沉降比在活性污泥法处理污水中的作用

通过分析沉降变化规律与其他有关参数之间的对应关系，旨在掌握和控制活性污泥法工艺处理污水的工艺运行情况，使处理后水质稳定达标。     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

中性磷萃淋树脂吸附铼的性能和机理研究ⅢCL－P＿（350）－KReO＿4－HNO＿3体系

本文报道四甲基膦酸二甲庚酸萃淋树脂（ＣＬ－Ｐ＿（３５０）从硝酸溶液中吸附鳞的性能和机理研究。实验结果表明，吸附平衡服从Ｌａｎｇｍｕｉｒ经验等温式。测得吸附物分子中Ｐ（３５０）与Ｒｅ（Ⅶ）的摩尔比为２：１。Ｒｅ（Ⅶ）是以形式被树脂吸附，其吸附机理属于综合反应：并测定了吸附过程的热力学函数。     

t—BuNO二聚体在不同溶剂中裂解机理的研究

本文利用＾１ＨＮＭＲ，ＵＶ－Ｖｉｓ方法，研究了ｔ－ＢｕＮＯ二聚体在有机溶剂及水溶液中的裂解反应产物，分析了其反应的动力学，提出了在非极性的有机相中ｔ－ＢｕＮＯ二聚体为均裂反应，而在极性的水相中为均裂和异裂同时进行的竞争反应。     

Angular momentum effect in prescission particle multiplicities for a light system by diffusion model

The effect of angular momentum on the competition between fission and particle emission during light system fission process was studied via fission diffusion model. The prescission particle multiplicities were found to increase with decreasing angular momentum. The experimental prescission proton and α particle multiplicities can be fitted for 10.6 MeV/nucleon ⁸⁴Kr(²⁷Al,binary fission) reaction with this model. Entrance channel effect found in [1] is proved to be angular momentum effect.     

SOLVABILITY OF FORWARD-BACKWARD SDES AND THE NODAL SET OF HAMILTON-JACOBI-BELLMAN EQUATIONS

The solvability of a class of forward-backward stochastic differential equations (SDEs for short) over an arbitrarily prescribed time duration is studied. The authors design a stochastic relaxed control problem, with both drift and difftusion all being controlled, so that the solvability problem is converted to a problem of finding the nodal set of the viscosity solution to a certain Hamilton-Jacobi-Bellman equation. This method overcomes the fatal difficulty encountered in the traditional contraction mapping approach to the existence theorem of such SDEs.     

GS-221高速摄影测量仪测角信息的采集与处理

在GS-221高速摄影测量仪中,测角信息采集与处理速度的快慢是重要性能指标之一。本文讨论了如何在尽可能短的时间内对测角信息进行采集和处理的软件实现方法。     

吹气孔直径对RH精炼过程钢液流动和混合特性的影响

针对90t RH精炼装置,以水力学模拟研究了吹气孔直径对真空循环精炼过程中钢液流动和混合特性的影响.模型和原型的相似比为15.模型吹气孔直径分别为0.8 mm和1.2 mm.结果表明,1.2 mm孔径下环流量和主要工艺参数间的关系为Ql Q80.26Du0.69Dd0.80;在给定的吹气量和插入管内径下,增大吹气孔直径并不显著改变精炼过程中钢液流动特征,环流量随吹气孔直径的增大而略有增大,其关系式为Ql=2.40Q 0.23gD0.72u D0.88d d0.13in;相应地,混合时间稍有缩短;0.8和1.2 mm孔径下,τm与搅拌能密度的关系分别为τm ε5和τm ε0.49.     

一种新型有机电致微腔结构的双模发射

采用结构Glass／DBR／ITO／NPB／NPB：Alq／Alq／Al制作了有机微腔电致发光器件。将空穴传输材料与发光材料以一定比例混合作为发光层，为了便于对比，在不改变有机层的膜厚的情况下同时制作了传统的异质结微腔器件，发现两种器件的发光光谱有很大不同，器件的复合效率与传统的异质结器件相比也得到了很大提高，这是因为将两种有机材料混合能消除界面势垒，提高器件的复合效率，从而提高了器件的发光性能，实现了微腔双模发射，且两个模式的半峰全宽分别为8nm和12nm。通过进一步优化器件结构可以实现微腔白光发射。     

BP网络及其应用

基函数选取和系数求解是函数逼近中的两个关键问题,目前广泛应用的回归分析或其它映射方法均有局限性。采用人工神经网络中的BP网较好地解决了这两个问题,对理论和实际的数据进行了比较与验证,结果表明.BP网络有助于提高数据处理的可靠性与预测的精度.