with the formation of a homogeneous boundary layer.     

Rearrangement of hexadecane molecules confined in the nanopores of a controlled pore glass using positron annihilation and differential scanning calorimetry

The solidification/melting of cetane confined in nine silica glasses with specific controlled pores (CPG) with different pore sizes (r _p ranging from 3.7–72 nm) has been studied. Samples with variable coefficient of filling of cetane were prepared and analyzed. Combining the indication of the evolving solidification heats (via differential scanning calorimetry, DSC) with the lifetime spectra of positron annihilation, the mechanism of filling of cetane molecules in the pores of the hosting silica glass matrices has been searched. Three independent solidification effects—three independent DSC peaks—were observed in each measuring cycle, namely one crystallization exotherm Rb of the bulk-cetane (if present) and two crystallization sub-peaks Rc1 and Rc2 of the confined cetane in the case of continuous cooling. The temperatures of both Rc1 and Rc2 effects decrease on decreasing the r _p of the CPG matrix. The mutual relation between Rc1 and Rc2 has been analyzed. The kinetics of all three steps of the solidification in the continuous-cooling as well as isothermal regimes have been specified.     

Improved electrochemical performance of nano-crystalline Li2FeSiO4/C cathode material prepared by the optimization of sintering temperature

Li₂FeSiO₄/C cathode materials have been prepared using the conventional solid-state method by varying the sintering temperature (650 °C, 700 °C and 750 °C), and the structure and electrochemical performance of Li₂FeSiO₄/C materials are investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), galvanostatic charge–discharge tests, respectively. The results show that Li₂FeSiO₄ nano-crystals with a diameter of about 6–8 nm are inbedded in the amorphous carbon, and the Li₂FeSiO₄/C material obtained at 700 °C exhibits an initial discharge capacity of 195 mA?h g^?1 at 1/16 C in the potential range of 1.5–4.8 V. The excellent electrochemical performance of Li₂FeSiO₄/C attributes to the improvement of conductivity and reduction of impurity by the optimization of the sintering temperature.     

3,4-Dinitrobenzamide Functionalized CdTe/ZnTe Quantum Dots as a Nanoprobe for Imaging Glutathione S-Transferase in Living Cells

A novel fluorescent nanoprobe for glutathione S‐transferase (GST) has been developed by incorporating 3,4‐dinitrobenzamide (a specific substrate of GST) onto CdTe/ZnTe quantum dots. The probe itself displays a low background signal due to the strong quenching effect of the electron‐withdrawing unit of 3,4‐dinitrobenzamide on the quantum dots. However, GST can efficiently catalyze the nucleophilic substitution of reduced glutathione on the p‐nitro group of the nanoprobe, leading to a large fluorescence enhancement. Most notably, this enhancement shows high selectivity and sensitivity towards GST instead of the other biological substances. With this nanoprobe, a simple fluorescence imaging method for intracellular GST has been established, and its applicability has been successfully demonstrated for imaging GST in different living cells, which reveals that A549 cells express GST about 3 times higher than NIH‐3T3 and Hela cells.     

Deep extractive desulfurization of diesel fuels by FeCl3/ionic liquids

The extractive desulfurization of dibenzothiophene（DBT）,benzothiophene（BT）,and 4,6-dimethyldi-benzothiophene （4,6-DMDBT） in model oil was carried out using anhydrous FeCl₃ and 1-methyl-3-octylimidazolium chloride system（[Omim|Cl·2FeCl₃）.This new system exhibited high extractive efficiency and the sulfur removal of DBT in model oil(V_IL/V_oil=1/20) could reach 99.4%at room temperature for 30 min,which was obviously superior to single[Omim]Cl as extractant（22.9%）.When the[Omim|CI·2FeCl₃ was used,the S-removal of 4,6-DMDBT and BT could also be up to 99.3%and 96.2%, respectively.Moreover,the ionic liquid could be recycled five times without a significant decrease in extractive ability.     

Enantiomeric separations of four basic drugs containing N-alkyl groups by a RP-HPLC system using SBE-β-CD as chiral mobile phase additive

The chiral separations of four pharmaceutical racemates which contain N-alkyl groups were satisfactorily resolved using SBE-β-CD as a chiral mobile phase additive(CMPA)in a RP-HPLC system(the resolution is 2.701 for ondansetron hydrochloride,1.996 for sulpiride,1.293 for clenbuterol hydrochloride and 0.816 for omeprazole).In addition,the effects of different parameters such as CD type and CD concentration were investigated.The separation mechanism arises through the combination of several potential interactions,including electrostatic interactions as well as hydrogen bonding interactions and hydrophobic inclusion interactions,which allow for the SBE-β-CD–drug complexation with strong stereoselectivity and stability.The resolution also relates to the number and location of N atoms in the enantiomers.This method will be applicable to the isolation of various types of biologically important enantiomers containing N-alkyl groups.