A TLC Study of the lipophilicity of thirty-two acetylcholinesterase inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives

The lipophilicity of thirty-two novel acetylcholinesterase (AChE) inhibitors — 1,2,3,4-tetrahydroacridine and 2,3-dihydro-1H-cyclopenta[b]quinoline derivatives was studied by thin layer chromatography. The analyzed compounds were chromatographed on RP-18, RP-8, RP-2, CN and NH₂ stationary phases with dioxane — citric buffer pH 3.0 binary mobile phases containing different proportions of dioxane. R_M values for pure water were extrapolated from the linear Soczewiński-Wachtmeister equation and six compounds with known literature log P values were used as reference calibration data set for computation of experimental log P values. The obtained results were compared with computationally calculated partition coefficients values (AlogPs, AClogP, AlogP, MlogP, KOWWIN, XlogP2, XlogP3) by PCA and significant differences between them were observed.     

Promotion effect of adsorbed water/OH on the catalytic performance of Ag/activated carbon catalysts for CO preferential oxidation in excess H2

Activated carbon (AC) supported silver catalysts were prepared by incipient wetness impregnation method and their catalytic performance for CO preferential oxidation (PROX) in excess H₂ was evaluated. Ag/AC catalysts, after reduction in H₂ at low temperatures (≤200 °C) following heat treatment in He at 200 °C (He200H200), exhibited the best catalytic properties. Temperature-programmed desorption (TPD), X-ray diffraction (XRD) and temperature-programmed reduction (TPR) results indicated that silver oxides were produced during heat treatment in He at 200 °C which were reduced to metal silver nanoparticles in H₂ at low temperatures (≤200 °C), simultaneously generating the adsorbed water/OH. CO conversion was enhanced 40% after water treatment following heat treatment in He at 600 °C. These results imply that the metal silver nanoparticles are the active species and the adsorbed water/OH has noticeable promotion effects on CO oxidation. However, the promotion effect is still limited compared to gold catalysts under the similar conditions, which may be the reason of low selectivity to CO oxidation in PROX over silver catalysts. The reported Ag/AC-S-He catalyst after He200H₂00 treatment displayed similar PROX of CO reaction properties to Ag/SiO₂. This means that Ag/AC catalyst is also an efficient low-temperature CO oxidation catalyst.     

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural catalyzed by AlCl3·6H2O/BF3·(Et)2O in ethanol

Direct conversion of fructose-based carbohydrates to 5-ethoxymethylfurfural (EMF) catalyzed by Lewis acid in ethanol was investigated. It was found that BF₃·(Et)₂O was favorable for 5-hydroxymethylfurfural (HMF) etherification to EMF. BF₃·(Et)₂O combination with AlCl₃·6H₂O with the molar ratio of 1 was an effective catalyst system for synthesis of EMF from fructose-based carbohydrates. 55.0%, 45.4% and 23.9% of EMF yields were obtained from fructose, inulin and sucrose under optimized conditions, respectively.     

Amperometric detection of nitrite based on Dawson-type vanodotungstophosphate and carbon nanotubes

A nitrite sensor based on Dawson vanodotungstophosphates α₂-K₇P₂VW₁₇O₆₂·18H₂O (P₂W₁₇V) and carbon nanotubes (CNTs) was prepared by electrostatic layer-by-layer self-assembly technique. The sensor {PEI/PSS/[PDDA/P₂W₁₇V-CNTs]_n} was characterized by UV–vis spectroscopy, atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray photoelectron spectra (XPS). The electron transfer and sensing ability of this sensor were explored using cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) technology. The results show that the incorporation of CNTs and P₂W₁₇V into the composite film endowed the modified electrode with fast transfer rate and high electrocatalytic activity towards oxidation of nitrite. This nitrite sensor with 10 bilayers has a broad linear range of 5 × 10⁻⁸ to 2.13 × 10⁻³ M, a low detection limit of 0.0367 μM (S N⁻¹ = 3), a high sensitivity of 0.35 mA mM⁻¹ NO₂⁻, an excellent anti-interference property in the presence of other potential interfering species and a good stable. It was successfully employed for determination of nitrite in real towards.     

High sensitivity chemiluminescence enzyme immunoassay for detecting staphylococcal enterotoxin A in multi-matrices

In this study, detection of staphylococcal enterotoxin A (SEA) in multi-matrices using a highly sensitive and specific microplate chemiluminescence enzyme immunoassay (CLEIA) has been established. A pair of monoclonal antibodies (mAbs) was selected from 37 anti-SEA mAbs by pairwise analysis, and the experimental conditions of the CLEIA were optimized. This CLEIA exhibited high performance with a wide dynamic range from 6.4 pg mL⁻¹ to 1600 pg mL⁻¹, and the measured low limit of detection (LOD) was 3.2 pg mL⁻¹. No cross-reactivity was observed when this method was applied to test SEB, SEC1, and SED. It has also been successfully applied for analyzing SEA in a variety of environmental, biological, and clinical matrices, such as sewage, tap water, river water, roast beef, peanut butter, cured ham, 10% nonfat dry milk, milk, orange juice, human urine, and serum. Thus, the highly sensitive and SEA-specific CLEIA should make it attractive for quantifying SEA in public health and diagnosis in near future.     

Controlling the optimum surfactants concentrations for dispersing carbon nanofibers in aqueous solution

As a new nano-scale functional material, it is necessary to achieve a uniform distribution in the composites for gaining the CNFs’ excellent reinforcing effect. In this paper, CNFs were purified by the method of high temperature annealing treatment. Six surfactants, methylcellulose (MC), hydroxypropyl methylcellulose (HPMC), sodium dodecyl sulfate (SDS), dodecylamine (DDA), N, N-dimethyl formamide (DMF) and cetyltrimethyl ammonium bromide (CTAB) were used individually and combinatorially in a certain concentration to disperse the CNFs in aqueous solution. To achieve a good dispersion of the CNFs, a method utilizing ultrasonic processing was employed. The CNFs treated by the method of high temperature annealing treatment were characterized by differential thermal analysis (DTA) and thermogravimetry analysis (TGA), and the ultrasonication-driven dispersion of CNFs in aqueous solutions were monitored by UVvis spectroscopy and transmission electron microscopy (TEM). The experiments reveal that the method of high temperature annealing treatment purified the CNFs and the maximum achievable dispersion of CNFs corresponds to the maximum UV absorbance of the solution. All results show that the surfactants mixture of MC and SDS in a certain concentration of 0.4 and 2.0 g/L has the maximum dispersion effect on CNFs in aqueous solution, the optimum concentration ratio of MC, SDS, and CNFs was 2: 10: 1.     

Cu(OTf)2-Catalyzed 1,2,3-triazole-ring-controlled selective phenolic O–H bond methylthiomethylation

Copper-catalyzed selective methylthiomethylation of 1,4-disubstituted 1,2,3-triazole phenols using DMSO as a methylthiomethylation reagent was achieved. Controlled by the triazole ring, the ortho-phenolic hydroxyl in N(1) aryl can be selectively methylthiomethylated, generating functionalized 1,4-disubstituted 1,2,3-triazoles bearing aryl methylthiomethyl ether fragment.     

L ‐Proline‐Promoted CuI‐Catalyzed C‐S Bond Formation between Aryl Iodides and Thiols

An improved, mild procedure for the CuI‐catalyzed coupling reactions of aryl iodides with aliphatic and aromatic thiols, using L ‐proline as the ligand, is reported. This procedure is noteworthy given its high generality and exceptional level of functional group toleration.